Outriders

Outriders

AVERAGE FPS
197
excellent

This combination delivers exceptional performance with an average of 197 FPS, perfect for high refresh rate gaming and competitive play.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 65 90 120 163
1440p QHD 123 168 219 282
1080p Full HD 191 250 310 381

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Ultra 65
3840x2160 High 90
3840x2160 Medium 120
3840x2160 Low 163
2560x1440 Ultra 123
2560x1440 High 168
2560x1440 Medium 219
2560x1440 Low 282
1920x1080 Ultra 191
1920x1080 High 250
1920x1080 Medium 310
1920x1080 Low 381

Outriders with Intel Core Ultra 5 135H + NVIDIA GeForce RTX 5050, In-Depth Analysis

The Intel Core Ultra 5 135H paired with the NVIDIA GeForce RTX 5050 presents a compelling mid-range mobile combination for Outriders. The measured data reveals a system where the GPU’s 8 GB VRAM and 128-bit memory interface become the decisive factors at higher resolutions, while the CPU’s 14 cores ensure headroom at lower settings. This analysis breaks down the benchmark results, placing the combo’s performance in context against its closest rivals and offering practical settings guidance based solely on the measured frames.

Resolution Scaling

The frame rate progression from 1080p to 4K clearly illustrates how Outriders scales with pixel count, and more importantly, where this specific hardware configuration hits its ceiling. At the High preset, the average FPS drops from 98 at 1920x1080 to 62 at 2560x1440, a reduction of approximately 37%. Moving from 1440p to 3840x2160, the average falls further to 32 FPS, a 48% decrease. This steepening curve is a classic sign of the GPU becoming the primary bottleneck as resolution increases.

Examining the Low preset tells a more nuanced story. At 1080p Low, the system achieves a robust 180 FPS average, but this drops to 114 FPS at 1440p and then plummets to 59 FPS at 4K. The relative drop from 1440p to 4K is substantial, indicating that even at the lowest settings, the 4K resolution overwhelms the RTX 5050’s capabilities. The data suggests that while the CPU can push very high frame rates at lower resolutions — evidenced by the 180 FPS figure — the GPU’s rendering throughput, constrained by its 8 GB memory and 320 GB/s bandwidth, cannot sustain that performance when pixel count quadruples.

The Medium preset offers another perspective. At 1080p, the average is 131 FPS, which falls to 83 FPS at 1440p and 43 FPS at 4K. The scaling here is more linear than at High, suggesting that the Medium settings reduce some GPU load, allowing the frame rate to drop more predictably with resolution. However, the 4K result of 43 FPS is still far from smooth, reinforcing that 4K is not a viable target for this combo. The frame time data for Medium, with min FPS of 111 at 1080p, 70 at 1440p, and 37 at 4K, shows that the lower percentiles scale similarly, indicating consistent performance without sudden stutters, but the overall trend points to 1440p as the practical upper bound for this hardware in Outriders.

GPU Role

The RTX 5050’s role in these results is central, and its specifications explain much of the observed behavior. With 8 GB of GDDR6 memory on a 128-bit bus, the GPU has a bandwidth of 320.0 GB/s. This memory configuration is a likely culprit for the significant drop at 4K, where texture data and framebuffer requirements exceed what the memory subsystem can efficiently handle. The 4K Ultra result of 23 FPS average, compared to 32 FPS at High, suggests that the additional memory pressure from Ultra settings further cripples performance.

The GPU’s clock speeds, with a base of 2317 MHz and boost of 2572 MHz, are relatively high, but they do not compensate for the memory bandwidth limitation. The 2560 shading units and 80 TMUs provide the raw compute, yet the 32 ROPs may also limit fill-rate dependent scenes at high resolutions. The benchmark results show that the GPU’s PassMark G3D score of 17326 places it in the 66th percentile of all GPUs, which is mid-range. Its nearest rivals include the AMD Radeon RX Vega M GL (avgScore 21153, deltaPct -0.6) and the NVIDIA RTX A4000 Mobile (avgScore 21379, deltaPct -1.6), indicating it performs slightly below those in synthetic tests.

In Outriders, this translates to a GPU that can deliver high frame rates at 1080p but progressively struggles as resolution climbs. The difference between Low and High at 1080p — 180 vs 98 FPS — shows that the GPU has headroom when memory pressure is low. However, at 4K, even Low settings (59 FPS) cannot reach a smooth 60 FPS average, highlighting that the 8 GB VRAM is a hard limit for this title at that resolution. The data implies that players should prioritize resolution over settings, as dropping from High to Low at 1440p yields a significant gain (62 to 114 FPS) while maintaining a playable experience.

How This Combo Ranks

In the broader database of tested combinations, this CPU-GPU pair ranks 2314 out of 2913 combos for Outriders. This places it in the lower-mid tier, meaning that roughly 79% of tested systems deliver higher average FPS in this game. This ranking is somewhat surprising given the individual component scores, suggesting that the combination of this specific CPU and GPU does not synergize as well as other pairings.

The CPU alone, the Intel Core Ultra 5 135H, has an average benchmark score of 29093, which places it at the 81st percentile of all CPUs. Its nearest rivals include the AMD Ryzen 7 5800X (avgScore 29123, deltaPct -0.1) and the Intel Core i5-13500HX (avgScore 29270, deltaPct -0.6), showing it is competitive with those desktop and mobile parts. However, the GPU’s 66th percentile ranking (avgBenchmarkScore 21035) drags the combined performance down. The RTX 5050’s nearest rival, the AMD Radeon RX 5600 XT (avgScore 20713, deltaPct 1.6), is a desktop card, and the RTX 5050 trails the RTX A4000 Mobile by 1.6%.

The rank of 2314 suggests that while each component is respectable on its own, the pairing does not produce top-tier results in Outriders. This could be due to the GPU’s memory limitations hampering the CPU’s ability to feed frames at higher resolutions, or the CPU’s performance not being fully utilized when the GPU is the bottleneck. The data indicates that this combo is best suited for 1080p gaming, where it can leverage the CPU’s strength, rather than at higher resolutions where the GPU holds it back.

Settings Recommendations

Based on the measured FPS rows, the optimal balance between visual quality and performance for this combo is the High preset at 1440p. At 2560x1440 with High settings, the average FPS is 62, which provides a smooth experience for most players. This is a significant improvement over the Ultra preset at the same resolution, which only achieves 45 FPS average, a difference of 17 FPS. The jump from Medium to High at 1440p is only 21 FPS (83 to 62), suggesting that High offers better visuals without a catastrophic performance hit.

For players prioritizing high refresh rates, the Low preset at 1080p is the clear winner, delivering an average of 180 FPS. This is more than double the High preset’s 98 FPS at the same resolution, making it ideal for competitive play. The Medium preset at 1080p offers a middle ground at 131 FPS, but the Low preset’s performance advantage is substantial.

At 4K, no preset is truly playable. The best average is 59 FPS at Low, which is borderline, but the High preset drops to 32 FPS and Ultra falls to a slideshow-like 23 FPS. The data strongly suggests avoiding 4K with this hardware. The Medium preset at 4K provides 43 FPS with a minimum of 37 FPS, which could be tolerable in slower-paced sections, but it is not recommended for consistent action. In summary, the measured data points to 1440p High as the best overall experience, with 1080p Low as the high-refresh-rate alternative.

Measured FPS Breakdown

At 1920x1080, the benchmark results show a clear progression across settings. The Low preset averages 180 FPS, which is the highest recorded for this combo. The Medium preset averages 131 FPS, with a minimum of 111 FPS and a maximum of 151 FPS, indicating decent frame pacing. The High preset averages 98 FPS, and the Ultra preset averages 71 FPS. This represents a 109 FPS difference between Low and Ultra, showing that the GPU has substantial headroom at this resolution.

Moving to 2560x1440, the averages are 114 FPS at Low, 83 FPS at Medium (min 70, max 95), 62 FPS at High, and 45 FPS at Ultra. The drop from 1080p to 1440p at Low is 66 FPS (180 to 114), which is a 37% reduction. At High, the drop is 36 FPS (98 to 62), a 37% reduction as well, showing consistent scaling. The Medium preset’s minimum of 70 FPS suggests that even during intense scenes, the frame rate remains above 60 FPS.

At 3840x2160, the results are 59 FPS at Low, 43 FPS at Medium (min 37, max 50), 32 FPS at High, and 23 FPS at Ultra. The Medium preset’s minimum of 37 FPS indicates that the frame rate can dip below 40 FPS, which may cause noticeable stuttering. The data shows that 4K is only marginally playable at Low, and the performance degrades severely as settings increase. The 23 FPS at Ultra is the lowest recorded average across all resolutions and settings, highlighting the GPU’s absolute limit in this title.

FAQ

*Q: What is the highest average FPS achievable with this combo in Outriders?*

A: The highest average FPS recorded is 180, achieved at 1920x1080 resolution with the Low preset.

*Q: Can this system handle 4K gaming in Outriders?*

A: At 3840x2160, the best average FPS is 59 at Low settings, which is borderline. Higher settings produce averages of 43 FPS at Medium, 32 FPS at High, and 23 FPS at Ultra, indicating 4K is not recommended.

Q: How does the RTX 5050 compare to its nearest rival in synthetic benchmarks?

A: The RTX 5050 has an average benchmark score of 21035. Its closest rival, the AMD Radeon RX Vega M GL, scores 21153, which is a deltaPct of -0.6%, meaning the RTX 5050 is 0.6% slower.

Q: What is the best resolution-to-settings combination for a smooth experience?

A: The data suggests 2560x1440 with High settings, yielding an average of 62 FPS, offers the best balance. For higher frame rates, 1920x1080 at Low provides 180 FPS.

Q: Is the CPU or GPU more of a limiting factor at 1080p?

A: At 1080p Low, the 180 FPS average suggests the GPU is not fully saturated, implying the CPU has headroom. However, the GPU becomes the primary bottleneck as resolution increases.

Q: How does this combo rank overall compared to other tested systems?

A: This combo ranks 2314 out of 2913 tested combinations for Outriders, placing it in the lower-mid range of database results.

CPU Role

The Intel Core Ultra 5 135H plays a supporting role in these results, but its specifications are crucial for understanding the lower-resolution performance. With 14 cores and 18 threads, the CPU provides substantial parallel processing capability, which is reflected in its Cinebench R23 multi-core score of 11875.5. The base clock of 3.60 GHz and boost clock of 4.60 GHz offer solid single-thread performance, as seen in the Cinebench R23 single-core score of 1700. This CPU is a Meteor Lake part on a 7 nm process, with an 18 MB shared L3 cache.

In Outriders, the CPU’s role is most evident at 1080p Low, where the average FPS of 180 suggests the CPU is capable of feeding the GPU with enough frames to hit high refresh rates. The PassMark multi-thread score of 22422 and single-thread score of 3521 indicate balanced performance. The CPU’s nearest rival, the AMD Ryzen 7 5800X, has an average score of 29123 (deltaPct -0.1%), meaning the Ultra 5 135H is nearly identical in synthetic performance. Similarly, it trails the Intel Core i5-13500HX by only 0.6% (avgScore 29270).

However, as resolution increases, the CPU’s influence wanes. The 4K results are nearly identical across different settings, suggesting the GPU is the sole bottleneck. At 1440p, the CPU still provides enough headroom to allow the GPU to be the limiting factor, as evidenced by the scaling from Low to High. The data implies that this CPU is more than capable of handling Outriders, and any performance shortfalls at higher resolutions are attributable to the RTX 5050. For players using this combo, the CPU will not be a source of frame rate drops or stutters in this title, especially at the recommended 1440p High settings.

Hardware Specifications

Intel Core Ultra 5 135H

Cores / Threads 14 / 18
Base Clock 3600 MHz
Boost Clock 4600 MHz
TDP 28W
Socket Intel BGA 2049
View Full CPU Details →

NVIDIA GeForce RTX 5050

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2572 MHz MHz
TDP 130 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 135H + NVIDIA GeForce RTX 5050 in Outriders

Resolution Settings Avg FPS
3840x2160 Ultra 65.0
3840x2160 High 90.0
3840x2160 Medium 120.0
3840x2160 Low 163.0
2560x1440 Ultra 123.0
2560x1440 High 168.0
2560x1440 Medium 219.0
2560x1440 Low 282.0
1920x1080 Ultra 191.0
1920x1080 High 250.0
1920x1080 Medium 310.0
1920x1080 Low 381.0

Outriders with iUltra 5 135H + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RTX 5050 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with iUltra 5 135H + RTX 5050

Explore FPS benchmarks for other games using this same hardware combination.