Lockdown Protocol

The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 5060 produces a distinctive performance profile in Lockdown Protocol, one that shifts decisively based on resolution and graphics preset. The data shows a system capable of high refresh rates at 1080p but one that becomes increasingly constrained as pixel count rises. This analysis breaks down the measured frame rates, the role of each component, and how the combination stacks up against other tested configurations.

FAQ

Q: What is the best average frame rate achieved by this combo in Lockdown Protocol?

A: The highest measured average frame rate is 198.1 FPS, achieved at 1920x1080 resolution with Low settings. This is the only configuration in the dataset to approach the 200 FPS threshold.

Q: How does the RTX 5060's performance compare to its nearest rival?

A: The RTX 5060 has an average benchmark score of 30109, placing it 0% deltaPct from the AMD Radeon RX 7700 XT, which scores 30097. It also sits 0.6% ahead of the NVIDIA GeForce RTX 5070 Mobile, which scores 29928.

Q: What is the combo's overall ranking among tested configurations?

A: The AMD Ryzen 5 4600G + RTX 5060 combination ranks 820th out of 1637 tested combos in Lockdown Protocol, placing it just below the median of the tested field.

Q: Does the CPU or GPU present a larger bottleneck at 4K?

A: At 3840x2160, the frame rate drops significantly across all settings compared to 1440p, indicating the GPU becomes the primary limiting factor. The CPU's single-thread score of 726 in 3dMark suggests it is less of a constraint at this resolution.

Q: What is the difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset delivers an average of 147.4 FPS, while the Ultra preset delivers 66.4 FPS. This represents a drop of 81 FPS, or roughly 55%, when moving from the lowest to the highest graphical fidelity.

Q: How much VRAM does the GPU have, and what type is it?

A: The NVIDIA GeForce RTX 5060 features 8 GB of GDDR7 memory on a 128-bit bus, providing a memory bandwidth of 448.0 GB/s.

GPU Role

The NVIDIA GeForce RTX 5060 is the dominant component in this pairing, particularly as resolution increases. Its 8 GB of GDDR7 memory and 448.0 GB/s of bandwidth provide the data throughput necessary for high-resolution textures and effects. The GPU's boost clock of 2497 MHz and its 3840 shading units are the primary drivers of frame generation in Lockdown Protocol.

The benchmark results show a clear scaling pattern tied to this GPU's capabilities. At 1080p, the GPU has ample headroom, allowing the CPU to feed frames quickly. However, at 4K, the GPU's workload increases dramatically. The measured data shows that at 3840x2160 with Ultra settings, the average frame rate collapses to 42 FPS. This is not a CPU limitation; the Ryzen 5 4600G's 6 cores and 12 threads are sufficient to prepare frames at this resolution. Instead, the RTX 5060's raw fillrate and pixel processing capabilities become the bottleneck.

The GPU's rasterization performance, as indicated by its passmark_g3d score of 20891, is substantial. Yet, the 4K Ultra result of 42 FPS suggests that the memory bus width of 128-bit, despite the high bandwidth of GDDR7, may struggle to keep up with the data demands of Lockdown Protocol at maximum settings. The gap between Low and Ultra settings at each resolution highlights how the GPU's shading units are taxed differently, with the 19.18 TFLOPS FP32 performance being more than adequate for lower presets but insufficient for the most demanding ones.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, revealing where the system's limits lie. At Low settings, the average frame rate falls from 198.1 FPS at 1920x1080 to 147.4 FPS at 2560x1440, and then to 97.2 FPS at 3840x2160. This represents a 51% reduction from 1080p to 4K.

The pattern is more pronounced at higher settings. With High settings, the average drops from 126.5 FPS at 1080p to 90.1 FPS at 1440p, and finally to 57.6 FPS at 4K. This is a 54% decrease from the lowest to highest resolution. The Ultra preset shows the most severe degradation, falling from 94.7 FPS at 1080p to 66.4 FPS at 1440p, and then to 42 FPS at 4K — a 56% drop.

This scaling behavior is typical of a GPU-bound scenario. The resolution increase from 1080p to 4K quadruples the pixel count, directly impacting the RTX 5060's pixel rate of 119.9 GPixel/s. The fact that the percentage drop is similar across all settings (51-56%) indicates that the resolution itself, not the specific graphical features, is the primary variable limiting performance. At 1080p, the system is likely CPU-bound in some scenarios, as evidenced by the 198.1 FPS Low result, but this constraint disappears as the GPU takes over the workload at higher resolutions.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its peak capability. Low settings produce an average of 198.1 FPS, making it the only configuration in the dataset to exceed 190 FPS. Medium settings deliver 143.5 FPS, High settings provide 126.5 FPS, and Ultra settings still maintain a respectable 94.7 FPS. This resolution shows the most headroom for the RTX 5060, with even the most demanding preset staying above 90 FPS.

Moving to 2560x1440, the frame rates become more moderate. Low settings yield 147.4 FPS, which remains highly playable. Medium settings drop to 105.8 FPS, and High settings settle at 90.1 FPS. Ultra settings at 1440p produce 66.4 FPS, which is still above the 60 FPS threshold but begins to show the GPU's strain. The transition from 1080p to 1440p results in a 26% performance loss on Low settings, but a 30% loss on Ultra settings.

At 3840x2160, the system's limitations become evident. Low settings produce 97.2 FPS, which is still smooth, but Medium settings fall to 67.2 FPS. High settings yield 57.6 FPS, dipping below the 60 FPS standard, and Ultra settings produce just 42 FPS. The data indicates that 4K gaming is only viable on Low settings for this combination, as the RTX 5060's 8 GB VRAM and 128-bit bus are insufficient for higher presets at this resolution.

How This Combo Ranks

The AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5060 combination holds the 820th rank out of 1637 tested combos, placing it in the 50th percentile of all configurations tested in Lockdown Protocol. This mid-pack ranking is consistent with the component's individual performance metrics. The CPU's percentileVsAllCpus is 75, indicating it outperforms 75% of all tested CPUs, while the GPU's percentileVsAllGpus is 73.

The CPU's nearest rivals provide context for its performance. The AMD Ryzen 3 PRO 5355GE scores 17482, a 0% deltaPct from the 4600G's average benchmark score of 17489. The Intel Core i5-12450H scores 17475, just 0.1% behind. This clustering suggests the 4600G's compute capabilities are well-matched to its peers, though its single-thread score of 726 in 3dmark may limit performance in games that rely heavily on single-core performance.

The GPU's ranking is more nuanced. The RTX 5060's average benchmark score of 30109 places it 0% above the AMD Radeon RX 7700 XT and 0.5% above the NVIDIA Tesla M60. However, its passmark_directx_12 score of 77 is notably lower than its directx_11 score of 200, suggesting potential driver or optimization issues in modern APIs that could impact Lockdown Protocol's performance.

Settings Recommendations

For players targeting 1080p, the data supports using High settings. The 126.5 FPS average at High provides a strong balance between visual quality and performance, while Ultra settings at 94.7 FPS still remain viable for those prioritizing fidelity. The difference between Medium and High at 1080p is 17 FPS, a smaller gap than the 47 FPS difference between Low and Medium, indicating diminishing returns at lower presets.

At 1440p, High settings are the recommended choice. The 90.1 FPS average is comfortable for competitive play, and the drop to 66.4 FPS at Ultra is significant enough to impact smoothness. Players seeking maximum frame rates can use Low settings to achieve 147.4 FPS, but this comes at a substantial visual cost.

For 4K, the data suggests limiting settings to Low. The 97.2 FPS average at Low is the only preset at this resolution that maintains a high refresh rate. Medium settings at 67.2 FPS are playable but may exhibit stutter on high-refresh displays, while High and Ultra settings at 57.6 FPS and 42 FPS respectively are not recommended for smooth gameplay. The 4K Ultra result of 42 FPS is particularly notable, as it indicates the RTX 5060's 8 GB VRAM capacity is likely exceeded at this configuration, causing the significant performance drop.