Overpower

The AMD Ryzen 5 2600 and NVIDIA GeForce RTX 2060 combination delivers a playable but uneven experience in Overpower, with performance that scales predictably across resolutions and settings. The data shows a system that is firmly GPU-bound at higher resolutions, while the CPU’s older architecture becomes a more noticeable factor at 1080p. This pairing ranks in the bottom fifth of tested configurations, indicating that while it can run the game, it does not do so at the head of the pack.

Resolution Scaling

The measured frames per second reveal a steep drop as resolution increases, a classic sign of GPU limitation. At 1080p with Low settings, the combo produces 119.5 FPS. Moving to 1440p drops that to 102.6 FPS, and at 4K it falls further to 90.1 FPS. This 29.4 FPS difference between 1080p and 4K at Low settings shows that the RTX 2060 is the primary bottleneck, as the pixel count increase directly impacts the render workload.

The scaling pattern changes dramatically when settings are raised. At High settings, the frame rate goes from 70.7 FPS at 1080p to 62.5 FPS at 1440p, and then to 52.8 FPS at 4K. The 17.9 FPS gap between 1080p and 4K at High is smaller than the gap at Low, which suggests that the game’s visual effects are adding a fixed cost that does not scale linearly with resolution. The Ultra preset tells a similar story: 58.3 FPS at 1080p, 50.6 FPS at 1440p, and 45.4 FPS at 4K. The 12.9 FPS drop from 1080p to 4K at Ultra is the smallest relative reduction, indicating that the GPU is already saturated by the settings before resolution becomes the limiting factor.

A notable anomaly appears at Medium settings. The frame rates are 72.6 FPS at 1080p, 66.9 FPS at 1440p, and 53.5 FPS at 4K. The 4K Medium result is nearly identical to the 4K High result (53.5 vs. 52.8 FPS), which implies that Medium and High presets impose a similar load on the GPU at this resolution. This suggests that the transition from Medium to High adds little extra cost at 4K, likely because the GPU is already working near its limit. At 1080p, however, the difference between Medium and High is only 1.9 FPS, confirming that the graphics card is not the sole constraint at lower resolutions.

CPU Role

The Ryzen 5 2600 is a 6-core, 12-thread processor from AMD’s 2000 series, built on the Zen architecture with a 12 nm process. Its base clock is 3.40 GHz and boost clock is 3.90 GHz, which are modest figures by modern standards. The CPU’s benchmark scores place it in the 77th percentile of all processors, with an average benchmark score of 19616. Its nearest rival, the Intel Core i5-1345U, scores 19691, a delta of -0.4%, meaning the Ryzen 5 2600 is effectively tied with that mobile chip. Against the AMD Ryzen 5 7530U, the 2600 is 0.6% faster, and it is 0.7% faster than the Intel Core i7-10700F.

In Overpower, the CPU’s role is most apparent at 1080p with Low settings, where the system achieves 119.5 FPS. This is the highest frame rate in the entire dataset, but it is not a sign of CPU strength. Rather, it reflects the fact that at Low settings, the GPU has less work to do, and the CPU’s 12 threads are sufficient to feed it. The single-thread score of 2239 in Passmark suggests that the processor can handle the game’s primary logic thread, but the older Zen architecture may struggle with more complex scenes. The Cinebench R23 multi-core score of 11186 indicates solid multi-threaded capability, which helps in a game that likely uses multiple threads for physics and AI.

The data does not show a clear CPU bottleneck, as the frame rates continue to increase when moving from 1440p to 1080p at all settings. If the CPU were the limiting factor, the 1080p results would plateau. Instead, the 119.5 FPS at 1080p Low versus 102.6 FPS at 1440p Low shows that the GPU is still the main constraint even at lower resolutions. The CPU’s 46.9 GB/s memory bandwidth and dual-channel DDR4 support are adequate, but they are not exceptional. The processor’s 16 MB shared L3 cache is moderate, and its PCIe Gen 3 lanes are older but sufficient for this GPU.

GPU Role

The RTX 2060 is built on NVIDIA’s Turing architecture with a TU106 chip, fabricated on a 12 nm process. It has 1920 shading units, 120 texture mapping units, and 48 raster output units. The GPU’s base clock is 1365 MHz with a boost clock of 1680 MHz, and it is equipped with 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. The card’s 6.451 TFLOPS of FP32 performance and 30 RT cores are notable, though the game’s results do not indicate heavy use of ray tracing.

The GPU’s benchmark scores place it in the 58th percentile of all GPUs, with an average score of 16074. Its nearest rival, the AMD Radeon RX 7600S, scores 15996, a delta of 0.5%, meaning the RTX 2060 is 0.5% faster. Against the AMD Radeon Pro 5600M and Pro 5700, both scoring 16351, the RTX 2060 is 1.7% slower. The data shows that the GPU is the dominant factor in Overpower’s performance, particularly at 4K. The 52.8 FPS at 4K High and 45.4 FPS at 4K Ultra are both below the 60 FPS threshold, indicating that the GPU’s 6 GB VRAM and memory bandwidth are stretched at this resolution.

The 4K Low result of 90.1 FPS is the only 4K figure above 60 FPS, which demonstrates that the GPU can handle the resolution when visual quality is minimized. The 14 Gbps effective memory speed and 192-bit bus are sufficient for 1080p and 1440p, but the 4K data suggests the card is operating near its memory capacity. The GPU’s 58th percentile ranking confirms that it is a mid-range part, and the measured results align with that positioning. The difference between 1440p and 1080p at Medium settings is 6.3 FPS (66.9 vs. 72.6), which is smaller than the 12.5 FPS difference at Low (102.6 vs. 119.5), indicating that the GPU’s compute units are the limiting factor at higher settings.

How This Combo Ranks

The combination of the Ryzen 5 2600 and RTX 2060 ranks 1415 out of 1744 tested combos in Overpower, placing it in the bottom 19% of configurations. This low ranking is surprising given the individual component percentiles (77th for CPU, 58th for GPU), but it reflects the age of both parts. The CPU’s 77th percentile is based on synthetic benchmarks, not gaming performance, and the GPU’s 58th percentile is similarly a general compute score. In a modern action game like Overpower, the combination’s actual gaming performance lags behind newer hardware.

The ranking suggests that many other CPU-GPU pairings deliver higher average frame rates. The CPU’s nearest rivals, such as the Intel Core i5-11600KF (which is 0.6% faster in average score) and the Intel Core i7-10700F (0.7% faster), would likely provide better gaming performance due to newer architectures. The GPU’s rivals, including the AMD Radeon RX 7600S (0.5% slower) and AMD Radeon Pro W5500 (1.8% slower), are closer in performance, but the RTX 2060’s age means it falls behind more modern mid-range cards.

The data indicates that this combo is not well-suited for high-refresh-rate gaming at 1080p, as the 119.5 FPS at Low settings is the only result above 100 FPS. At High settings, the 70.7 FPS at 1080p is acceptable but not exceptional, and the 4K results are all below 60 FPS except for Low. The rank of 1415 out of 1744 means that 329 other combos perform worse, but the majority of tested systems deliver better results. This is a budget-oriented pairing that will require settings adjustments to maintain playable frame rates.

Settings Recommendations

Based on the measured rows, the optimal experience depends on the target resolution. At 1080p, the High preset (70.7 FPS) offers a good balance of visual quality and performance, staying above the 60 FPS threshold. The Medium preset (72.6 FPS) is nearly identical in performance and may be preferable if visual fidelity is less important. The Ultra preset (58.3 FPS) dips below 60 FPS, so it is not recommended for smooth gameplay unless the user accepts a lower frame rate.

At 1440p, the High preset (62.5 FPS) is the best choice, as it maintains a playable frame rate while providing good detail. The Medium preset (66.9 FPS) is also viable, but the Low preset (102.6 FPS) is unnecessary unless the user prioritizes frame rate over visuals. The Ultra preset (50.6 FPS) is too demanding for this resolution, as it falls below 60 FPS.

At 4K, the Low preset (90.1 FPS) is the only setting that provides a smooth experience. The Medium preset (53.5 FPS) and High preset (52.8 FPS) are nearly identical and both below 60 FPS, making them unsuitable for fast-paced action. The Ultra preset (45.4 FPS) is the worst option. Users with a 4K display should either accept Low settings or consider lowering the resolution to 1440p for a better experience.

In summary, the data suggests that 1080p High or 1440p High are the sweet spots for this combo, delivering frame rates above 60 FPS without sacrificing too much visual quality. The 4K resolution is only playable at Low settings, which undermines the purpose of high-resolution gaming. For the best overall experience, 1080p with High settings is the recommended configuration.