Outriders

The AMD Ryzen 5 7600X paired with the Intel Arc B390 produces a highly unusual performance profile in Outriders. This combination ranks near the bottom of all tested configurations, and the measured frame rates confirm that the GPU is the overwhelming limiting factor. The data shows a system that can handle the game’s CPU demands effortlessly, but the integrated graphics solution simply cannot push enough pixels for a smooth experience at most settings. This analysis breaks down exactly what the benchmark results mean for gameplay, how the components interact, and which settings, if any, are viable.

FAQ

Q: What is the best average FPS this combo achieves in Outriders?

A: The highest measured average frame rate is 115 FPS, recorded at 1920x1080 resolution with Low settings. This is the only configuration in the measured data that approaches or exceeds standard 60 FPS targets, making it the sole viable option for smoother gameplay.

Q: How does this combo rank among all tested CPU and GPU pairings in Outriders?

A: This combination ranks 2582 out of 2913 tested combos, placing it in the bottom 11% of all configurations. This percentile ranking reflects the severe performance bottleneck created by the Intel Arc B390’s limited graphics capabilities relative to other tested GPUs.

Q: Is the Ryzen 5 7600X powerful enough for Outriders?

A: Yes, the CPU data suggests it is more than adequate. The Ryzen 5 7600X scores 15236 in Cinebench R23 multi-core and 1965 in single-core. Its nearest rival, the AMD Ryzen 7 5700X, has an average benchmark score only 0.2% higher, indicating the 7600X is a solid performer that is not the primary constraint in this pairing.

Q: What is the GPU’s benchmark score compared to its nearest rivals?

A: The Intel Arc B390 has an average benchmark score of 1482 in the 3DMark Steel Nomad DX12 test. Its closest rival, the NVIDIA GeForce GT 520MX, scores 1463, which is 1.3% lower. The GPU’s percentile rank among all GPUs is 9, meaning it outperforms only about 9% of the database.

Q: Can this combo run Outriders at 2560x1440 with playable frame rates?

A: Only at Low settings, where it averages 72 FPS. At Medium settings, the average drops to 53 FPS with a minimum of 45 FPS. High settings yield 40 FPS average, and Ultra falls to 29 FPS. For a 60 FPS target, 1440p is only feasible on Low.

Q: What is the impact of the GPU’s shared memory architecture on performance?

A: The Intel Arc B390 uses System Shared memory with a bandwidth that is "System Dependent." This means the GPU relies on the system’s main memory rather than dedicated VRAM, which contributes to its low performance ceiling in this game, as evidenced by the measured FPS results across all resolutions.

CPU Role

The AMD Ryzen 5 7600X is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael. It operates on the AMD Socket AM5 platform and features a base clock of 4.70 GHz with a boost clock of 5.30 GHz. This is a high-frequency desktop part with a 105 W TDP, built on a 5 nm process node by TSMC. The CPU’s cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and a shared 32 MB L3 cache. This configuration provides strong single-thread and multi-thread performance, which is directly reflected in its benchmark scores.

In synthetic tests, the 7600X achieves a Geekbench single-core score of 2603 and a multi-core score of 13858. Its Cinebench R23 results show 1965 for single-core and 15236 for multi-core. The Passmark single-thread score is 4135, and the multi-thread score is 28390. These numbers place the CPU at the 79th percentile among all CPUs in the database, indicating it is a competent processor for gaming workloads. Its average benchmark score is 27636, which is nearly identical to its nearest rivals: the AMD Ryzen 7 5700X and Intel Core i5-12600K both score 27578, with a delta of just 0.2%. This means the 7600X is essentially on par with those established mid-range parts.

For Outriders, the CPU’s role is to handle game logic, physics, and the many enemy AI entities typical of a looter shooter. The 12 threads provide ample parallelism for modern game engines. The high single-thread performance ensures that the main game thread, which often dictates frame pacing, is not a bottleneck. In this specific combo, the CPU is clearly not the limiting factor. The measured FPS across all resolutions and settings shows a consistent pattern where frame rates scale with resolution, which is a hallmark of a GPU-bound scenario. If the CPU were the constraint, we would see less variation between 1080p and 4K results. Instead, the average FPS drops dramatically as resolution increases, confirming that the Ryzen 5 7600X has headroom that the Intel Arc B390 cannot utilize.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600X and Intel Arc B390 ranks 2582 out of 2913 tested combos in Outriders. This places it in the bottom 11.3% of all configurations, a position that is heavily influenced by the GPU’s low performance percentile. The CPU’s 79th percentile ranking is negated by the GPU’s 9th percentile ranking, resulting in a system that underperforms most others in this game.

The data suggests that the Intel Arc B390, with its 3DMark Steel Nomad score of 1482, is comparable to legacy integrated or entry-level discrete GPUs. Its nearest rivals include the NVIDIA GeForce GT 520MX, which scores 1463 (1.3% lower), and the NVIDIA GeForce GT 710, which scores 1443 (2.7% lower). These are not modern gaming graphics solutions, and the benchmark results in Outriders reflect that reality. The combo rank of 2582 means that the vast majority of other CPU-GPU pairings in the database deliver better average frame rates in this title.

It is important to note that this rank is specific to Outriders. The game’s engine and optimization may favor certain hardware, but given the extreme performance gap between the CPU and GPU, the rank is predictable. In a game like Outriders, which is not notoriously demanding on CPU, the graphics processor is the primary determinant of playability. The 7600X is more than capable, but it is paired with a solution that delivers frame rates similar to what one might expect from an integrated graphics chip from a much older generation.

Measured FPS Breakdown

The measured FPS data provides a clear picture of what to expect from this combo at various settings and resolutions. At 1920x1080, the most common gaming resolution, the results are mixed. With Low settings, the combo averages 115 FPS, which is smooth and playable. This is the only setting at this resolution that provides a comfortable margin above 60 FPS. At Medium settings, the average drops to 83 FPS, with a minimum of 71 FPS and a maximum of 96 FPS. This is still playable, but the lower minimums indicate occasional stutters. High settings yield an average of 63 FPS, which is borderline for a 60 Hz display. Ultra settings bring the average down to 45 FPS, which is not ideal for fast-paced action.

Moving to 2560x1440, the performance degrades significantly. Low settings produce an average of 72 FPS, which is acceptable, but just barely above the 60 FPS threshold. Medium settings average 53 FPS, with a minimum of 45 FPS and a maximum of 61 FPS. This is playable but inconsistent. High settings average 40 FPS, and Ultra settings drop to 29 FPS. Neither of these latter options provides a smooth experience. At 3840x2160 (4K), the results are poor. Low settings average 38 FPS, Medium averages 28 FPS with a minimum of 23 and a maximum of 32, High averages 21 FPS, and Ultra averages 15 FPS. None of these are viable for serious gameplay.

The pattern is clear: resolution scaling has a massive impact, while settings adjustments have a moderate impact. From 1080p Low to 4K Low, the average FPS drops from 115 to 38, a reduction of 67%. From 1080p Low to 1080p Ultra, the average drops from 115 to 45, a reduction of 61%. This indicates that the GPU is heavily limited by pixel throughput and fill rate, which is consistent with its low ROPS count of 24 and pixel rate of 60.00 GPixel/s. The data shows that the only way to get a consistently playable experience is to use 1080p with Low or possibly Medium settings.

GPU Role

The Intel Arc B390 is an integrated graphics processor (IGP) based on the Xe3-LPG architecture, with the chip codenamed Panther Lake. It has a base clock of 300 MHz and a boost clock of 2500 MHz, and it is built on a 3 nm process by Intel. The GPU features 1536 shading units, 48 texture mapping units (TMUs), and 24 raster output units (ROPs). It has 12 ray tracing cores, though the impact of these in Outriders is likely minimal given the low overall performance. The GPU’s FP32 compute throughput is rated at 7.680 TFLOPS, and its texture rate is 120.0 GTexel/s.

Crucially, the memory configuration is "System Shared." This means the GPU does not have dedicated VRAM; instead, it uses a portion of the system’s main memory, with bandwidth that is "System Dependent." This is a major limitation for gaming, as memory bandwidth is often a critical factor in sustained frame rates. The GPU’s TDP is 80 W, and it uses no power connectors, reinforcing its integrated nature. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, which means it is feature-complete for modern APIs, but the hardware execution is too slow.

In benchmark terms, the Arc B390 scores 1482 in 3DMark Steel Nomad DX12, which places it at the 9th percentile of all GPUs. Its nearest rivals are all older, low-end parts: the GT 520MX, GeForce 800M, GT 625 OEM, and GT 710. These are not GPUs designed for modern gaming at high settings. The measured FPS in Outriders confirms this. The GPU’s low ROPS count and shared memory bandwidth limit its ability to render at higher resolutions. The data shows that even at 1080p, Ultra settings are not feasible, and at 4K, even Low settings struggle to maintain 30 FPS. The GPU is the definitive bottleneck in this pairing, and its performance dictates the overall experience.

Settings Recommendations

Based on the measured FPS data, the only configuration that provides a consistently smooth experience is 1920x1080 with Low settings, which averages 115 FPS. This is the recommended preset for any user hoping to play Outriders with this combo. The jump from Low to Medium at 1080p is significant, dropping the average from 115 to 83 FPS. While 83 FPS is still playable, the minimum of 71 FPS suggests that there may be dips during heavy action scenes. For a more stable experience, Low is the safer choice.

At 2560x1440, the only option that stays above 60 FPS is Low, with an average of 72 FPS. However, the margin is slim, and any demanding scene could push it below that threshold. Medium at 1440p averages 53 FPS, which is below the 60 FPS target and will feel less fluid. For 4K gaming, none of the settings are recommended. The highest average at 3840x2160 is 38 FPS on Low, which is not suitable for a fast-paced looter shooter. The data indicates that users should avoid 4K entirely with this combo if they value playability.

The practical advice is to stick to 1080p. If the user prioritizes visual fidelity over frame rate, Medium settings at 1080p offer a better balance than High, which only averages 63 FPS. Ultra settings are not recommended, as the 45 FPS average is too low for responsive gameplay. In summary, the best experience per the measured rows is 1920x1080 with Low settings, with 1920x1080 Medium as a secondary option if the user can tolerate occasional frame drops below 60 FPS. This combo is not suited for high-resolution or high-detail gaming, and the settings should be chosen accordingly to maintain playability.