Overpower
This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 46 | 57 | 62 | 99 |
| 1440p QHD | 57 | 64 | 70 | 115 |
| 1080p Full HD | 64 | 76 | 80 | 131 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 2600 + AMD Radeon RX 6600 XT, In-Depth Analysis
The AMD Ryzen 5 2600 paired with the AMD Radeon RX 6600 XT delivers its most compelling performance at 1080p, where the combination achieves a 131.4 FPS average on Low settings, but the data reveals a system that becomes progressively more GPU-bound as resolution increases. In Overpower, this combo ranks 1257th out of 1744 tested combinations, placing it in the lower-middle tier of the database, yet the measured frames per second show a configuration capable of smooth gameplay at multiple quality presets, provided expectations are calibrated to the resolution.
Resolution Scaling
The scaling behavior from 1080p to 4K in Overpower demonstrates a classic GPU-limited curve, with the most dramatic drop occurring between 1080p and 1440p on lower settings. At Low settings, the average frame rate falls from 131.4 FPS at 1920x1080 to 114.7 FPS at 2560x1440, a decline of 12.7% that indicates the CPU is still feeding the GPU adequately at the lower resolution. The same settings at 3840x2160 produce 98.6 FPS, meaning the drop from 1440p to 4K is only 14.0%, showing that the RX 6600 XT’s rendering pipeline is the primary constraint once pixel count increases.
The Medium preset tells a similar story but with a steeper initial descent. The 1080p result of 80.4 FPS falls to 70.3 FPS at 1440p, a 12.6% reduction, then to 61.6 FPS at 4K, an additional 12.4% loss. High settings amplify this trend: 76.4 FPS at 1080p drops to 64.4 FPS at 1440p (15.7% lower), and then to 56.7 FPS at 4K (11.9% lower than 1440p). The Ultra preset, which demands the most from the GPU, shows the tightest scaling curve: 64.3 FPS at 1080p, 56.8 FPS at 1440p (11.7% drop), and 46.2 FPS at 4K (18.6% drop from 1440p).
The limiting component is clearly the GPU, not the CPU, because the percentile data supports this interpretation. The RX 6600 XT sits at the 71st percentile among all GPUs, while the Ryzen 5 2600 ranks at the 77th percentile among CPUs, meaning the processor is relatively stronger in the broader database context. However, the benchmark results from the CPU side—specifically a Cinebench R23 multi-core score of 11186 and a single-core score of 1579—suggest that at 1080p Low, where frame rates exceed 130 FPS, the CPU’s 6 cores and 12 threads at a 3.90 GHz boost clock are adequate but not headroom-rich. The gap between Low and Medium at 1080p (131.4 vs 80.4 FPS, a 38.8% difference) is far larger than the gap between Medium and High (80.4 vs 76.4 FPS, a 5.0% difference), which indicates that the GPU’s shading units and texture units are the bottleneck once quality settings rise above the minimum.
How This Combo Ranks
At rank 1257 out of 1744 combinations, this pairing sits in the 72nd percentile of tested configs for Overpower, meaning roughly 28% of all CPU-GPU pairings in the database deliver worse performance. The rank reflects the balanced but aging nature of both components: the Ryzen 5 2600, released in 2018, and the RX 6600 XT, released in 2021, are separated by three years of architectural advancement. The GPU’s nearest rival data shows it trading blows with the NVIDIA GeForce GTX 980 Ti (0.1% deltaPct, essentially identical average scores) and the AMD Radeon R9 M395X (0.4% ahead), while sitting 0.9% behind the NVIDIA GeForce RTX 3070 in average benchmark score—a surprisingly small gap given the generational difference.
The CPU’s nearest rivals paint a similar picture of mid-pack positioning. The Ryzen 5 2600’s average benchmark score of 19616 is within 0.7% of the Intel Core i7-10700F (19485, deltaPct 0.7) and within 0.6% of the AMD Ryzen 5 7530U (19508, deltaPct 0.6). It trails the Intel Core i5-1345U (19691, deltaPct -0.4) and the Intel Core i5-11600KF (19740, deltaPct -0.6) by less than a single percentage point. This means the combo’s low rank is less about either component being a weak link and more about the fact that both are older designs that, while still competitive in synthetic benchmarks, lack the modern features (like PCIe Gen 4 on the CPU side, which the GPU supports via its PCIe 4.0 x8 interface) that newer platforms leverage in game workloads.
FAQ
Q: What is the best resolution for this combo in Overpower?
A: 1920x1080 is the strongest resolution, with the Low preset achieving 131.4 FPS and even Ultra hitting 64.3 FPS, both above the 60 FPS threshold. At 2560x1440, only Low (114.7 FPS) and Medium (70.3 FPS) remain comfortably playable, while 3840x2160 requires Low settings (98.6 FPS) for smooth performance.
Q: How much performance is lost going from 1080p to 4K at the same settings?
A: The loss varies by preset: Low drops from 131.4 to 98.6 FPS (25.0% reduction), Medium from 80.4 to 61.6 FPS (23.4% reduction), High from 76.4 to 56.7 FPS (25.8% reduction), and Ultra from 64.3 to 46.2 FPS (28.1% reduction). The consistent ~25% penalty across settings confirms the GPU is the scaling bottleneck.
Q: Is this CPU or GPU limited in Overpower?
A: The data points to GPU limitation. The RX 6600 XT’s 71st percentile rank versus the CPU’s 77th percentile, combined with the fact that frame rates scale nearly linearly with resolution (a GPU characteristic), indicates the Radeon card is the constraining factor. The Ryzen 5 2600’s 6 cores and 12 threads are sufficient to avoid CPU-bound behavior at the tested settings.
Q: How does the RX 6600 XT compare to its nearest GPU rivals?
A: In average benchmark scores, the RX 6600 XT (27985) is essentially tied with the GTX 980 Ti (27956, deltaPct 0.1) and the R9 M395X (27883, deltaPct 0.4), while trailing the RTX 3070 (28238, deltaPct -0.9) by less than 1%. This suggests the GPU delivers performance comparable to a previous-generation flagship and a mid-range current-generation card.
Q: Can this combo handle Ultra settings at any resolution?
A: Yes, but only at 1080p, where Ultra produces 64.3 FPS. At 1440p Ultra drops to 56.8 FPS, and at 4K Ultra falls to 46.2 FPS, both below the 60 FPS target. Users wanting Ultra quality should stay at 1080p.
Q: What is the frame rate difference between Low and Ultra at the same resolution?
A: At 1080p, Low (131.4 FPS) is 104.4% faster than Ultra (64.3 FPS). At 1440p, the gap is 101.9% (114.7 vs 56.8 FPS). At 4K, the gap narrows to 113.4% (98.6 vs 46.2 FPS). The consistent doubling of performance when dropping to Low settings indicates the GPU’s 2048 shading units are heavily taxed by the higher-quality presets.
Measured FPS Breakdown
At 1920x1080, the full range of settings is playable. Low delivers 131.4 FPS, which is ideal for high-refresh-rate monitors. Medium produces 80.4 FPS, a 38.8% reduction from Low, while High yields 76.4 FPS, only 5.0% below Medium. Ultra drops to 64.3 FPS, a 15.8% reduction from High, but remains above the 60 FPS threshold for smooth gameplay.
At 2560x1440, the performance envelope tightens. Low achieves 114.7 FPS, still excellent for 1440p gaming. Medium falls to 70.3 FPS, a 38.7% drop from Low, and High reaches 64.4 FPS, just 8.4% below Medium. Ultra produces 56.8 FPS, which is 11.8% below High and dips under the 60 FPS line, making it marginal for fast-paced action.
At 3840x2160, only the Low preset provides a comfortable experience at 98.6 FPS. Medium drops to 61.6 FPS, which is just above the 60 FPS threshold but leaves little headroom for frame-time spikes. High falls to 56.7 FPS, below the target, and Ultra bottoms out at 46.2 FPS, a 25.6% reduction from High. The 4K results show that this combo is not designed for maximum quality at the highest resolution, but Low settings are surprisingly viable.
GPU Role
The AMD Radeon RX 6600 XT, built on the RDNA 2.0 architecture with the Navi 23 chip, provides 8 GB of GDDR6 memory on a 128-bit bus, delivering 256.0 GB/s of bandwidth. This memory configuration is sufficient for Overpower’s demands, as evidenced by the relatively small frame rate penalties when moving from 1080p to 1440p (less than 16% at all settings). The GPU’s boost clock of 2589 MHz and game clock of 2359 MHz, combined with 2048 shading units and 64 ROPs, produce a pixel rate of 165.7 GPixel/s and a texture rate of 331.4 GTexel/s.
The FP32 performance of 10.60 TFLOPS places this GPU in a competitive position, but the measured results in Overpower show that the card’s 8 GB frame buffer is not the limiting factor—the compute units are. The 71st percentile ranking among all GPUs, with an average benchmark score of 27985, confirms that this is a mid-range card that trades blows with the GTX 980 Ti (deltaPct 0.1) and RTX 3070 (deltaPct -0.9). The GPU’s DirectX 12 Ultimate support (12_2) and Vulkan 1.4 API compatibility ensure it can handle modern rendering features, but the 4K Ultra result of 46.2 FPS shows that the 10.60 TFLOPS of compute power is insufficient for maximum settings at that resolution. The card’s 160 W TDP and PCIe 4.0 x8 interface are adequate for the workload, but the data suggests that the GPU is consistently the bottleneck across all tested settings.
CPU Role
The AMD Ryzen 5 2600, with 6 cores and 12 threads based on the Zen architecture, operates at a base clock of 3.40 GHz and a boost clock of 3.90 GHz. This 2018-era processor, built on the 12 nm process at GlobalFoundries, provides 16 MB of shared L3 cache and supports dual-channel DDR4 memory with 46.9 GB/s of bandwidth. The CPU’s benchmark results—Cinebench R23 multi-core score of 11186 and single-core score of 1579, plus a Passmark multi-thread score of 13160—indicate that it is a capable mid-range processor, ranking at the 77th percentile among all CPUs.
In Overpower, the CPU’s role is secondary to the GPU. The evidence lies in the scaling pattern: at 1080p Low, the combo hits 131.4 FPS, which is high enough to stress the CPU’s single-thread performance (Cinebench R23 single-core 1579). Yet the fact that dropping to Medium at 1080p reduces frame rates to 80.4 FPS—a 38.8% penalty—while the CPU workload remains similar, proves that the GPU’s shading units are the constraint. The Ryzen 5 2600’s nearest rivals (i5-1345U, i5-11600KF, i7-10700F, Ryzen 5 7530U) all have average scores within 0.7% of the 2600, meaning the CPU is not a weak link relative to its peers. However, the PCIe Gen 3 interface (16 lanes) on the CPU side does limit the GPU’s PCIe 4.0 x8 connection to Gen 3 speeds, which could marginally impact performance in bandwidth-sensitive scenarios, though the measured data does not show a clear penalty.
Settings Recommendations
For users targeting 60 FPS as a baseline, the data suggests prioritizing 1080p over higher resolutions. At 1920x1080, Ultra achieves 64.3 FPS, making it the best visual quality preset that remains playable. If frame rate is paramount, Low at 1080p delivers 131.4 FPS, which is 104.4% faster than Ultra and ideal for competitive play. The Medium preset at 1080p (80.4 FPS) offers a balanced compromise, providing a 25.0% improvement over Ultra while retaining most visual fidelity.
At 2560x1440, the best experience is High settings at 64.4 FPS, which is just above the 60 FPS target and represents the highest quality preset that maintains smoothness. Medium at 1440p (70.3 FPS) is safer for frame-time consistency, while Low (114.7 FPS) is the only preset that fully utilizes a high-refresh-rate 1440p monitor. Ultra at 1440p (56.8 FPS) should be avoided unless the user accepts sub-60 FPS performance.
At 3840x2160, the recommendation is unambiguous: use Low settings, which produce 98.6 FPS. Medium at 4K (61.6 FPS) is borderline, but the 37.5% frame rate advantage of Low over Medium makes the lower preset the clear choice for 4K gaming. High (56.7 FPS) and Ultra (46.2 FPS) at 4K are not recommended, as they fall below the 60 FPS threshold and the visual gains are unlikely to justify the performance loss. The overall best experience for this combo is 1080p Ultra at 64.3 FPS, which balances visual quality with smooth gameplay, or 1440p High at 64.4 FPS for users prioritizing resolution over settings.
Hardware Specifications
AMD Ryzen 5 2600
AMD Radeon RX 6600 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 6600 XT in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 98.6 |
| 3840x2160 | Medium | 61.6 |
| 3840x2160 | High | 56.7 |
| 3840x2160 | Ultra | 46.2 |
| 2560x1440 | Low | 114.7 |
| 2560x1440 | Medium | 70.3 |
| 2560x1440 | High | 64.4 |
| 2560x1440 | Ultra | 56.8 |
| 1920x1080 | Low | 131.4 |
| 1920x1080 | Medium | 80.4 |
| 1920x1080 | High | 76.4 |
| 1920x1080 | Ultra | 64.3 |
Overpower with Ryzen 5 2600 + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RX 6600 XT + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RX 6600 XT
Explore FPS benchmarks for other games using this same hardware combination.