Overpower

The AMD Ryzen 5 2600 and AMD Radeon RX 570 pairing in Overpower presents a study in legacy hardware balancing. The data places this combo at rank 3556 out of 3713 tested configurations, placing it in the bottom 5% of all tested combos. This is a pairing of a 2018 six-core processor with a 2017 Polaris-based graphics card, and the measured FPS results across resolutions and settings reveal a system that is consistently GPU-bound but with CPU limitations becoming apparent at lower settings. The following analysis breaks down the specific roles each component plays in this game's performance profile.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, built on the Zen architecture (specifically Zen+ Pinnacle Ridge). It operates with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. In the context of Overpower, an Action game, this CPU's 12 threads provide a solid foundation for modern game logic, physics, and AI tasks. The processor's cache structure includes 96 KB of L1 per core, 512 KB of L2 per core, and a 16 MB shared L3 cache, which is adequate for feeding the GPU in most scenarios.

The CPU's benchmark scores paint a picture of mid-range capability. Its Geekbench multicore score of 5648 and single-core score of 1154 indicate that while it can handle multi-threaded workloads, its single-thread performance is modest by modern standards. The Cinebench R15 scores of 1248 (multi-core) and 157.3 (single-core) further confirm this. In terms of its standing, the CPU sits at the 75th percentile among all CPUs, with an average benchmark score of 21484. Its nearest rivals include the Intel Core Ultra 5 228V (0.2% ahead), Intel Core i9-11900H (0.5% ahead), and AMD EPYC 9454 (1.2% ahead), showing that it is statistically very close to these very different processors in aggregate performance.

In Overpower, the CPU's influence is most visible when comparing FPS at different settings. Looking at 1080p, the jump from Low (62 FPS) to Medium (39 FPS) is a dramatic 23 FPS drop. This suggests that at Low settings, the game is likely rendering fewer draw calls or physics calculations, allowing the CPU to keep up with the GPU's frame delivery. However, as settings are increased to Medium and beyond, the workload on the CPU rises, but the data shows that the primary limiter is the GPU. The CPU's Passmark multithread score of 13160 and single-thread score of 2239 indicate that it is not a bottleneck at 1080p High (36 FPS), where the GPU is clearly maxed out. The CPU's role here is to avoid becoming a limiting factor, which it does, albeit without headroom.

The data suggests that the Ryzen 5 2600 is sufficient to feed the RX 570 at all tested settings. If the CPU were the primary bottleneck, we would expect to see less variation in FPS between Low and Ultra settings at the same resolution. Instead, we see a clear decline from 62 FPS at Low to 30 FPS at Ultra at 1080p, which is characteristic of a GPU-limited scenario. The CPU's 65W TDP and AM4 socket also point to it being an efficient, entry-level part that pairs naturally with an older mid-range GPU like the RX 570.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 570 is the unequivocal performance limiter in this combo. This GPU features 4 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 224.0 GB/s. Its clock speeds are set at a base of 1168 MHz and a boost of 1244 MHz, with memory running at 1750 MHz (7 Gbps effective). The GPU's compute power is rated at 5.095 TFLOPS FP32, with a pixel rate of 39.81 GPixel/s and a texture rate of 159.2 GTexel/s. The 4 GB VRAM is a critical factor in Overpower, especially at higher resolutions where texture data exceeds this capacity.

The GPU's benchmark results include a 3DMark Steel Nomad DX12 score of 880, a Geekbench Vulkan score of 42752, and an OpenCL score of 32084. It sits at the 74th percentile among all GPUs, with an average benchmark score of 28766. Its nearest rivals are the AMD Radeon RX 6800M (0.4% behind), AMD Radeon R9 M295X (0.7% ahead), and AMD Radeon RX 470 (0.8% behind). This places the RX 570 in a performance bracket that is competitive with much newer mobile parts, but its 4 GB VRAM is a significant limitation for modern titles.

In Overpower, the GPU's VRAM and raw throughput directly dictate the FPS outcomes. At 4K Ultra, the combo manages only 23 FPS, while at 4K Low it reaches 47 FPS. This is a clear indicator that the GPU is overwhelmed by the pixel count. The 4 GB VRAM likely causes texture thrashing at 4K Ultra, where the game's high-resolution textures exceed the available memory, leading to severe frame drops. Even at 1440p, the GPU struggles, with Ultra at 27 FPS and High at 32 FPS. The 1080p results are more playable, but the GPU still limits performance to 30 FPS at Ultra and 36 FPS at High.

The data shows that the RX 570's performance is heavily dependent on settings. The jump from 47 FPS at 4K Low to 29 FPS at 4K Medium is a 18 FPS drop, indicating that the Medium preset introduces significant shader and lighting complexity that the GPU cannot handle. The GPU's role is thus to be the primary bottleneck in all scenarios, with its 4 GB VRAM and 5.095 TFLOPS compute capability proving insufficient for high-fidelity settings at higher resolutions.

FAQ

*Q: What is the best resolution for this combo in Overpower?*

A: The data shows that 1920x1080 is the only resolution where the combo achieves playable frame rates across all settings. At 1080p, the average FPS ranges from 62 at Low to 30 at Ultra. At 1440p, the range drops to 55-27 FPS, and at 4K, it falls to 47-23 FPS.

Q: Is the CPU or GPU the primary bottleneck in this system?

A: The benchmark results indicate the GPU is the clear bottleneck. For example, at 1080p, dropping from Low to Medium settings reduces FPS from 62 to 39, a 37% performance hit. This is a GPU workload increase, not a CPU limitation. The CPU's single-thread score of 2239 is sufficient to drive the GPU at these frame rates.

*Q: How does this combo rank against other tested systems in Overpower?*

A: This combo ranks 3556 out of 3713 tested combos, placing it in the bottom 4.2% of all systems. This is a very low rank, indicating that most other hardware pairings deliver better performance in this game.

*Q: Can this system handle 4K gaming in Overpower?*

A: No, the data shows it cannot. At 4K, the best average FPS is 47 at Low settings, but this drops to 23 FPS at Ultra. Even at Low, 47 FPS is below the 60 FPS target for smooth gameplay, and the 4 GB VRAM is likely a limiting factor.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 1440p, the average FPS drops from 55 at Low to 27 at Ultra, a 28 FPS difference. This represents a 51% reduction in frame rate, showing that the Ultra preset is far too demanding for the RX 570 at this resolution.

*Q: Is the 4 GB VRAM of the RX 570 a problem for Overpower?*

A: Yes, the data suggests it is. At 4K Ultra, the combo only achieves 23 FPS, and at 4K Medium it manages 29 FPS. These low scores are consistent with the GPU running out of VRAM, causing significant stutters and frame drops as textures are swapped in and out.

Measured FPS Breakdown

The measured FPS data for this combo reveals a consistent pattern of GPU-bound performance across all resolutions. At 1920x1080, the average frame rates are 62 FPS at Low, 39 FPS at Medium, 36 FPS at High, and 30 FPS at Ultra. The Medium preset has a minimum FPS of 33 and a maximum of 45, showing some variance but remaining stable. At 2560x1440, the average FPS drops to 55 at Low, 35 at Medium, 32 at High, and 27 at Ultra. The Medium preset at 1440p shows a minimum of 29 and a maximum of 40. At 3840x2160, the average FPS is 47 at Low, 29 at Medium, 27 at High, and 23 at Ultra. The Medium preset at 4K has a minimum of 25 and a maximum of 34.

The data shows a steep drop-off when moving from Low to Medium settings at all resolutions. At 1080p, the drop is from 62 to 39 FPS (a 23 FPS decrease). At 1440p, it drops from 55 to 35 FPS (a 20 FPS decrease). At 4K, it drops from 47 to 29 FPS (an 18 FPS decrease). This suggests that the Medium preset introduces a significant computational load on the GPU, likely related to lighting and shadow effects. The step from Medium to High is smaller, with drops of 3 FPS at 1080p, 3 FPS at 1440p, and 2 FPS at 4K. The step from High to Ultra is also consistent, with drops of 6 FPS at 1080p, 5 FPS at 1440p, and 4 FPS at 4K.

These numbers indicate that the RX 570's performance scales almost linearly with resolution, halving the FPS at 4K compared to 1080p at the same settings. For example, at High settings, the FPS goes from 36 at 1080p to 32 at 1440p to 27 at 4K. This is a clear sign that the GPU is the sole limiting factor, as the CPU is not showing any signs of bottleneck at these frame rates.

Resolution Scaling

The resolution scaling of this combo in Overpower is steep and predictable. Moving from 1080p to 1440p at High settings reduces the average FPS from 36 to 32, a 11% drop. Moving from 1440p to 4K at High settings reduces the average FPS from 32 to 27, a 16% drop. The overall drop from 1080p to 4K at High is from 36 to 27 FPS, a 25% reduction. At Low settings, the drop is from 62 FPS at 1080p to 55 FPS at 1440p to 47 FPS at 4K, a total reduction of 24%.

This scaling pattern indicates that the GPU is the limiting component. If the CPU were the bottleneck, we would expect the FPS to remain relatively constant across resolutions at the same settings, as the CPU workload does not change significantly with resolution. Instead, the FPS drops proportionally with the number of pixels rendered. The 4 GB VRAM is also a likely contributor to the steep drop at 4K, as the GPU may be forced to use slower memory swapping for textures that exceed its capacity.

The data shows that this combo is not suitable for 4K gaming in Overpower, as even at Low settings, the 47 FPS average is below the 60 FPS target. At 1440p, the combo is marginal, with only Low settings (55 FPS) achieving a playable frame rate. The 1080p resolution is the sweet spot, where all settings are at least 30 FPS, and Low settings achieve a smooth 62 FPS.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the desired frame rate target. For a 60 FPS experience, the only option is 1080p with Low settings, which delivers 62 FPS. For a 30 FPS experience, which is the baseline for console-like playability, the combo can handle 1080p at Ultra (30 FPS), 1440p at High (32 FPS), and 4K at Medium (29 FPS). However, the 4K Medium option has a minimum FPS of 25, which may cause noticeable stutters.

The best balance of visual quality and performance is likely 1080p at High settings (36 FPS). This provides a decent visual upgrade over Low settings while maintaining a frame rate that is above 30 FPS. For players who prioritize smoothness, 1080p at Medium (39 FPS) is a good choice, as it offers a 3 FPS improvement over High with similar visual quality. At 1440p, the recommendation is Low settings (55 FPS) if a higher resolution is desired, but the visual quality will be significantly reduced compared to 1080p Medium. At 4K, the data shows that this combo is not capable of providing a consistent experience, with the best option being Low settings at 47 FPS, which is still below the 60 FPS target.

The data suggests that the Ultra preset is not worth the performance cost. At 1080p, Ultra (30 FPS) is only 6 FPS slower than High (36 FPS), but the visual difference is often minimal in action games. The Medium preset offers the best balance of performance and fidelity, as it is the only preset that provides a stable frame rate with a minimum FPS above 30 at 1080p (33 FPS minimum).

How This Combo Ranks

This combo ranks 3556 out of 3713 tested combos in Overpower, placing it in the bottom 4.2% of all systems tested. This is a very low rank, indicating that the vast majority of hardware pairings deliver better performance in this game. The rank is a reflection of the RX 570's 4 GB VRAM and relatively low compute power (5.095 TFLOPS), which are insufficient for a modern action game like Overpower.

The CPU's rank is 75th percentile, which is mid-range, but the GPU's rank is 74th percentile, which is also mid-range. However, the combination of the two parts results in a very low ranking in this specific game. This suggests that Overpower is particularly demanding on the GPU, and the RX 570's limitations are magnified in this title. The data shows that the combo is only playable at 1080p, which is a significant limitation for a game released in 2023.

The low rank also indicates that the RX 570 is not well-suited for modern gaming, as its 4 GB VRAM is below the 6-8 GB standard for current titles. The combo's performance is comparable to what would be expected from a budget system from 2017-2018, and the data confirms that it is ill-equipped for Overpower's demands. For users with this combo, the data suggests that lowering settings and resolution is the only way to achieve a playable experience, and even then, the system will struggle to maintain high frame rates.