Lockdown Protocol

Resolution Scaling

Lockdown Protocol shows a steep but predictable performance curve as resolution climbs, with the 1080p-to-4K transition costing roughly two-thirds of the frame rate at identical settings. At Low settings, the measured average drops from 202.1 FPS at 1920x1080 to 146.7 FPS at 2560x1440, then to 92.8 FPS at 3840x2160 — a 54% reduction from 1080p to 4K. The High preset follows a similar trajectory: 125.1 FPS at 1080p, 91.6 FPS at 1440p, and 60.5 FPS at 4K, representing a 52% loss from the lowest to highest resolution.

This scaling pattern indicates that the NVIDIA GeForce RTX 5060 becomes the primary limiting component as pixel count increases, particularly at 4K where even the Low preset cannot maintain triple-digit frame rates. The gap between Low and Ultra settings widens dramatically at higher resolutions: at 1080p, the difference between Low and Ultra is 106.9 FPS (202.1 versus 95.2), while at 4K that gap narrows to 49.7 FPS (92.8 versus 43.1). This compression at 4K suggests the GPU's 8 GB VRAM and 128-bit memory bus begin to throttle performance regardless of graphical fidelity, as the raw pixel throughput demands exceed what the 448.0 GB/s bandwidth can sustain.

At 1440p, the combination finds a balanced operating point: Low delivers 146.7 FPS, Medium 105.7 FPS, and High 91.6 FPS — all comfortably above 60 FPS thresholds. The data shows that 4K Ultra at 43.1 FPS is the only measured configuration that falls below playable frame rates, while 4K High at 60.5 FPS sits right at the edge of smoothness. The resolution scaling curve is notably linear rather than exponential, which points to a well-optimized engine that distributes load predictably, but the absolute numbers reveal that this hardware pairing is best suited for 1440p and below.

CPU Role

The Intel Core i5-11400F provides the processing foundation for this combo, and its benchmark results show a capable six-core, 12-thread Rocket Lake part that keeps pace with modern mobile chips. The CPU's Cinebench R23 multicore score of 14372 and single-core score of 2029 place it in the 75th percentile of all CPUs, which is respectable for a 2021 desktop processor. The 3DMark results show scaling from 868 in single-thread to 5652 in max-threads, indicating that Lockdown Protocol can leverage multiple cores effectively when needed.

In Lockdown Protocol's measured FPS, the CPU's influence is most apparent at 1080p Low where the 202.1 FPS average suggests the processor can feed frames faster than the GPU can render them at lower resolutions. The 4.40 GHz boost clock and 2.60 GHz base clock provide sufficient headroom for the game's physics and AI calculations, while the 12 MB shared L3 cache helps maintain consistent frame pacing. The CPU's PassMark multithread score of 16908 and single-thread score of 2981 indicate balanced performance that won't bottleneck the RTX 5060 in most scenarios.

However, the nearest rival data shows the i5-11400F is essentially tied with the AMD Ryzen 7 5700U (deltaPct 0%) and Intel Core i7-1260P (deltaPct -0.2%) in aggregate benchmarks, meaning it offers no meaningful CPU advantage over these alternatives. For Lockdown Protocol specifically, the 6-core/12-thread configuration is sufficient — the game's FPS scaling from Low to Ultra at any given resolution is driven more by GPU load than CPU constraints, as evidenced by the consistent frame rate drops when settings increase. The CPU's DDR4 memory support with 51.2 GB/s bandwidth is adequate for this game, though it lacks the headroom of newer platforms.

GPU Role

The NVIDIA GeForce RTX 5060 is the dominant performance driver in this pairing, and its Blackwell 2.0 architecture with 3840 shading units and 30 RT cores delivers strong rasterization throughput. The GPU's 8 GB of GDDR7 memory on a 128-bit bus provides 448.0 GB/s of bandwidth, which proves sufficient for 1080p and 1440p but becomes a limiting factor at 4K. The 2497 MHz boost clock and 2280 MHz base clock allow the card to sustain high utilization, as reflected in the PassMark G3D score of 20891 — placing it in the 73rd percentile of all GPUs.

The GPU's performance ceiling in Lockdown Protocol is best illustrated by the Ultra preset results: 95.2 FPS at 1080p, 66.6 FPS at 1440p, and 43.1 FPS at 4K. These numbers show that the RTX 5060 can handle Ultra settings at 1080p and 1440p without issue, but 4K Ultra exceeds its capabilities. The 19.18 TFLOPS FP32 throughput and 299.6 GTexel/s texture rate are adequate for this FPS title, though the 48 ROPs and 120 TMUs are modest for a 50-series card. The nearest rival data shows the RTX 5060 is statistically tied with the AMD Radeon RX 7700 XT (deltaPct 0%) and slightly ahead of the NVIDIA Tesla M60 (deltaPct 0.5%), indicating it competes with upper-mid-range hardware.

At 1080p, the GPU delivers excellent results across all settings, with even Ultra surpassing 95 FPS. The 1440p results remain strong, with High at 91.6 FPS and Medium at 105.7 FPS providing smooth experiences. The 4K data reveals the GPU's VRAM capacity is the likely bottleneck — the 8 GB frame buffer struggles with high-resolution textures, causing the 4K Ultra result to drop to 43.1 FPS. The GPU's 145 W TDP and dual-slot design make it a practical choice for this CPU pairing, though the 1x 8-pin power connector and 300 W suggested PSU should be noted for system builders.

How This Combo Ranks

In the database of tested combinations, this Intel Core i5-11400F + NVIDIA GeForce RTX 5060 pairing ranks 794th out of 1637 combos for Lockdown Protocol, placing it in the 52nd percentile of all tested systems. This mid-pack ranking is somewhat surprising given the individual component percentiles (CPU at 75th, GPU at 73rd), suggesting that Lockdown Protocol's performance profile rewards different hardware characteristics than general-purpose benchmarks.

The ranking indicates that while each component is individually strong, their combination produces results that are merely average compared to other pairings in the database. The i5-11400F's nearest rivals — the Ryzen 7 5700U, Core i7-1260P, and Core Ultra 7 164U — all achieve nearly identical aggregate scores, meaning the CPU position is not a differentiator. Similarly, the RTX 5060's closest competitors (RX 7700 XT, RX 570, Tesla M60) are within 0.6% of its average score, so the GPU choice also fails to provide a competitive edge in the rankings.

The measured FPS data suggests that this combo performs better than its rank implies — at 1080p, it achieves over 125 FPS on High settings and over 200 FPS on Low, which would be considered strong performance in absolute terms. However, the database ranking accounts for all tested combinations, and many pairs likely feature newer processors with higher memory bandwidth or GPUs with larger VRAM pools that handle Lockdown Protocol's 4K demands more effectively. The 794th position out of 1637 represents a solidly middle-of-the-road result — not a standout pairing, but far from a weak one.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset at 2560x1440 delivers the most compelling experience, producing 105.7 FPS average. This configuration provides smooth gameplay while maintaining reasonable graphical fidelity, and the 105.7 FPS result comfortably exceeds the 60 FPS floor for competitive FPS play. At 1920x1080, the High preset at 125.1 FPS is the recommended choice, as it offers a substantial visual upgrade over Medium (145 FPS) while still maintaining frame rates well above 120 FPS for high-refresh-rate monitors.

For players prioritizing maximum frame rates, the Low preset at 1080p achieves 202.1 FPS, which is ideal for esports-style play where responsiveness trumps visuals. At 1440p, Low produces 146.7 FPS, which remains excellent for competitive play. The Ultra preset is only recommended at 1080p, where 95.2 FPS is still playable but shows the largest performance penalty of any 1080p setting — a 47% drop from High. At 4K, the data clearly shows that Ultra (43.1 FPS) is not viable, High (60.5 FPS) is borderline, and even Medium (67.5 FPS) struggles to maintain consistent smoothness. Players with 4K displays should use the Low preset (92.8 FPS) or drop to 1440p for a better experience.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values across settings are: Low at 202.1, Medium at 145, High at 125.1, and Ultra at 95.2. This represents a 52.9% drop from Low to Ultra, with the most significant single-step decline occurring between Medium and High (19.9 FPS, or 13.7% reduction). The 1080p results show that the RTX 5060 has substantial headroom at this resolution, with even the most demanding settings maintaining nearly 100 FPS.

At 2560x1440, the results are: Low at 146.7, Medium at 105.7, High at 91.6, and Ultra at 66.6. The scaling from 1080p to 1440p costs approximately 27-30% of frame rate at each settings level, which is consistent with the 78% increase in pixel count. The 1440p Ultra result of 66.6 FPS is the minimum recommended threshold, while High at 91.6 FPS provides a comfortable margin.

At 3840x2160, the results drop to: Low at 92.8, Medium at 67.5, High at 60.5, and Ultra at 43.1. The transition from 1440p to 4K represents a 37-39% frame rate reduction at each settings level, despite the 2.25x increase in pixel count — this nonlinear scaling indicates that the GPU's memory bandwidth becomes increasingly constrained at higher resolutions. The 4K Ultra result of 43.1 FPS is the only measured configuration below 60 FPS, and it falls 28.8% short of the 4K High result of 60.5 FPS.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Lockdown Protocol?

A: The data shows 2560x1440 provides the best balance, with High settings achieving 91.6 FPS and Medium at 105.7 FPS. At 1920x1080, all settings exceed 95 FPS, but the 1440p results offer superior visual clarity while maintaining smooth frame rates above 90 FPS.

Q: Can this combo handle 4K gaming in Lockdown Protocol?

A: Yes, but with significant compromises. The Low preset at 3840x2160 achieves 92.8 FPS, while High drops to 60.5 FPS. Ultra at 43.1 FPS is not recommended for smooth gameplay. Players wanting 4K should stick to Low or Medium settings.

Q: How does the Intel Core i5-11400F compare to its nearest rivals in CPU benchmarks?

A: The i5-11400F's average benchmark score of 17181 is essentially tied with the AMD Ryzen 7 5700U (17189, deltaPct 0%) and Intel Core i7-1260P (17212, deltaPct -0.2%). It is also within 0.2% of the Intel Core Ultra 7 164U (17215) and Core i5-1240U (17141).

Q: What is the GPU's performance class relative to its competitors?

A: The RTX 5060's average benchmark score of 30109 places it in the 73rd percentile of all GPUs. Its nearest rival is the AMD Radeon RX 7700 XT with a score of 30097 (deltaPct 0%), while it trails the AMD Radeon RX 570 by 0.2% and leads the NVIDIA Tesla M60 by 0.5% and RTX 5070 Mobile by 0.6%.

Q: How much performance is lost when going from Low to Ultra settings at each resolution?

A: At 1080p, Ultra is 106.9 FPS slower than Low (95.2 versus 202.1). At 1440p, the difference is 80.1 FPS (66.6 versus 146.7). At 4K, the gap narrows to 49.7 FPS (43.1 versus 92.8), showing that the GPU becomes the limiting factor at higher resolutions.

Q: Is the 8 GB VRAM sufficient for this game?

A: The measured data suggests yes for 1080p and 1440p, where even Ultra settings maintain playable frame rates. At 4K, the 8 GB capacity likely contributes to the steep performance drops, particularly at Ultra where the 43.1 FPS result indicates memory bandwidth constraints.