Microsoft Flight Simulator

Microsoft Flight Simulator

AVERAGE FPS
23
limited

This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 16 20 21
1440p QHD 20 16 26 30
1080p Full HD 23 26 31 39

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 21
3840x2160 Medium 20
3840x2160 High 16
3840x2160 Ultra 13
2560x1440 Low 30
2560x1440 Medium 26
2560x1440 Ultra 20
2560x1440 High 16
1920x1080 Low 39
1920x1080 Medium 31
1920x1080 High 26
1920x1080 Ultra 23

Microsoft Flight Simulator with AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

Microsoft Flight Simulator is a notoriously demanding title, and the combination of the AMD Ryzen 5 7500F with the NVIDIA GeForce GTX 1050 Ti produces a very specific performance profile. The benchmark data shows a system that is heavily constrained by its graphics card, resulting in playable frame rates only at the lowest settings and resolutions. This analysis breaks down the measured performance, the CPU and GPU roles, and what the numbers mean for a builder considering this pairing.

Resolution Scaling

The frame rate scaling from 1080p to 4K clearly exposes the GTX 1050 Ti as the primary limiting factor. At 1080p with Low settings, the combo achieves an average of 39.2 FPS. Moving to 1440p Low drops that to 30 FPS, a 23.5% reduction. At 4K Low, the average falls further to 20.8 FPS. This steep decline with increasing resolution is a textbook sign of a GPU-bound scenario; the CPU has ample headroom, but the graphics card simply cannot push more pixels.

The trend is consistent across all settings. At High settings, the average FPS is 25.9 at 1080p, 16 at 1440p, and 16 at 4K. The 1440p and 4K results being identical suggests that at these higher resolutions, the GPU is hitting a hard performance wall regardless of the minor pixel count difference, likely due to the 4GB VRAM buffer being saturated. The scaling from 1080p to 1440p at High is a steep 38.2% drop, reinforcing that the GPU is overwhelmed.

The data indicates that the CPU is not the bottleneck in this configuration. The Ryzen 5 7500F, with its 6 cores and 12 threads, is far more capable than the GTX 1050 Ti. The frame rate is dictated almost entirely by the GPU's rendering capabilities. For a builder, this means that any attempt to improve performance should start with a graphics card upgrade; the CPU is unlikely to hold back a more powerful GPU in this title.

How This Combo Ranks

In the database of tested combos for Microsoft Flight Simulator, this pairing ranks 1762 out of 1795. This places it in the bottom 2% of all tested configurations. This is a very low ranking, indicating that the overall performance is at the extreme low end of the spectrum. The ranking reflects the severe bottleneck created by the GTX 1050 Ti, which is an end-of-life product from 2016.

The GPU's own percentile ranking is 30, meaning it performs better than only 30% of all GPUs in the database. Its average benchmark score is 5316, placing it in the company of the NVIDIA GeForce 930A (5317, 0% delta), the NVIDIA GeForce 940M (5297, 0.4% faster), and the AMD Radeon R7 240 (5280, 0.7% faster). This confirms the GTX 1050 Ti's position as a low-end, entry-level part.

In stark contrast, the CPU's percentile ranking is 82, and its average benchmark score is 24993. This places it near the Intel Core i7-11850H (24974, 0.1% faster), the AMD Ryzen 7 2700X (25057, 0.3% faster), and the AMD Ryzen 5 8400F (25064, 0.3% faster). The massive disparity between the CPU's high percentile and the GPU's low percentile is the core issue. The combo's rank is dragged down entirely by the GPU, highlighting a severely imbalanced system for this specific, demanding game.

CPU Role

The AMD Ryzen 5 7500F is a modern 6-core, 12-thread processor based on the Zen 4 architecture on a 5nm process. It has a base clock of 3.70 GHz and a boost clock of 5.00 GHz. It supports DDR5 memory with a dual-channel bus, providing a memory bandwidth of 83.2 GB/s. In synthetic benchmarks, it scores 22799 in Cinebench R23 multicore and 3218 in single-core, demonstrating strong all-around performance.

For Microsoft Flight Simulator, a game known for being CPU-intensive, this processor provides a solid foundation. However, the measured FPS data shows that its potential is completely untapped. The 1080p Low average of 39.2 FPS is not a reflection of the CPU's capability; it is the maximum output the GTX 1050 Ti can manage. The CPU is effectively waiting for the GPU at every frame.

The CPU's performance relative to its rivals confirms its strength. It is essentially on par with the Intel Core i7-11850H and the AMD Ryzen 9 6900HX, while slightly edging out the AMD Ryzen 7 2700X in some tests. This means that in a balanced system, this CPU would not be the limiting factor. In this specific combo, its power is wasted, as the GPU cannot translate the CPU's computational speed into higher frame rates.

Measured FPS Breakdown

The measured FPS data provides a clear picture of the system's limits. At 1920x1080, the results are as follows: Low settings yield an average of 39.2 FPS, Medium 31.1 FPS, High 25.9 FPS, and Ultra 23.2 FPS. This shows a clear and expected performance degradation as settings increase, but even the best-case scenario at Low is barely on the edge of playability.

At 2560x1440, the averages drop significantly: Low is 30 FPS, Medium 25.8 FPS, High 16 FPS, and Ultra 19.6 FPS. The anomaly here is that High is lower than Ultra, which could be due to specific in-game asset loading or a measurement quirk, but the overall trend is a severe decline. The 1440p results are largely unplayable for a smooth experience.

At 3840x2160, the system is effectively overwhelmed. The averages are 20.8 FPS at Low, 20.1 FPS at Medium, 16 FPS at High, and 12.7 FPS at Ultra. These numbers confirm that 4K gaming is not a realistic option for this hardware combination. The data consistently shows that the GTX 1050 Ti is the bottleneck, as the frame rates are far too low to be attributed to any CPU limitation.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is an old, entry-level graphics card from the GeForce 10-series, based on the Pascal architecture and built on a 14nm process. It has 768 shading units, 48 TMUs, and 32 ROPs. Its boost clock is 1392 MHz, and it features 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. Its FP32 performance is rated at 2.138 TFLOPS.

This GPU is the definitive bottleneck in this system. Its 4 GB of VRAM is a severe limitation for a game like Microsoft Flight Simulator, which streams vast amounts of terrain and scenery data. The lack of VRAM likely causes texture thrashing, which explains the poor scaling and the near-identical performance between 1440p and 4K at High settings. The GPU's 30th percentile ranking and its proximity in performance to mobile and entry-level desktop parts like the GeForce 940M and Radeon R7 240 underscore its lowly position.

The benchmark results show that this card is only capable of producing playable frame rates at 1080p with Low settings, and even then, it averages just under 40 FPS. For a flight simulator that benefits from smooth visuals, this is a marginal experience. The GPU's end-of-life status and its performance level make it a poor match for a modern, powerful CPU like the Ryzen 5 7500F. The data suggests that this pairing is only suitable for the most basic, low-resolution play.

FAQ

Q: What is the best average FPS this combo can achieve at 1080p?

A: The highest average FPS is 39.2, but only with Low settings. At Medium, it drops to 31.1 FPS.

Q: Is this combo capable of 4K gaming in Microsoft Flight Simulator?

A: No. The measured average FPS at 4K ranges from 20.8 at Low to 12.7 at Ultra, which is not playable.

Q: Why is the performance so low despite having a strong CPU?

A: The NVIDIA GeForce GTX 1050 Ti is the limiting factor. Its performance is far below that of the Ryzen 5 7500F, creating a severe GPU bottleneck.

Q: How does this combo rank compared to all other tested combinations?

A: It ranks 1762 out of 1795 total combos, placing it in the bottom 2% of tested systems for this game.

Q: What is the GPU's performance relative to its nearest rivals?

A: Its average benchmark score of 5316 is essentially tied with the NVIDIA GeForce 930A (5317), and it is slightly slower than the NVIDIA GeForce 940M (5297) and AMD Radeon R7 240 (5280).

Q: What is the CPU's performance relative to its nearest rivals?

A: The CPU's average benchmark score of 24993 is nearly identical to the Intel Core i7-11850H (24974) and the AMD Ryzen 9 6900HX (24897), showing it is a high-performing part.

Hardware Specifications

AMD Ryzen 5 7500F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 5000 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1050 Ti in Microsoft Flight Simulator

Resolution Settings Avg FPS
3840x2160 Low 20.8
3840x2160 Medium 20.1
3840x2160 High 16.0
3840x2160 Ultra 12.7
2560x1440 Low 30.0
2560x1440 Medium 25.8
2560x1440 Ultra 19.6
2560x1440 High 16.0
1920x1080 Low 39.2
1920x1080 Medium 31.1
1920x1080 High 25.9
1920x1080 Ultra 23.2

Microsoft Flight Simulator with Ryzen 5 7500F + Other GPUs

See how Microsoft Flight Simulator performs with the same CPU but different graphics cards.

Microsoft Flight Simulator with GTX 1050 Ti + Other CPUs

See how Microsoft Flight Simulator performs with the same GPU but different processors.

Other Games with Ryzen 5 7500F + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.