Outriders

Outriders

AVERAGE FPS
103
good

This combination provides smooth gameplay with an average of 103 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 46 57 78
1440p QHD 60 83 115 155
1080p Full HD 96 131 178 205

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 78
3840x2160 Medium 57
3840x2160 High 46
3840x2160 Ultra 32
2560x1440 Low 155
2560x1440 Medium 115
2560x1440 High 83
2560x1440 Ultra 60
1920x1080 Low 205
1920x1080 Medium 178
1920x1080 High 131
1920x1080 Ultra 96

Outriders with AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 4060, In-Depth Analysis

The AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 4060 pairing in Outriders presents a clear case of GPU-bound scaling, but with a CPU that holds its own at lower settings. The measured frames show a predictable degradation as resolution climbs, yet the gap between settings presets reveals where the bottleneck shifts. For a looter shooter demanding sustained firefights, understanding this curve is critical for tuning.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 is punishing, but the slope varies dramatically by preset. At Low settings, the average FPS drops from 205 at 1080p to 154.9 at 1440p, then to 77.7 at 4K. That is a 62% reduction from 1080p to 4K, indicating the RTX 4060’s 8 GB frame buffer and 128-bit memory interface are being saturated at the highest resolution. The 272.0 GB/s bandwidth is a limiting factor here, as pixel throughput demands outpace what the card can feed.

At High settings, the curve is steeper in relative terms: 131.1 FPS at 1080p falls to 83.2 at 1440p, and then to 45.7 at 4K. The 4K figure is just above a playable threshold, but the 45% drop from 1440p to 4K shows the GPU is working near its limits. Ultra settings tell a harsher story: 96 FPS at 1080p, 60.2 at 1440p, and only 31.7 at 4K. That 4K result is below the 60 FPS target most players expect, and the data suggests the RTX 4060 is not suited for Ultra at that resolution in this title.

The key insight is that the CPU is not the primary constraint at 4K. The Ryzen 5 5600GT, with its 6 cores and 12 threads, maintains enough headroom to let the GPU become the bottleneck. At 1080p Low, however, the 205 FPS average suggests the CPU’s single-thread performance (a 3dmark_single_thread score of 913) is sufficient to feed the GPU without holding it back. The scaling from Low to Medium at 1080p (205 to 177.9) is modest, but the jump from Medium to High (177.9 to 131.1) is steep, indicating that the GPU’s shading units (3072) and texture units (96) are being taxed more heavily as effects increase.

FAQ

Q: Is the RTX 4060 capable of 4K gaming in Outriders?

A: At 4K Ultra, the average FPS is 31.7, which is not smooth. At 4K High, it reaches 45.7 FPS, and at 4K Low it hits 77.7 FPS. The 8 GB VRAM and 272.0 GB/s bandwidth are the constraints, so 4K is only viable at Low or Medium settings.

Q: What is the best resolution for a high refresh rate monitor?

A: At 1920x1080 with Low settings, the combo averages 205 FPS. At 1440p Low, it drops to 154.9 FPS. If targeting 144 Hz, 1440p Low is sufficient, while 1080p Medium (177.9 FPS) also clears that bar comfortably.

Q: How does the CPU affect performance at lower resolutions?

A: The Ryzen 5 5600GT’s 12 threads and 16 MB L3 cache are enough to avoid bottlenecking the GPU at 1080p. The 3dmark_max_threads score of 5554 shows strong multi-threaded capacity, though the 2-thread score of 1794 indicates single-core performance is adequate, not exceptional.

Q: Should I use the Ultra preset?

A: Only if you have a 1080p monitor and can tolerate 96 FPS. At 1440p, Ultra averages 60.2 FPS, which is borderline. At 4K, Ultra is not recommended at 31.7 FPS.

Q: Does the GPU’s clock speed matter for this game?

A: The RTX 4060 boosts to 2460 MHz, and the data shows that higher settings scale performance down consistently. The FP32 throughput of 15.11 TFLOPS is the theoretical peak, but real-world results are limited by memory bandwidth and bus width.

Q: How does this combo rank against other tested configurations?

A: It ranks 913 out of 1693 combos, placing it in the upper-middle tier. This is a solid pairing, but not a top-tier one for Outriders, given the GPU’s 66th percentile ranking among all GPUs.

GPU Role

The RTX 4060’s role in Outriders is defined by its 8 GB GDDR6 memory and 128-bit bus. The 272.0 GB/s bandwidth is modest for a modern card, and the measured results reflect this. At 4K High, the card produces 45.7 FPS, which is a 45% drop from the 1440p High result of 83.2 FPS. This scaling is typical of a card that is memory-limited, not compute-limited. The 3072 shading units and 48 ROPs are capable, but they cannot compensate for the narrow memory bus when pixel fill rates increase.

The base clock of 1830 MHz and boost of 2460 MHz are decent, and the card’s 15.11 TFLOPS FP32 performance is in line with its class. However, the PassMark G3D score of 19545 places it in the 66th percentile, and its nearest rival, the AMD Radeon RX 6600M, scores 23321, a delta of -0.6%. This indicates the RTX 4060 is competitive but not dominant. The 12-pin power connector and 115 W TDP suggest it is an efficient card, but efficiency does not translate to brute force at 4K.

The data shows that the GPU is the limiting factor at 1440p and above. At 1080p, the CPU can feed it up to 205 FPS on Low, but the GPU’s architecture struggles to maintain that pace as settings increase. The 8 GB VRAM is sufficient for 1080p High (131.1 FPS) but may cause stuttering if textures exceed capacity at 4K Ultra. The 17 Gbps effective memory clock is fast, yet the 128-bit interface halves the effective bandwidth compared to wider-bus cards.

How This Combo Ranks

The AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 4060 combination ranks 913 out of 1693 tested combos in Outriders. This places it in the 54th percentile, meaning about half of the tested systems perform better. The CPU’s percentile rank is 78, which is strong, but the GPU’s 66th percentile drags the overall score down. The combo’s rank is not a reflection of poor individual components, but rather a mismatch: the CPU is more capable than the GPU in relative terms.

The CPU’s nearest rival, the Intel Core i7-10700, has an average score of 20746, which is essentially identical (deltaPct 0). The Ryzen 5 5600GT’s 20740 average score is within 0.3% of the Ryzen 5 5600X, indicating that the CPU is not the weak link. The GPU, however, is slightly below the AMD Radeon RX 6600M (deltaPct -0.6%) and above the Intel Arc B580 (deltaPct 0.7%). This means the RTX 4060 is in a tightly packed mid-range group, and Outriders’ performance is typical of this tier.

For a looter shooter, the rank suggests you will not be at the top of the leaderboard for frame rates, but you will be in the upper half. The combo’s 913 rank is respectable, and the data indicates that the bottleneck is the GPU, not the CPU. If you were to pair this CPU with a more powerful GPU, the rank would likely improve, but as-is, it is a balanced mid-range setup.

Settings Recommendations

The measured data points to a clear sweet spot: 1440p Medium. The average FPS at 1440p Medium is 114.7, which is smooth and visually detailed. Dropping to 1440p Low yields 154.9 FPS, which is excellent for competitive play, but the visual fidelity loss may not be worth it for a narrative-driven looter shooter. At 1080p, Medium (177.9 FPS) offers a great balance if you prioritize frame rate over resolution, but 1440p Medium is the better overall experience.

For 4K, the only viable options are Low (77.7 FPS) or Medium (57.3 FPS). High (45.7 FPS) is playable but not ideal, and Ultra (31.7 FPS) should be avoided. The data suggests that the RTX 4060 is not a 4K card for this game, so 1440p is the optimal target. If you have a 144 Hz monitor, 1440p Low is the only setting that consistently exceeds 144 FPS, but Medium at 114.7 FPS is still smooth.

The Ultra preset is a trap. It only provides marginal visual improvements over High, but the performance cost is severe: a 45% drop from High to Ultra at 1080p (131.1 to 96 FPS), and a 44% drop at 1440p (83.2 to 60.2 FPS). For a game like Outriders, where enemy density and particle effects matter, Medium or High is the pragmatic choice. The 8 GB VRAM is a constraint at Ultra, so staying below that preset avoids potential memory pressure.

Measured FPS Breakdown

At 1920x1080, the full range of settings is playable. Low averages 205 FPS, Medium 177.9, High 131.1, and Ultra 96. The gaps between settings are substantial, with a 29% drop from Low to Medium, and another 26% drop from Medium to High. This indicates that the GPU’s pixel and texture processing are the main drivers of performance.

At 2560x1440, the numbers scale down proportionally. Low averages 154.9, Medium 114.7, High 83.2, and Ultra 60.2. The drop from Low to Medium is 26%, and from Medium to High is 27%. The Ultra setting just barely holds above 60 FPS, but the margin is thin. The 4K results are more punitive: Low averages 77.7, Medium 57.3, High 45.7, and Ultra 31.7. The 4K Low figure is the only one that clears 60 FPS, and it does so by a margin of 17.7 FPS.

The trend across all resolutions is consistent: Low to Medium is a manageable hit, Medium to High is steeper, and High to Ultra is brutal. At 1080p, the High to Ultra drop is 35.1 FPS, while at 4K it is 14 FPS. This suggests that the Ultra preset introduces effects that disproportionately tax the GPU’s 48 ROPs and 96 TMUs. The 118.1 GPixel/s pixel rate is the theoretical ceiling, and the data shows that Ultra approaches that limit at lower resolutions. For stable performance, stick to Medium or High depending on your resolution target.

Hardware Specifications

AMD Ryzen 5 5600GT

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2460 MHz MHz
TDP 115 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 4060 in Outriders

Resolution Settings Avg FPS
3840x2160 Low 77.7
3840x2160 Medium 57.3
3840x2160 High 45.7
3840x2160 Ultra 31.7
2560x1440 Low 154.9
2560x1440 Medium 114.7
2560x1440 High 83.2
2560x1440 Ultra 60.2
1920x1080 Low 205.0
1920x1080 Medium 177.9
1920x1080 High 131.1
1920x1080 Ultra 96.0

Outriders with Ryzen 5 5600GT + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RTX 4060 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with Ryzen 5 5600GT + RTX 4060

Explore FPS benchmarks for other games using this same hardware combination.