Overpower

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 3070 presents a classic generational mix in the action title Overpower. The data shows a system where the GPU dominates the performance curve, though the aging CPU begins to assert its influence at lower resolutions. This analysis breaks down the measured frame rates, the GPU's role, and how this specific combination stacks up against thousands of other tested configurations.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a system that becomes progressively more GPU-bound as resolution increases. At 1080p with Low settings, the combo achieves 148 FPS. Moving to 1440p Low drops this to 142 FPS, a modest 4% reduction. However, the jump to 4K Low yields 132 FPS, which is an 11% drop from the 1080p figure. This relatively gentle slope at the Low preset suggests that even at 4K, the RTX 3070 has ample headroom, and the CPU is still contributing meaningfully to the final frame count.

The scaling behavior changes dramatically when we examine the High preset. At 1080p High, the system produces 101 FPS. At 1440p High, it falls to 90 FPS (an 11% decrease), and at 4K High, it lands at 76 FPS (a 25% decrease from 1080p). This steeper curve at higher settings indicates that the graphics card is becoming the primary limiting factor, as the increased shading and texture work at higher resolutions consumes the GPU's available compute resources at a faster rate than the CPU can feed frames.

The most telling data point for understanding the bottleneck is the Ultra preset. Here, 1080p yields 84 FPS, 1440p yields 75 FPS, and 4K yields 63 FPS. The 4K Ultra result represents a 25% reduction from 1080p Ultra. Critically, the gap between 1080p and 1440p is only 9 FPS, while from 1440p to 4K it is 12 FPS. This nonlinearity suggests that at 1080p Ultra, the Ryzen 5 2600's six cores and twelve threads are struggling to keep up with the RTX 3070's output, capping performance. As resolution climbs, the GPU workload grows, and the CPU bottleneck recedes, allowing the GPU to stretch its legs and show a more typical scaling pattern.

The Medium preset offers the clearest view of this dynamic. At 1080p Medium, the average is 109 FPS. The minimum frame rate recorded is 92 FPS, and the maximum is 125 FPS. At 1440p Medium, the average drops to 97 FPS, with a minimum of 82 FPS and a maximum of 111 FPS. The 4K Medium result is 82 FPS average, with a minimum of 70 FPS and a maximum of 95 FPS. The spread between minimum and maximum FPS is consistently around 25-30 FPS across these resolutions, indicating that frame pacing is relatively stable, but the overall ceiling is being dictated by the CPU at lower resolutions and the GPU at higher ones.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with a GA104 chip fabricated on an 8 nm process. It houses 5,888 shading units, 184 texture mapping units, and 96 raster output units. The card operates with a base clock of 1500 MHz and a boost clock of 1725 MHz. This configuration delivers a pixel rate of 165.6 GPixel/s and a texture rate of 317.4 GTexel/s, with FP32 performance rated at 20.31 TFLOPS.

Memory is a critical component here. The RTX 3070 carries 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. The memory clock runs at 1750 MHz, translating to 14 Gbps effective. In Overpower, this memory configuration proves sufficient even at 4K Ultra, where the combo still manages 63 FPS. The 8 GB capacity does not appear to be a limiting factor in the measured data, as the frame rates scale logically with resolution and settings without any anomalous collapses that would indicate VRAM swapping.

The GPU's benchmark scores reinforce its position. In 3DMark Steel Nomad DX12, it scores 3162. In Geekbench OpenCL, it posts 112,821, and in Geekbench Vulkan, it achieves 21,022. The Passmark G3D score is 22,214, while GPU compute is 11,195. The GPU's percentile ranking versus all GPUs is 61, meaning it outperforms 61% of all graphics cards in the database. Its average benchmark score is 17,208. Looking at its nearest rivals, the AMD Radeon RX 7600 XT scores 17,083 (0.7% lower), and the NVIDIA GeForce GTX 690 scores 17,037 (1% lower). The NVIDIA Tesla K40c is slightly ahead with 17,468 (1.5% higher). This data places the RTX 3070 as a solid mid-to-high-tier performer, though its 61st percentile shows it is not at the top of the stack.

The GPU's role in this combo is clearly the dominant force. At 4K Low, the system produces 132 FPS, which is more than double the 63 FPS at 4K Ultra. This 69 FPS swing is entirely attributable to the GPU's workload. The RTX 3070's 20.31 TFLOPS of FP32 compute and 448 GB/s of bandwidth are what allow the system to push past 100 FPS at 1440p Medium (97 FPS) and remain playable at 4K Medium (82 FPS).

How This Combo Ranks

Within the database of tested combinations for Overpower, this specific pairing of the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 3070 holds the rank of 1637 out of 3713 total combos. This places it in the 56th percentile of all tested systems for this game. This is a respectable position, indicating that the combo outperforms the majority of configurations tested, but it is far from the top tier.

The rank reflects the balance between the two components. The CPU, while older, still holds a 75th percentile ranking versus all CPUs. Its average benchmark score is 21,484, and its closest rivals are the Intel Core Ultra 5 228V with a score of 21,440 (0.2% lower), the Intel Core i9-11900H at 21,367 (0.5% lower), and the AMD EPYC 9454 at 21,223 (1.2% lower). The Intel Xeon D-1746TER is slightly ahead at 21,635 (0.7% higher). This CPU performance is sufficient to avoid catastrophic bottlenecks, but it does hold the system back from the higher ranks achieved by more modern processors.

The GPU's 61st percentile ranking is lower than the CPU's 75th percentile, which is unusual. This suggests that while the GPU is the primary driver of frame rates, its relative standing among all GPUs is weaker than the CPU's standing among all CPUs. This combination creates a system that is solidly mid-pack in the rankings. Out of 3,713 combos, being at 1,637 means there are over 2,000 systems that perform worse, but also over 1,600 that perform better. The data indicates that the Ryzen 5 2600 is likely the component preventing this combo from breaking into the top quartile of rankings, as the GPU is capable of higher performance when paired with a stronger CPU.

Measured FPS Breakdown

The measured FPS data covers three resolutions (1920x1080, 2560x1440, 3840x2160) and four settings presets (Low, Medium, High, Ultra). The Medium preset is the only one that includes minimum and maximum frame rate data, providing a fuller picture of performance consistency.

At 1920x1080, the average frame rates are:

• Low: 148 FPS
• Medium: 109 FPS (min 92, max 125)
• High: 101 FPS
• Ultra: 84 FPS

The progression from Low to Ultra shows a 64 FPS drop, which is a 43% reduction in performance. The gap between Medium and High is only 8 FPS, suggesting that the High preset's additional effects are not particularly taxing on this system at 1080p.

At 2560x1440, the average frame rates are:

• Low: 142 FPS
• Medium: 97 FPS (min 82, max 111)
• High: 90 FPS
• Ultra: 75 FPS

The 1440p results show a 67 FPS drop from Low to Ultra, a 47% reduction. The Medium to High gap remains small at 7 FPS. The minimum FPS at 1440p Medium is 82, which is still comfortably above 60 FPS, indicating smooth gameplay.

At 3840x2160, the average frame rates are:

• Low: 132 FPS
• Medium: 82 FPS (min 70, max 95)
• High: 76 FPS
• Ultra: 63 FPS

The 4K results show a 69 FPS drop from Low to Ultra, a 52% reduction. This is the largest percentage drop across all resolutions, confirming that the GPU is the limiting factor at 4K. The minimum FPS at 4K Medium is 70, which is still above the 60 FPS threshold for smooth play. The Ultra preset at 63 FPS average is playable but leaves little headroom for demanding scenes.

Settings Recommendations

Based on the measured data, the optimal settings for this combo depend on the target resolution and desired frame rate.

For 1080p displays, the High preset at 101 FPS is an excellent choice. It provides a significant visual upgrade over Medium (109 FPS) for only an 8 FPS loss. The Ultra preset at 84 FPS is also viable, but the 17 FPS drop from High may not justify the marginal visual gains. For competitive play, the Low preset at 148 FPS offers the maximum frame rate, but the Medium preset at 109 FPS with a 92 FPS minimum is a better balance of performance and visual quality.

At 1440p, the Medium preset at 97 FPS is the standout recommendation. It maintains a minimum of 82 FPS, ensuring smooth performance. The High preset at 90 FPS is also acceptable, but the Medium preset's higher average and minimum frame rates make it the safer choice. The Ultra preset at 75 FPS is playable, but the risk of dropping below 60 FPS in intense scenes is real. The Low preset at 142 FPS is for players who prioritize frame rate above all else.

For 4K, the Medium preset at 82 FPS is the clear winner. It delivers a minimum of 70 FPS, which is comfortably above the 60 FPS target. The High preset at 76 FPS is slightly lower, and the Ultra preset at 63 FPS is borderline. The Low preset at 132 FPS is an option for those who want high refresh rates at 4K, but it sacrifices most visual fidelity. The data suggests that Medium settings at 4K provide the best combination of visual quality and smooth performance for this hardware combo.

FAQ

Q: Can this combo achieve 60 FPS at 4K Ultra in Overpower?

A: Yes, the measured average at 3840x2160 Ultra is 63 FPS. This is above the 60 FPS threshold, but the margin is thin, and performance may dip in graphically intense moments.

Q: What is the highest average FPS this combo can produce?

A: The highest measured average is 148 FPS at 1920x1080 with Low settings. This represents the ceiling for this configuration.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: The data suggests the CPU is the limiting factor at 1080p. The frame rate scaling from 1080p to 1440p is minimal (e.g., 148 to 142 FPS at Low), indicating the GPU is not being fully utilized at the lower resolution.

Q: How does this combo rank against all tested combos in Overpower?

A: It ranks 1637 out of 3713 combinations, placing it in the 56th percentile. It outperforms the majority of tested systems but is not in the top tier.

Q: What is the minimum FPS recorded for this combo?

A: The lowest minimum FPS recorded is 70 at 3840x2160 with Medium settings. This is the only resolution where the minimum FPS dips to 70; at 1440p Medium it is 82, and at 1080p Medium it is 92.

Q: How does the RTX 3070 compare to its nearest GPU rivals?

A: The RTX 3070 has an average benchmark score of 17,208. The AMD Radeon RX 7600 XT scores 17,083, which is 0.7% lower. The NVIDIA GeForce GTX 690 scores 17,037, 1% lower. The NVIDIA Tesla K40c scores 17,468, which is 1.5% higher.