Overpower

The AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5060 combination places at rank 903 out of 1744 tested combos in Overpower. This positions the pairing in the lower-middle segment of the database, meaning that while it delivers playable performance, a significant portion of the tested hardware configurations outperform it. The percentile data for the individual components supports this placement: the CPU sits at the 77th percentile among all processors, while the GPU ranks at the 73rd percentile among all graphics cards. The combo’s overall rank reflects a balance where neither component is a standout, but both are competent enough to produce a coherent gaming experience. In practical terms, this rank suggests the pairing is a dependable mid-tier option rather than a high-performance outlier.

How This Combo Ranks

The combo’s rank of 903 out of 1744 places it just past the halfway point of the database, indicating that it is neither a top-tier performer nor a low-end compromise. The CPU’s average benchmark score of 19616 puts it within 0.7% of the Intel Core i7-10700F and 0.6% of the AMD Ryzen 5 7530U, while it trails the Intel Core i5-11600KF by 0.6%. This tight clustering around the 19600-19700 score range shows that the Ryzen 5 2600 is effectively matched with several modern mid-range processors, despite being an older 2000-series part. The GPU’s average score of 30109 is nearly identical to the AMD Radeon RX 7700 XT, with a delta of 0%, and it sits marginally ahead of the NVIDIA Tesla M60 by 0.5% and the RTX 5070 Mobile by 0.6%. This near-exact alignment with the RX 7700 XT suggests the RTX 5060 delivers comparable rasterization performance in this game. Given these component-level standings, the combo rank of 903 is consistent with a system where both parts perform at their expected mid-tier level without any bottlenecks skewing the overall result.

GPU Role

The RTX 5060’s 8 GB of GDDR7 memory on a 128-bit bus provides a bandwidth of 448.0 GB/s, which is substantial for a card in this class. In Overpower, the memory configuration appears sufficient to handle the game’s demands at the tested settings, as the frame rates scale consistently with resolution changes. The GPU’s boost clock of 2497 MHz and base clock of 2280 MHz, combined with 3840 shading units, deliver a FP32 throughput of 19.18 TFLOPS. This computational capacity translates directly to the measured performance: at 1080p High, the combo achieves 93.2 FPS, which climbs to 149.7 FPS at Low settings. The data shows that the GPU is the primary driver of frame rate in this pairing, as the CPU’s older Zen architecture does not appear to constrain the GPU’s output at lower resolutions. The GPU’s PassMark G3D score of 20891 and Geekbench OpenCL score of 120785 reinforce its capability to handle the graphical load of Overpower without significant strain. The 30 RT cores and 120 tensor cores suggest the card is also prepared for ray-traced workloads, though the measured data does not include such scenarios.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling from 1080p to 4K, with frame rates dropping consistently as resolution increases. At High settings, the combo delivers 93.2 FPS at 1080p, 85 FPS at 1440p, and 69.8 FPS at 4K. This represents a 7.8% drop from 1080p to 1440p, followed by a 17.9% drop from 1440p to 4K, indicating that the GPU becomes progressively more loaded as pixel count rises. The same trend appears at Medium settings, where the frame rates are 103.7 FPS at 1080p, 89.2 FPS at 1440p, and 78.2 FPS at 4K, with a 14% drop between 1080p and 1440p and a 12.3% drop to 4K. At Low settings, the scaling is less severe: 149.7 FPS at 1080p, 139.4 FPS at 1440p, and 124.3 FPS at 4K, with drops of 6.9% and 10.8% respectively. The relatively modest drop from 1080p to 1440p at Low settings suggests that the CPU is beginning to play a larger role at lower graphical loads, as the GPU has spare capacity to render more pixels. However, at High and Medium settings, the GPU’s workload increases sufficiently to become the limiting factor, as evidenced by the larger frame rate declines at higher resolutions. The Ultra preset shows the steepest scaling, falling from 77 FPS at 1080p to 68.9 FPS at 1440p and 59.3 FPS at 4K, a 10.5% drop followed by a 13.9% drop, confirming that the GPU is fully utilized at this quality level.

Settings Recommendations

Based on the measured rows, the most balanced experience comes from the High preset, which provides a solid frame rate at all tested resolutions. At 1080p, High delivers 93.2 FPS, which is comfortably above the 60 FPS threshold for smooth gameplay, and even at 4K, the 69.8 FPS average remains playable. The Medium preset offers a slight improvement, with 103.7 FPS at 1080p and 78.2 FPS at 4K, but the visual fidelity gain from High over Medium is typically worth the modest frame rate cost in this game. The data shows that the gap between Medium and High is relatively small — about 10 FPS at 1080p — while the gap between High and Ultra is more pronounced, with Ultra dropping to 77 FPS at 1080p and 59.3 FPS at 4K. This suggests that Ultra may stress the GPU unnecessarily for marginal visual improvements, especially at higher resolutions where the frame rate dips below the 60 FPS target. For users prioritizing frame rate, the Low preset at 1080p yields 149.7 FPS, which is ideal for high-refresh-rate displays, but the visual compromise is significant. The recommended approach is to use High settings for the best combination of image quality and performance, with Medium as a fallback if a higher frame rate is desired at 4K.

FAQ

Q: What is the combo’s overall rank in Overpower?

A: The AMD Ryzen 5 2600 and RTX 5060 combination ranks 903 out of 1744 tested combos, placing it in the lower-middle tier of the database.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 2600’s average benchmark score of 19616 is 0.6% higher than the AMD Ryzen 5 7530U and 0.7% higher than the Intel Core i7-10700F, while it trails the Intel Core i5-11600KF by 0.6% and the Intel Core i5-1345U by 0.4%.

Q: What frame rate can I expect at 1080p with High settings?

A: The combo achieves an average of 93.2 FPS at 1920x1080 with High settings, which is suitable for smooth gameplay on standard 60 Hz monitors.

Q: Is the RTX 5060 comparable to any other GPU in the database?

A: The GPU’s average score of 30109 is exactly matched by the AMD Radeon RX 7700 XT, with a delta of 0%, and it is 0.5% ahead of the NVIDIA Tesla M60 and 0.6% ahead of the RTX 5070 Mobile.

Q: How does performance scale from 1080p to 4K at Ultra settings?

A: At Ultra settings, the frame rate drops from 77 FPS at 1080p to 68.9 FPS at 1440p and 59.3 FPS at 4K, representing a 10.5% drop and then a 13.9% drop respectively.

Q: Which settings preset provides the best experience?

A: The High preset offers the best balance, with 93.2 FPS at 1080p, 85 FPS at 1440p, and 69.8 FPS at 4K, providing playable frame rates at all resolutions without the performance penalty seen at Ultra.