Outriders

Outriders

AVERAGE FPS
114
good

This combination provides smooth gameplay with an average of 114 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 50 67 92
1440p QHD 69 96 128 175
1080p Full HD 109 152 184 206

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 92
3840x2160 Medium 67
3840x2160 High 50
3840x2160 Ultra 36
2560x1440 Low 175
2560x1440 Medium 128
2560x1440 High 96
2560x1440 Ultra 69
1920x1080 Low 206
1920x1080 Medium 184
1920x1080 High 152
1920x1080 Ultra 109

Outriders with AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 3070, In-Depth Analysis

The AMD Ryzen 5 5600GT paired with the NVIDIA GeForce RTX 3070 delivers a strong 1080p and 1440p experience in Outriders, but the data clearly shows where the system's limits lie. At 4K, the frame rates drop significantly, revealing a GPU-bound scenario. This combination ranks in the 60th percentile of all tested combos for this game, suggesting a balanced pairing that excels at high refresh rate gaming without being top-tier for 4K.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern: performance scales almost linearly with resolution, indicating that the NVIDIA GeForce RTX 3070 is the primary limiting factor as pixel count increases. At 1080p with High settings, the system produces 152 FPS. Moving to 1440p on the same settings drops that to 96 FPS, a 37% reduction. Pushing further to 4K High yields only 50 FPS, which is a 67% drop from the 1080p result.

This scaling pattern is typical for a system where the GPU is heavily loaded. The CPU, with its 6 cores and 12 threads based on Zen 3 architecture, is capable of feeding the GPU at lower resolutions. The 1080p Low preset achieves 206 FPS, which is likely near the CPU's practical limit for this game. The fact that 1440p Low still holds 175 FPS suggests that the CPU is not the bottleneck even at higher resolutions, as the frame rate remains very high.

The most telling data point is the difference between 1080p Low (206 FPS) and 1440p Low (175 FPS). This 15% reduction in frame rate for a 77% increase in pixel count is relatively small, indicating that the CPU can maintain a high throughput. However, when you look at the 4K results, the picture changes. The gap between 4K Low (92 FPS) and 4K Medium (67 FPS) is a 27% drop, while the drop from 4K Medium to 4K High (50 FPS) is another 25%. This shows that as the visual load increases, the GPU's compute and memory bandwidth become the deciding factor.

The data suggests that for competitive play or high refresh rate monitors, 1080p is the sweet spot, with all presets from Low to High exceeding 100 FPS. For a balance of visual fidelity and smoothness, 1440p is viable, but only up to High settings. The 4K Ultra preset, which yields just 36 FPS, is not a playable option for most users, confirming that this combination is not designed for 4K gaming.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Outriders?

A: Based on the measured data, 1440p provides the best balance. The High preset delivers 96 FPS, which is smooth and looks significantly better than 1080p. While 1080p can reach higher frame rates (up to 206 FPS on Low), 1440p High at 96 FPS is a more immersive experience without sacrificing playability.

Q: Can this system handle 4K gaming in Outriders?

A: Only at lower settings. The 4K Low preset achieves 92 FPS, which is playable. However, 4K Medium drops to 67 FPS, and 4K High falls to 50 FPS. The 4K Ultra preset is not viable at 36 FPS. For a consistent 60 FPS experience at 4K, you would need to stick to Low or Medium settings.

Q: How much of a performance gap is there between the Low and Ultra presets?

A: The gap is substantial. At 1080p, Ultra (109 FPS) is 47% slower than Low (206 FPS). At 1440p, the difference is larger: Ultra (69 FPS) is 61% slower than Low (175 FPS). At 4K, the gap widens further, with Ultra (36 FPS) being 61% slower than Low (92 FPS).

Q: Is the CPU or GPU the bottleneck in this pairing?

A: The data indicates the GPU is the primary bottleneck at higher resolutions. The CPU's strong performance is evident at 1080p Low, where it pushes 206 FPS. However, as resolution increases, the frame rate drops consistently, which is a classic sign of GPU limitation. The CPU has enough headroom to support the GPU at 1440p and even 4K.

Q: What is the expected frame rate at 1440p Medium settings?

A: The measured average is 128 FPS, with a minimum of 108 FPS and a maximum of 147 FPS. This is a very smooth experience, well above the 60 FPS threshold, and it is a good recommendation for those who want high visual quality without a significant performance hit.

Q: How does this combo rank compared to other tested systems?

A: The combination ranks 1477th out of 3710 tested combos, placing it in the 60th percentile. This indicates a solid mid-to-high-tier pairing. It is not an extreme enthusiast setup, but it outperforms the majority of systems tested for this game.

GPU Role

The NVIDIA GeForce RTX 3070 is the workhorse of this pairing, and its specifications directly explain the measured performance. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. This memory configuration is sufficient for Outriders at 1080p and 1440p, as evidenced by the high frame rates. However, at 4K, the memory bandwidth and capacity become more stressed, contributing to the significant performance drop.

The GPU's boost clock of 1725 MHz, combined with its 5888 shading units, delivers 20.31 TFLOPS of FP32 compute. This raw power is what drives the high frame rates at lower resolutions. The data shows that the GPU is capable of extreme performance when not constrained by pixel count. The 1080p Low result of 206 FPS demonstrates the raw throughput of the card.

A key observation is the performance scaling across presets. The 4K results show a clear progression: Low (92 FPS) to Medium (67 FPS) to High (50 FPS) to Ultra (36 FPS). This pattern suggests that the GPU's memory bandwidth is a limiting factor at higher resolutions and settings. The 8 GB VRAM capacity might also be a concern at 4K Ultra, although the data does not provide direct evidence of VRAM overflow (no minimum frame rate data for Ultra presets). The lack of min/max data for most presets makes it difficult to assess frame time consistency, but the average FPS trends are clear.

The RTX 3070's 184 texture mapping units and 96 ROPs handle the game's visual effects well. The texture rate of 317.4 GTexel/s and pixel rate of 165.6 GPixel/s are high enough to support the observed performance at 1440p. The GPU is clearly the dominant component in this system, and its characteristics define the playable settings at each resolution.

How This Combo Ranks

In the database of tested combinations for Outriders, this specific pairing of the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 3070 holds a rank of 1477 out of 3710. This places it in the 60th percentile of all tested systems, meaning it performs better than 60% of the combinations tested for this game. This is a respectable position, indicating that the pairing is well-matched and delivers above-average performance.

To contextualize this rank, the CPU itself has a percentile of 74 against all CPUs, while the GPU has a percentile of 61 against all GPUs. The combo rank of 60th percentile is slightly lower than the CPU's individual percentile, which suggests that the GPU is the limiting factor in this pairing. The CPU has more headroom relative to its peers than the GPU does, which is consistent with the resolution scaling analysis.

Looking at the CPU's nearest rivals, the AMD Ryzen 5 5600GT is nearly identical in average benchmark score to the Intel Core i5-12490F, with a delta of -0.3%. This means the CPU is on par with a popular mid-range Intel option. The GPU, on the other hand, is closely matched with the AMD Radeon RX 7600 XT, with a delta of 0.7% in favor of the RTX 3070. This suggests that the GPU is competitive with current-generation mid-range offerings.

The combo's rank of 1477 out of 3710 is not in the top tier, but it is far from the bottom. It indicates a system that is capable of high-refresh-rate 1080p gaming and comfortable 1440p gaming, but it is not built for 4K. Users with this combination should adjust their expectations accordingly, targeting 1440p as the primary resolution for a balanced experience.

Measured FPS Breakdown

The measured data provides a complete picture of performance across three resolutions and four quality presets.

1920x1080 (1080p):

  • Low: 206 FPS average. This is the highest frame rate recorded for this system, indicating no significant bottleneck.
  • Medium: 184 FPS average, with a minimum of 156 FPS and a maximum of 211 FPS. The minimum frame rate is still very high, ensuring smooth gameplay.
  • High: 152 FPS average. A solid result for high-refresh-rate monitors.
  • Ultra: 109 FPS average. This is still well above the 60 FPS threshold and is a viable option for those who prioritize visual quality.

2560x1440 (1440p):

  • Low: 175 FPS average. Demonstrates that the CPU can still feed the GPU effectively at this resolution.
  • Medium: 128 FPS average, with a minimum of 108 FPS and a maximum of 147 FPS. The minimum frame rate is above 100 FPS, which is excellent.
  • High: 96 FPS average. This is a very playable frame rate, close to the 100 FPS mark.
  • Ultra: 69 FPS average. This is a significant drop from High, suggesting that Ultra settings are taxing on the GPU.

3840x2160 (4K):

  • Low: 92 FPS average. Surprisingly high for 4K, indicating the game scales well on lower settings.
  • Medium: 67 FPS average, with a minimum of 57 FPS and a maximum of 77 FPS. The minimum frame rate is close to the 60 FPS target, but might be noticeable in intense scenes.
  • High: 50 FPS average. This is below the ideal 60 FPS threshold, making it less desirable for smooth gameplay.
  • Ultra: 36 FPS average. This is not a playable setting for a smooth experience.

The data shows that the system has a wide performance range, from 36 FPS at 4K Ultra to 206 FPS at 1080p Low. The sweet spot for this combo is clearly 1440p, where it can maintain high frame rates across all but the most demanding preset.

Settings Recommendations

Based on the measured frame rates, the optimal settings depend on the user's monitor and priorities. For users with a 1080p monitor, the High preset at 152 FPS is the best recommendation. It offers a significant visual upgrade over Medium (184 FPS) while still delivering frame rates that exceed the refresh rate of most 1080p monitors (typically 144 Hz or 165 Hz). The Ultra preset at 109 FPS is also viable, but the 43 FPS drop from High is a steep price for the marginal visual improvements.

For 1440p monitors, the Medium preset at 128 FPS is the clear winner. The minimum frame rate of 108 FPS ensures a smooth experience, and the visual quality is still high. The High preset at 96 FPS is also a good choice for those who prefer visual fidelity, but the drop below 100 FPS might be noticeable to sensitive users. The Ultra preset at 69 FPS is not recommended, as it is starting to approach the edge of playability for a fast-paced looter shooter.

For 4K displays, the situation is more complex. The Low preset at 92 FPS is the only option that provides a consistently smooth experience. The Medium preset at 67 FPS is playable, but the minimum frame rate of 57 FPS could lead to occasional stutters. Users with 4K monitors should strongly consider using the Low preset to maintain a high frame rate, or they should reduce the resolution to 1440p for a better balance of quality and performance.

In summary, the data suggests the following hierarchy for the best experience:

1. 1440p Medium – 128 FPS average, best balance of visual quality and performance.

2. 1080p High – 152 FPS average, ideal for high refresh rate 1080p monitors.

3. 1440p High – 96 FPS average, for users who prioritize image quality over maximum frame rate.

4. 4K Low – 92 FPS average, the only acceptable 4K option for smooth gameplay.

This system is not a 4K powerhouse, but it excels at 1080p and 1440p, making it a great choice for high-refresh-rate gaming.

Hardware Specifications

AMD Ryzen 5 5600GT

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 3070 in Outriders

Resolution Settings Avg FPS
3840x2160 Low 92.0
3840x2160 Medium 67.0
3840x2160 High 50.0
3840x2160 Ultra 36.0
2560x1440 Low 175.0
2560x1440 Medium 128.0
2560x1440 High 96.0
2560x1440 Ultra 69.0
1920x1080 Low 206.0
1920x1080 Medium 184.0
1920x1080 High 152.0
1920x1080 Ultra 109.0

Outriders with Ryzen 5 5600GT + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RTX 3070 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with Ryzen 5 5600GT + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.