Microsoft Flight Simulator

Microsoft Flight Simulator

AVERAGE FPS
23
limited

This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 14 18 23
1440p QHD 17 18 24 31
1080p Full HD 22 23 30 39

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 23
3840x2160 Medium 18
3840x2160 High 14
3840x2160 Ultra 13
2560x1440 Low 31
2560x1440 Medium 24
2560x1440 High 18
2560x1440 Ultra 17
1920x1080 Low 39
1920x1080 Medium 30
1920x1080 High 23
1920x1080 Ultra 22

Microsoft Flight Simulator with AMD Ryzen 5 8400F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

The AMD Ryzen 5 8400F and NVIDIA GeForce GTX 1050 Ti pairing delivers a fundamentally GPU-bound experience in Microsoft Flight Simulator, with the data showing that the GTX 1050 Ti's 4 GB memory and Pascal architecture are the primary limiting factors across all tested resolutions. This combination ranks 3665th out of 3714 tested combos in this game, placing it in the bottom 1.3% of all configurations, yet the benchmark results reveal a surprisingly playable experience at lower settings that suggests the CPU has untapped headroom.

Resolution Scaling

The FPS drop from 1080p to 4K in Microsoft Flight Simulator is dramatic, and the pattern across settings reveals a clear story about which component is holding this system back. At Low settings, the average frame rate falls from 39 FPS at 1920x1080 to 23 FPS at 3840x2160 — a reduction of 16 FPS, or approximately 41% of the 1080p performance. This steep decline indicates that the GTX 1050 Ti is being overwhelmed by the pixel count increase, as the GPU's 112.1 GB/s memory bandwidth and 2.138 TFLOPS of compute simply cannot sustain the fill rate demands of 4K rendering.

The scaling pattern becomes even more telling when examining the spread between Low and Ultra settings at each resolution. At 1080p, the difference between Low (39 FPS) and Ultra (22 FPS) is 17 FPS, meaning Ultra delivers only 56% of Low's frame rate. At 1440p, Low hits 31 FPS while Ultra drops to 17 FPS — a 14 FPS gap that narrows the relative performance to 55%. At 4K, Low manages 23 FPS and Ultra falls to 13 FPS, with the gap shrinking to 10 FPS but the ratio remaining consistent at 57%. This consistency across resolutions suggests that the GPU is the bottleneck at every setting level, with the CPU's 6 cores and 12 threads waiting on the graphics card to finish each frame.

The data indicates that the limiting component is unequivocally the GPU. Moving from 1080p Low to 4K Low costs 16 FPS, while moving from Low to Ultra at any single resolution costs roughly 44% of performance. If the CPU were the constraint, the frame rate would remain relatively flat across resolutions at the same settings, but the measured results show a near-linear relationship between pixel count and FPS loss. The GTX 1050 Ti's 25th percentile ranking among all GPUs and its position alongside the AMD Radeon R5 M330 (0.6% slower) and AMD Radeon Vega 3 (1.8% faster) in the average benchmark score hierarchy reinforces this conclusion — this is a low-end graphics card struggling with a modern, demanding flight simulator.

FAQ

Q: What is the best settings/resolution combination for playable frame rates?

A: The data shows that 1920x1080 with Low settings delivers 39 FPS average, which is the highest measured frame rate in the entire dataset. Medium settings at 1080p produce 30 FPS average with a minimum of 26 FPS, while High settings at 1080p drop to 23 FPS. Any resolution above 1080p or setting above Medium results in average frame rates below 31 FPS, with 4K Ultra bottoming out at 13 FPS.

Q: How does the GTX 1050 Ti's 4 GB VRAM affect performance at higher resolutions?

A: The 4 GB GDDR5 memory with 112.1 GB/s bandwidth appears to be a critical constraint, as the frame rate drops consistently when moving to higher resolutions regardless of quality settings. At 4K Ultra, the system achieves only 13 FPS, and even at Low settings the 4K resolution cannot exceed 23 FPS, suggesting the memory capacity and bandwidth are insufficient for the texture and geometry loads at those pixel densities.

Q: Is the Ryzen 5 8400F powerful enough for this game?

A: The CPU's benchmark results indicate it has substantial headroom. With a Cinebench R23 multicore score of 20851 and a single-core score of 2943, the 8400F ranks in the 77th percentile among all CPUs. The fact that frame rates scale so heavily with resolution and settings changes strongly implies that the CPU is not the bottleneck, as a CPU-limited scenario would show less variation across GPU load changes.

Q: What is the playability difference between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings achieve 39 FPS average while Ultra settings deliver 22 FPS average. This 17 FPS difference represents a 44% performance penalty for enabling maximum quality. The Medium setting provides a middle ground at 30 FPS with a 26 FPS minimum, which may be the most balanced configuration for maintaining smooth gameplay without dropping to the lowest visual quality.

Q: How does this combo compare to other tested configurations in this game?

A: This combination ranks 3665th out of 3714 tested combos in Microsoft Flight Simulator, placing it in the bottom 1.3% of all configurations. The GPU's 25th percentile standing among all GPUs and its average benchmark score of 4193, which is only 0.6% above the AMD Radeon R5 M330 and 1% above the NVIDIA Quadro K2100M, confirms that this is one of the weaker graphics solutions in the database.

Q: Is 4K gaming feasible with this hardware?

A: No, the data clearly shows that 4K is not viable for playable frame rates. The highest 4K result is 23 FPS at Low settings, which drops to 18 FPS at Medium, 14 FPS at High, and 13 FPS at Ultra. These frame rates are below the threshold for smooth gameplay in a flight simulator, where precise control inputs require consistent rendering.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the dominant factor in this system's Microsoft Flight Simulator performance, and the data paints a clear picture of its limitations. The GPU's 4 GB of GDDR5 memory on a 128-bit bus provides 112.1 GB/s of bandwidth, which is the lowest among modern discrete solutions and directly impacts how the simulator loads scenery and terrain data. The base clock of 1291 MHz and boost clock of 1392 MHz are modest by today's standards, and the Pascal architecture's 768 shading units, 48 texture mapping units, and 32 ROPs simply cannot process the complex geometry and lighting of a 2020-era flight simulator at high pixel counts.

The measured FPS data shows that the GPU's performance ceiling is remarkably low. At 1080p Low, the system achieves 39 FPS, but this drops to 22 FPS at Ultra — a 17 FPS penalty that reflects the GPU's inability to handle increased draw distances, shadow quality, and texture filtering. The 3DMark Steel Nomad DX12 score of 305 and Passmark G3D score of 6340 place the GTX 1050 Ti in the 25th percentile of all GPUs, and its average benchmark score of 4193 is essentially tied with the AMD Radeon R5 M330 (0.6% faster) and NVIDIA Quadro K2100M (1% faster). These are entry-level integrated and mobile graphics solutions, not desktop gaming GPUs.

The memory situation deserves particular attention. With 4 GB of VRAM, the GTX 1050 Ti likely hits capacity limits when Microsoft Flight Simulator loads high-resolution textures, especially at 1440p and 4K. The frame rate degradation from 1080p Low (39 FPS) to 4K Low (23 FPS) — a 16 FPS loss — is consistent with memory bandwidth saturation and potential texture swapping. The GPU's 7 Gbps effective memory speed and 1752 MHz memory clock are insufficient for the bandwidth demands of 4K rendering, and the measured results confirm this: no 4K setting exceeds 23 FPS, and even 1440p Ultra only reaches 17 FPS.

Measured FPS Breakdown

The measured FPS data provides a complete picture of this system's capabilities across resolutions and settings. At 1920x1080, the performance range spans from 39 FPS at Low settings to 22 FPS at Ultra. The Medium setting achieves 30 FPS average with a minimum of 26 FPS and maximum of 35 FPS, while High settings deliver 23 FPS average. This 1080p resolution offers the only playable frame rates in the dataset, with Low settings providing the smoothest experience at 39 FPS.

Moving to 2560x1440, the frame rates drop significantly across all settings. Low settings achieve 31 FPS average, which is 8 FPS lower than the 1080p Low result. Medium settings deliver 24 FPS average with a minimum of 21 FPS and maximum of 28 FPS, while High settings produce 18 FPS and Ultra settings fall to 17 FPS. The 1440p results show that even Low settings are borderline for smooth gameplay, and Ultra is essentially unplayable at this resolution.

At 3840x2160, the performance becomes critically low. Low settings achieve 23 FPS average, which is the best 4K result but still below the 30 FPS threshold for comfortable play. Medium settings deliver 18 FPS average with a minimum of 15 FPS and maximum of 21 FPS, while High settings manage only 14 FPS and Ultra drops to 13 FPS. The 4K results demonstrate that this GPU is not suitable for high-resolution gaming in Microsoft Flight Simulator, regardless of quality settings.

The pattern across all resolutions shows a consistent performance hierarchy: Low > Medium > High > Ultra, with the gap between Low and Ultra remaining relatively constant at 17 FPS at 1080p, 14 FPS at 1440p, and 10 FPS at 4K. This consistency suggests that the GPU's architectural limitations, rather than specific settings, are the primary determinant of performance.

How This Combo Ranks

The AMD Ryzen 5 8400F and NVIDIA GeForce GTX 1050 Ti combination ranks 3665th out of 3714 tested combos in Microsoft Flight Simulator, placing it in the bottom 1.3% of all configurations. This rank is unsurprising given the GPU's 25th percentile standing among all GPUs and its average benchmark score of 4193, which is only marginally above the AMD Radeon R5 M330 (0.6% slower) and NVIDIA Quadro K2100M (1% slower). The GPU's nearest rivals in average benchmark score include the NVIDIA Quadro K3000M (1.1% faster) and AMD Radeon Vega 3 (1.8% faster), all of which are low-end or mobile solutions.

In contrast, the CPU ranks much more favorably. The Ryzen 5 8400F's average benchmark score of 25005 places it in the 77th percentile of all CPUs, with nearest rivals including the AMD Ryzen 5 7500F (0.2% slower), Intel Core i7-11850H (0.3% slower), and Intel Core i7-13620H (0.4% slower). The CPU's Cinebench R23 multicore score of 20851 and single-core score of 2943 demonstrate solid performance for a 6-core, 12-thread processor, but this strength is completely overshadowed by the GPU's weakness in this game.

The combination rank of 3665 suggests that this pairing is severely unbalanced for Microsoft Flight Simulator. The CPU is capable of delivering much higher frame rates, as evidenced by its 77th percentile ranking, but the GPU simply cannot keep up with the rendering demands. The result is a system that performs at the level of the weakest component, which is the GTX 1050 Ti. This rank places the combination among the worst-performing configurations in the database, making it clear that this is not a viable setup for modern flight simulation at acceptable quality levels.

CPU Role

The AMD Ryzen 5 8400F provides a solid foundation for Microsoft Flight Simulator, though its performance is largely untapped in this configuration. The 6-core, 12-thread processor based on Zen 4 architecture operates at a 4.20 GHz base clock and 4.70 GHz boost clock, with 16 MB of shared L3 cache and 1 MB of L2 cache per core. The CPU's benchmark results demonstrate strong computational capability: Cinebench R23 multicore score of 20851, single-core score of 2943, and a Passmark multithread score of 24389. These results place the 8400F in the 77th percentile of all CPUs, with an average benchmark score of 25005 that is nearly identical to the AMD Ryzen 5 7500F (0.2% difference).

The CPU's role in this game appears to be secondary to the GPU bottleneck, as the frame rate data shows clear GPU limitation patterns. If the CPU were the constraint, we would expect frame rates to remain relatively stable across resolutions at the same settings, but the data shows significant drops when moving from 1080p to 1440p to 4K. The 8400F's single-thread performance, as measured by the 3DMark single-thread score of 951 and Cinebench R23 single-core score of 2943, is more than adequate for the game's main simulation thread, which typically benefits from high single-core performance.

The CPU's memory support for DDR5 with dual-channel configuration and 83.2 GB/s bandwidth provides sufficient data throughput for the game's asset streaming, though the GPU's 112.1 GB/s bandwidth is the more critical path for rendering. The 8400F's PCIe Gen 4 interface with 20 lanes offers adequate bandwidth for the GTX 1050 Ti, though the GPU's PCIe 3.0 x16 interface limits potential transfer speeds. Overall, the data suggests that upgrading the GPU would yield significant frame rate improvements, as the CPU has substantial headroom to support a more capable graphics card without becoming a bottleneck itself.

Hardware Specifications

AMD Ryzen 5 8400F

Cores / Threads 6 / 12
Base Clock 4200 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 8400F + NVIDIA GeForce GTX 1050 Ti in Microsoft Flight Simulator

Resolution Settings Avg FPS
3840x2160 Low 23.0
3840x2160 Medium 18.0
3840x2160 High 14.0
3840x2160 Ultra 13.0
2560x1440 Low 31.0
2560x1440 Medium 24.0
2560x1440 High 18.0
2560x1440 Ultra 17.0
1920x1080 Low 39.0
1920x1080 Medium 30.0
1920x1080 High 23.0
1920x1080 Ultra 22.0

Microsoft Flight Simulator with Ryzen 5 8400F + Other GPUs

See how Microsoft Flight Simulator performs with the same CPU but different graphics cards.

Microsoft Flight Simulator with GTX 1050 Ti + Other CPUs

See how Microsoft Flight Simulator performs with the same GPU but different processors.

Other Games with Ryzen 5 8400F + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.