Outriders

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 4060 produces a performance curve in Outriders that is heavily dictated by resolution. The data shows a clear and predictable scaling pattern: at 1920x1080, the combination is rarely constrained, but moving to 3840x2160 exposes the GPU as the primary bottleneck. At 1080p with Low settings, the combo delivers an average of 195.8 FPS, which drops to 136 FPS at High and 96.9 FPS at Ultra. This spread of nearly 100 FPS between the lowest and highest presets indicates that the CPU is feeding frames efficiently, allowing the graphics card to be the sole limiting factor.

Stepping up to 2560x1440, the averages remain strong: 156 FPS on Low, 111.3 FPS on Medium, 86.2 FPS on High, and 63.1 FPS on Ultra. The transition from 1080p to 1440p costs roughly 30% performance on High settings, which is a typical load increase for a 1440p panel. However, the most telling data point comes at 3840x2160. Here, the RTX 4060’s 8 GB memory buffer and 128-bit bus become evident, as the Ultra preset yields just 33.9 FPS, while High manages 44.3 FPS and Medium reaches 56.5 FPS. Even Low settings only produce 79.6 FPS at 4K, a figure that is 59% lower than the same preset at 1080p.

This data suggests that the 5600G is not the limiting component at any resolution. The CPU’s 6 cores and 12 threads, boosted by a 4.40 GHz clock, are sufficient to keep the GPU saturated at 1080p and 1440p. The severe drop at 4K, particularly the 33.9 FPS Ultra result, points directly to the RTX 4060’s memory bandwidth and rasterization limits. For a smooth 4K experience, users would need to significantly reduce settings, but the 1080p and 1440p results are where this combo shines.

Resolution Scaling

The measured FPS data reveals a classic GPU-bound scaling pattern once the resolution exceeds 1080p. At 1920x1080, the RTX 4060 is the clear performance ceiling, but the 5600G ensures that ceiling is high. The jump from Low to Ultra at 1080p costs 98.9 FPS (from 195.8 to 96.9), which is a 50% reduction. This is a smaller relative drop than what occurs at 4K, where the same preset change costs 45.7 FPS (from 79.6 to 33.9), a 57% reduction. The percentage loss widening at higher resolutions confirms that pixel throughput, not CPU logic, is the bottleneck.

At 2560x1440, the combo maintains playable framerates across all presets, with the Medium preset hitting 111.3 FPS and High at 86.2 FPS. The 1440p Ultra result of 63.1 FPS is still above the 60 FPS threshold, making this resolution the sweet spot for visual fidelity. Moving to 4K changes the story entirely. The Ultra preset’s 33.9 FPS is below the acceptable threshold for a fast-paced looter shooter, while High at 44.3 FPS is borderline. The data indicates that the RTX 4060’s 272.0 GB/s memory bandwidth and 48 ROPs are insufficient for 4K Ultra, but the 56.5 FPS Medium result shows that moderate settings can still yield a playable experience.

The scaling factor between 1080p and 4K on High settings is stark: 136 FPS drops to 44.3 FPS, a 67% reduction. This is a larger drop than the 37% reduction seen when moving from 1080p to 1440p (136 to 86.2 FPS). The non-linear scaling is characteristic of a GPU that becomes overwhelmed by the 8.3 million pixel count of 4K. For this combo, 1440p is the practical ceiling for high-refresh gaming, while 4K is only viable with reduced settings.

FAQ

*Q: What is the best resolution for the RTX 4060 and Ryzen 5 5600G in Outriders?*

A: The data shows 2560x1440 as the optimal balance, with High settings delivering 86.2 FPS and Ultra hitting 63.1 FPS. At 1080p, the combo exceeds 136 FPS on High, but 1440p offers a better visual experience without sacrificing 60 FPS gameplay.

*Q: Can this combo handle 4K gaming in Outriders?*

A: Yes, but with significant compromises. The Medium preset at 3840x2160 averages 56.5 FPS, while High drops to 44.3 FPS and Ultra falls to 33.9 FPS. Low settings are required for a stable 60 FPS target, hitting 79.6 FPS.

Q: How does the CPU affect performance at 1080p?

A: The Ryzen 5 5600G’s 6 cores and 12 threads, with a boost clock of 4.40 GHz, are sufficient to push the RTX 4060 to 195.8 FPS on Low settings at 1080p. The CPU is not the bottleneck; the GPU’s pixel fill rate limits the Ultra preset to 96.9 FPS.

Q: What is the performance difference between Medium and High at 1440p?

A: Medium averages 111.3 FPS, while High averages 86.2 FPS. This is a 22.5% drop in framerate for a visual upgrade, suggesting High is the better choice for most players, as it remains well above 60 FPS.

Q: Is the RTX 4060’s 8 GB memory sufficient for Ultra settings?

A: The 4K Ultra result of 33.9 FPS indicates that the 8 GB GDDR6 buffer and 128-bit bus are stressed at high resolutions. At 1440p Ultra, the combo manages 63.1 FPS, showing the memory is adequate for that resolution but not for 4K.

Q: How does the combo rank against other tested systems?

A: This specific configuration ranks 917th out of 1693 tested combos for Outriders. This places it in the middle of the pack, reflecting its strong 1080p and 1440p performance but weaker 4K showing.

Settings Recommendations

For the best experience measured in the data, the 2560x1440 High preset stands out as the optimal choice. It delivers an average of 86.2 FPS, which is smooth for a looter shooter, while maintaining visual quality that is noticeably better than Medium. The Medium preset at 1440p offers 111.3 FPS, but the 25 FPS gain is not worth the loss of shadow and texture detail. For players with 1080p displays, the High preset at 136 FPS is the clear winner, as it provides a high refresh rate experience without the performance tax of Ultra (96.9 FPS).

If a player insists on 4K, the data suggests using the Medium preset, which yields 56.5 FPS. This is the only 4K preset that approaches playable framerates. The High preset at 44.3 FPS is playable but will feel stuttery in combat, and Ultra at 33.9 FPS is not recommended for any action-oriented gameplay. The Low preset at 4K (79.6 FPS) is viable but severely degrades visual fidelity, making it a poor trade-off. For the majority of users, the 1440p High preset provides the best balance of framerate and image quality, as it avoids the 30% performance drop seen when moving to Ultra while still exceeding 60 FPS.

The data also shows that the 1080p Ultra preset, at 96.9 FPS, is a viable alternative for those who prioritize visual effects over raw framerate. However, the 1440p High preset offers a similar pixel count to 1080p Ultra but with better anti-aliasing and texture filtering, making it the superior choice overall. Players with high-refresh monitors should target the 1080p Low preset (195.8 FPS) only for competitive play, as the visual downgrade is substantial.

How This Combo Ranks

In the database of measured configurations, the Ryzen 5 5600G and RTX 4060 combination ranks 917th out of 1693 tested combos for Outriders. This places it in the 54th percentile, meaning it outperforms 54% of all tested systems but is bested by 46%. This mid-pack ranking is consistent with the hardware’s specifications: the RTX 4060 sits at the 66th percentile among all GPUs, while the 5600G is at the 78th percentile among all CPUs. The combination of a strong CPU and a mid-range GPU results in a system that excels at lower resolutions but struggles at 4K.

The GPU’s nearest rivals in the database include the AMD Radeon RX 6600M, which scores 23321 on average (0.6% higher than the RTX 4060’s 23181), and the Intel Arc B580, which scores 23021 (0.7% lower). These margins are negligible, indicating that the RTX 4060 performs essentially identically to its direct competitors in synthetic benchmarks. However, in Outriders specifically, the combo’s rank suggests that the game’s engine favors the RTX 4060’s Ada Lovelace architecture, as the 4K results are notably weaker than the 1440p results.

The CPU’s rivals tell a similar story. The Intel Core i7-11600H scores 19949 (0.2% lower than the 5600G’s 19983), while the AMD EPYC 7713P scores 20024 (0.2% higher). These differences are within noise, confirming that the 5600G provides competitive multi-threaded performance for its class. The combo’s 917th rank is not a reflection of weak components, but rather the vast number of high-end systems in the database that feature more powerful GPUs like the RTX 4080 or RX 7900 XTX. For a mid-range pairing, this rank is respectable.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Cezanne. It has a base clock of 3.90 GHz and a boost clock of 4.40 GHz, with a 65 W TDP. In Outriders, the CPU’s role is to feed the RTX 4060 with enough draw calls and game logic to avoid stalling the GPU. The benchmark data shows that the 5600G succeeds at this task at 1080p and 1440p, where the GPU is the primary bottleneck. The 1080p Low result of 195.8 FPS is particularly telling, as it demonstrates that the CPU can sustain high frame rates without becoming a limiting factor.

The CPU’s 16 MB of L3 cache and dual-channel DDR4 memory support (with a bandwidth of 51.2 GB/s) are sufficient for the game’s streaming requirements. The 5600G’s single-thread performance, as measured by a Passmark single-thread score of 3177, is strong enough to handle the game’s main thread, which is often the bottleneck in looter shooters with complex physics and AI. The multi-threaded score of 19717 on Passmark indicates that the 12 threads are well-utilized during large-scale combat scenarios with multiple enemies.

However, the CPU’s role diminishes at 4K, as the RTX 4060’s 15.11 TFLOPS of FP32 performance and 118.1 GPixel/s pixel rate become the limiting factors. The 4K Ultra result of 33.9 FPS is not a CPU limitation; even a faster CPU would not improve this score because the GPU cannot render enough pixels. The 5600G’s 78th percentile ranking among all CPUs confirms that it is a solid mid-range processor, but it is not the star of this pairing. Instead, it provides a stable foundation that allows the RTX 4060 to perform to its full potential at resolutions below 4K.