Outriders

The AMD Ryzen 5 5600X and NVIDIA GeForce RTX 4060 pairing delivers a wide performance envelope in Outriders, scaling from a high-refresh-rate 1080p experience to a playable-but-strained 4K presentation. The measured data reveals a system where the GPU becomes the dominant constraint as resolution increases, while the CPU’s strong single-thread capabilities keep frame rates high at lower resolutions.

Resolution Scaling

The frame rate drop from 1080p to 4K is substantial, reflecting the heavy graphical load of Outriders on the RTX 4060. At Low settings, the average FPS falls from 206.4 at 1920x1080 to 153.5 at 2560x1440, before settling at 78.5 at 3840x2160. This represents a 62% reduction from 1080p to 4K, indicating that even at the lowest visual fidelity, the GPU’s pixel-pushing capacity is the limiting factor at higher resolutions. The gap between 1440p and 4K is notably larger than the gap between 1080p and 1440p, suggesting a nonlinear scaling curve where the RTX 4060’s 128-bit memory bus and 272.0 GB/s bandwidth begin to throttle throughput.

At High settings, the trend continues but with more pronounced drops. The average FPS goes from 134.0 at 1080p to 87.1 at 1440p, then down to 44.4 at 4K. The 4K figure is less than half of the 1080p result, showing that the increased shading complexity at High quality amplifies the GPU bottleneck. The Ultra preset, which is the most demanding, yields 94.2 FPS at 1080p, 62.4 FPS at 1440p, and just 31.0 FPS at 4K. The latter number is barely above playable thresholds, and the data clearly shows that 4K Ultra is not a viable target for this combination.

The scaling pattern suggests that the Ryzen 5 5600X, with its 6 cores and 12 threads, is not the primary constraint in this game. At 1080p Low, the 206.4 FPS average is high enough that CPU overhead could theoretically become relevant, but the consistent drops across all settings point to the RTX 4060 being the performance limiter. The 3.70 GHz base and 4.60 GHz boost clocks provide ample single-thread headroom, which Outriders leverages effectively. In summary, this combo is best suited for 1080p and 1440p gaming, where the GPU can maintain high frame rates without being overwhelmed.

FAQ

Q: How does the combo perform at 1440p Ultra settings?

A: At 2560x1440 with Ultra settings, the average FPS is 62.4. This is a playable frame rate for most users, though it sits below the 1440p High result of 87.1 FPS. The Ultra preset introduces a significant performance cost, trading about 28% of the frame rate for additional visual fidelity.

Q: What is the highest average FPS recorded for this pairing?

A: The highest average FPS is 206.4, achieved at 1920x1080 with Low settings. This indicates the system can easily handle high-refresh-rate monitors at 1080p when visual quality is reduced.

Q: Is 4K gaming viable with this hardware?

A: At 3840x2160, the best average FPS comes from Low settings at 78.5 FPS, which is playable. However, High and Ultra presets drop to 44.4 FPS and 31.0 FPS respectively, making them less suitable for smooth gameplay. The data suggests 4K is only viable with lower settings.

Q: How does the RTX 4060 rank compared to its nearest rivals in GPU benchmarks?

A: The RTX 4060’s average benchmark score is 23181. It sits 0.6% below the AMD Radeon RX 6600M (23321) and 0.7% below the NVIDIA GeForce GTX 780 Ti (23338). It is 0.7% ahead of the Intel Arc B580 (23021) and 0.8% ahead of the AMD Radeon 760M (22999).

*Q: What is the combo’s overall ranking position in Outriders?*

A: The AMD Ryzen 5 5600X + NVIDIA GeForce RTX 4060 combination ranks 914th out of 1693 tested combos in this game. This places it in the middle of the pack, indicating a balanced but not top-tier configuration.

Q: Does the CPU show any signs of bottlenecking at lower resolutions?

A: The data does not indicate a CPU bottleneck. At 1080p Low, the average FPS of 206.4 is high, but the Ryzen 5 5600X’s single-thread benchmark scores (e.g., 917 in 3dmark single-thread) suggest it can handle such frame rates. The consistent performance scaling across settings points to the GPU as the primary limiter.

GPU Role

The NVIDIA GeForce RTX 4060 is the core of this system’s graphics performance, and its specifications directly explain the measured results. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 272.0 GB/s. This memory configuration is adequate for 1080p and 1440p gaming, but the 4K results show its limitations. At Ultra settings in 4K, the average FPS drops to 31.0, which is likely due to the memory bandwidth and the 15.11 TFLOPS FP32 compute capacity being stretched thin by the increased pixel count and texture detail.

The clock speeds are also relevant. The base clock is 1830 MHz and the boost clock is 2460 MHz, which are moderate for the GeForce 40-series. The 3072 shading units and 48 ROPs handle the rasterization workload, but the 128-bit memory bus is a known constraint for higher resolutions. In Outriders, this manifests as a steep performance drop between 1440p and 4K across all settings. For instance, at Medium settings, the average FPS falls from 109.7 at 1440p to 57.7 at 4K, which is a 47% reduction.

The GPU’s 24 RT cores and 96 tensor cores are present, but Outriders is not heavily ray-traced, so the standard raster performance is the primary factor. The 8 GB VRAM is sufficient for the game’s textures at 1080p and 1440p, but at 4K Ultra, there may be memory pressure, contributing to the low 31.0 FPS average. The data indicates that the RTX 4060 is a capable mid-range card that excels at 1080p and handles 1440p well, but it is not designed for 4K gaming beyond Low or Medium settings.

How This Combo Ranks

In the database of tested combinations for Outriders, this pairing of the AMD Ryzen 5 5600X and NVIDIA GeForce RTX 4060 holds a rank of 914 out of 1693 combos. This places it just below the median, indicating that while it delivers playable performance, there are many other configurations that achieve higher frame rates. The rank is likely influenced by the GPU’s mid-range positioning, as the CPU is relatively strong. For context, the Ryzen 5 5600X has a percentile rank of 78 among all CPUs, meaning it outperforms most processors, but the RTX 4060 has a percentile rank of 66 among all GPUs, which is lower.

The combo’s position suggests that the GPU is the limiting factor in determining its overall standing. The CPU’s nearest rivals, such as the AMD Ryzen 5 5600GT (deltaPct -0.3) and Intel Core i7-10700 (deltaPct -0.3), have similar average benchmark scores, so the CPU is not dragging the combo down. Conversely, the GPU’s nearest rivals, including the AMD Radeon RX 6600M (deltaPct -0.6) and NVIDIA GeForce GTX 780 Ti (deltaPct -0.7), are slightly faster on average, which could explain why the combo does not rank higher. The 914th position out of 1693 is a solid mid-pack result, showing that this hardware is a balanced choice for 1080p and 1440p gaming but not a top-tier performer for maximum settings at high resolutions.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four settings presets. At 1920x1080, the averages are 206.4 FPS on Low, 175.3 FPS on Medium, 134.0 FPS on High, and 94.2 FPS on Ultra. This shows a clear progression where each step up in settings costs roughly 20-30% of the frame rate. The 1080p results are all above 90 FPS, making this resolution ideal for high-refresh-rate displays.

At 2560x1440, the averages are 153.5 FPS on Low, 109.7 FPS on Medium, 87.1 FPS on High, and 62.4 FPS on Ultra. The drop from 1080p is significant, especially at Ultra where the frame rate falls below 60 FPS. The Low preset still offers a very smooth experience, but the higher presets require a compromise between quality and smoothness. At 3840x2160, the averages are 78.5 FPS on Low, 57.7 FPS on Medium, 44.4 FPS on High, and 31.0 FPS on Ultra. Only the Low preset maintains a frame rate above 60 FPS, while the Ultra preset is barely playable.

The data shows a consistent pattern across all settings: the RTX 4060 loses roughly half its performance when moving from 1080p to 4K. For example, at High settings, the 134.0 FPS at 1080p drops to 44.4 FPS at 4K, a 67% reduction. This is a steep penalty that reflects the GPU’s memory bandwidth and compute limits. The Medium settings at 1440p (109.7 FPS) and Low settings at 4K (78.5 FPS) are the sweet spots for balancing visual quality and frame rate.

Settings Recommendations

Based on the measured data, the optimal settings for this combo depend on the target resolution and desired frame rate. For 1080p gaming, the High preset at 134.0 FPS is the best balance of visual fidelity and performance, as it provides a smooth, high-refresh experience without the steep cost of Ultra. The Ultra preset at 94.2 FPS is still playable and offers the best visuals, but the 30% frame rate drop from High may not be worth it for competitive play. For users prioritizing maximum smoothness, the Low preset at 206.4 FPS is exceptional but sacrifices too much visual quality for most players.

At 1440p, the High preset at 87.1 FPS is the recommended choice, as it offers a good balance of detail and frame rate. The Medium preset at 109.7 FPS is also a solid option for those who prefer higher frame rates, while the Ultra preset at 62.4 FPS is borderline and may cause noticeable stuttering on some displays. For 4K, the Low preset at 78.5 FPS is the only fully playable option, but the Medium preset at 57.7 FPS is acceptable for slower-paced gameplay. The High and Ultra presets at 44.4 FPS and 31.0 FPS respectively are not recommended, as they fall below the threshold for smooth motion.

Overall, the data indicates that this combo is best utilized at 1080p High or 1440p Medium/High settings. The RTX 4060’s 8 GB VRAM and 272.0 GB/s bandwidth are sufficient for these configurations, providing a responsive experience. For 4K, lowering settings to Low is necessary to maintain a playable frame rate, but the visual compromise is significant. Users should prioritize 1080p or 1440p to get the most out of this hardware pairing.