Inside

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 5070 Ti delivers exceptional performance in Inside, a 2016 puzzle platformer that is far more demanding on the GPU than the CPU at high resolutions. The measured data shows that this combination produces incredibly high frame rates across all tested settings, with the lowest average FPS recorded at 119.7 at 4K Ultra, indicating that the system never struggles to maintain smooth gameplay. This pairing ranks 50th out of 1671 tested combos, placing it in the top 3% of all configurations in our database for this specific title.

Resolution Scaling

The frame rate data reveals a classic GPU-bound scaling pattern as resolution increases. At 1080p with Low settings, the system achieves an average of 416.3 FPS, which drops to 375.2 FPS at 1440p (a 10% decrease) and further to 253.6 FPS at 4K (a 39% decrease from 1080p). This substantial drop from 1440p to 4K indicates that the RTX 5070 Ti’s rendering pipeline becomes the primary limiting factor at higher pixel counts, rather than the CPU.

The scaling behavior changes notably when moving to higher quality presets. At Ultra settings, the frame rate goes from 269.8 FPS at 1080p to 192.2 FPS at 1440p (a 29% reduction), and then to 119.7 FPS at 4K (a 56% reduction from 1080p). The more pronounced drop at Ultra settings suggests that the additional graphical effects and shading complexity amplify the GPU workload disproportionately at higher resolutions, confirming that the RTX 5070 Ti is the bottleneck in this configuration.

Interestingly, the gap between Medium and High settings remains relatively consistent across resolutions, with High settings delivering approximately 28% fewer frames than Medium at 1080p (279.2 vs 388.8 FPS) and about 39% fewer at 4K (126.5 vs 206.2 FPS). This widening gap at 4K indicates that the GPU’s memory bandwidth and compute resources become increasingly strained as resolution and settings complexity both increase, making the RTX 5070 Ti’s 896.0 GB/s bandwidth and 43.94 TFLOPS FP32 performance critical factors in maintaining high frame rates.

FAQ

*Q: What is the highest average frame rate achieved by this combo in Inside?*

A: The highest measured average FPS is 416.3, achieved at 1920x1080 resolution with Low settings. This indicates the system has massive headroom for competitive play or high-refresh-rate displays at lower resolutions.

Q: How does the RTX 5070 Ti compare to its closest rival, the RTX 4080?

A: The RTX 5070 Ti has an average benchmark score of 52086, which is virtually identical to the RTX 4080’s score of 52085, showing a deltaPct of 0%. This means the two GPUs perform at parity in synthetic benchmarks, suggesting similar real-world capabilities in Inside.

Q: Is the Ryzen 5 9600X a bottleneck at 4K resolution?

A: No, the data indicates the GPU is the limiting factor at 4K. The frame rate drops from 253.6 FPS at Low settings to 119.7 FPS at Ultra settings, a 53% reduction that aligns with the increased GPU workload, while the CPU’s single-thread performance (scoring 3603 in Cinebench R23) remains more than sufficient for this title.

Q: What is the difference in performance between Medium and High settings at 1440p?

A: At 2560x1440, Medium settings produce an average of 324.1 FPS while High settings produce 199.7 FPS, representing a 38% performance penalty for the higher quality preset. This suggests that High settings add significant visual complexity that impacts the GPU’s fill rate and shading throughput.

*Q: How does this combo rank among all tested configurations in Inside?*

A: This CPU-GPU pairing ranks 50th out of 1671 tested combos, placing it in the top 3% of all configurations. This high ranking reflects the balanced nature of the Ryzen 5 9600X and RTX 5070 Ti, with neither component severely limiting the other’s performance in this game.

Q: Can this system maintain 120+ FPS at 4K with maximum quality settings?

A: Yes, at 4K Ultra settings the combo achieves an average of 119.7 FPS, which is just below the 120 FPS threshold but still extremely smooth. For a guaranteed 120+ FPS experience at 4K, users would need to drop to High settings, which yields 126.5 FPS.

GPU Role

The NVIDIA GeForce RTX 5070 Ti plays a dominant role in determining Inside’s performance, particularly at higher resolutions and quality presets. The GPU features 16 GB of GDDR7 memory on a 256-bit bus, providing 896.0 GB/s of bandwidth, which is essential for handling the game’s detailed environments and particle effects at 4K resolution. The memory clock runs at 1750 MHz (28 Gbps effective), and the boost clock of 2452 MHz ensures consistent high-frequency operation during demanding scenes.

The GPU’s compute capabilities are substantial, with 8960 shading units and 280 texture mapping units, enabling it to process the game’s lighting and shadow effects efficiently. The 96 ROPs deliver a pixel rate of 235.4 GPixel/s, which directly impacts fill-rate-limited scenarios such as the ones observed when transitioning from Medium to High settings. The data shows that at 4K, the GPU is the clear limiting factor: the frame rate scales from 253.6 FPS at Low to 206.2 FPS at Medium (a 19% drop), then to 126.5 FPS at High (a 39% drop from Medium), and finally to 119.7 FPS at Ultra (a 5% drop from High). This pattern indicates that the High preset introduces effects that heavily tax the GPU’s shading units and texture units, while the Ultra preset adds only marginal additional load.

The RTX 5070 Ti’s 43.94 TFLOPS FP32 performance and 686.6 GTexel/s texture rate are more than adequate for Inside’s requirements, as evidenced by the fact that even at 4K Ultra, the system never drops below 119.7 FPS. However, the GPU’s performance relative to its rivals is notable: it matches the RTX 4080 exactly (deltaPct 0%) but trails the AMD Radeon RX 7700S by 0.8% and the AMD Radeon Pro W6600M by 2.5% in average benchmark scores, though these differences are unlikely to be perceptible in actual gameplay given the high frame rates measured.

How This Combo Ranks

The AMD Ryzen 5 9600X and NVIDIA GeForce RTX 5070 Ti combination ranks 50th out of 1671 tested combos in Inside, placing it in the top 3% of all configurations. This exceptional ranking is driven by the synergy between the CPU’s strong single-thread performance and the GPU’s raw rendering power. The Ryzen 5 9600X, based on the Zen 5 architecture on a 4 nm process, delivers a Cinebench R23 single-core score of 3603 and a multi-core score of 25525, placing it in the 85th percentile of all CPUs. Its nearest rival, the Intel Core i5-13490F, scores 28173 on average, a deltaPct of just 0.3% ahead, indicating near-identical CPU performance.

On the GPU side, the RTX 5070 Ti sits in the 87th percentile of all GPUs, with an average benchmark score of 52086. Its closest competitor, the RTX 4080, scores 52085, showing perfect parity (deltaPct 0%), while the AMD Radeon RX 7700S scores 52505 (0.8% ahead) and the NVIDIA RTX A1000 scores 50826 (2.5% behind). This tight clustering means that in Inside, the RTX 5070 Ti’s performance is essentially interchangeable with the RTX 4080, and the 50th overall rank reflects that both components are well-matched for this game’s demands.

The rank of 50 out of 1671 is particularly impressive given that Inside is a lightweight title by modern standards. The fact that this combo achieves over 400 FPS at 1080p Low and still maintains 119.7 FPS at 4K Ultra demonstrates that neither component introduces a meaningful bottleneck. The CPU’s 6 cores and 12 threads with a boost clock of 5.40 GHz ensure that even the most demanding physics or logic sequences in the game are handled without issue, while the GPU’s 16 GB of VRAM provides ample headroom for future titles or higher-resolution textures.

Settings Recommendations

Based on the measured frame rate data, the optimal settings depend on the user’s display refresh rate and resolution preference. For 4K displays, the High preset at 3840x2160 delivers an average of 126.5 FPS, which is the best balance of visual quality and performance for 120 Hz displays. The Ultra preset at 4K drops to 119.7 FPS, which is only 5% slower but may not be worth the marginal visual improvement for those seeking a locked 120 FPS experience. The Medium preset at 4K provides 206.2 FPS, which is ideal for 144 Hz or 165 Hz displays, offering a 63% performance uplift over High while still maintaining solid visual fidelity.

For 1440p displays, the High preset at 2560x1440 produces 199.7 FPS, making it suitable for 165 Hz and 240 Hz monitors. The Medium preset at 1440p yields 324.1 FPS, which is excellent for 300 Hz or 360 Hz displays and represents a 62% improvement over High. The Ultra preset at 1440p delivers 192.2 FPS, which is still highly playable and offers the maximum visual quality for users with 144 Hz or 165 Hz panels who prioritize image fidelity over raw frame rates.

At 1080p, all settings produce frame rates above 269 FPS, meaning even the Ultra preset at 269.8 FPS is suitable for 240 Hz displays. The Low preset at 1080p achieves 416.3 FPS, which is only meaningful for esports-level 360 Hz or 500 Hz monitors. Given that Inside is a puzzle platformer rather than a competitive shooter, the recommendation is to prioritize visual quality: for most users, the High preset at 1440p or 4K offers the best experience, as it provides a substantial improvement over Medium while maintaining frame rates well above 120 FPS. The Ultra preset is recommended only for users with GSync or FreeSync displays who want maximum visual fidelity without concern for the 119.7 FPS minimum at 4K.