Inside
This combination delivers exceptional performance with an average of 137 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 59 | 62 | 99 | 124 |
| 1440p QHD | 94 | 99 | 158 | 198 |
| 1080p Full HD | 131 | 137 | 220 | 257 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Inside with AMD Ryzen 5 5600F + AMD Radeon RX 5700 XT, In-Depth Analysis
The AMD Ryzen 5 5600F and AMD Radeon RX 5700 XT combination delivers a highly playable experience in Inside, with performance scaling predictably across resolutions. At 4K High settings, the combo averages 62 FPS, which is fluid for a puzzle platformer, but the data reveals that the GPU becomes the primary constraint as resolution climbs. The most significant finding is the performance cliff between Low and Ultra settings at 4K, where average frame rates drop from 124 FPS to 59 FPS, indicating that the graphics card is heavily taxed by the highest quality presets at this resolution.
Resolution Scaling
The measured FPS data shows a clear and consistent pattern of scaling from 1080p to 4K, with the most dramatic shifts occurring at the Low preset. At 1920x1080, the combo achieves 257 FPS on Low, which is more than double the 124 FPS recorded at 3840x2160 on the same settings. This represents a 51.7% reduction in performance when moving from 1080p to 4K at Low, which is a substantial hit that points directly to the GPU's rendering limits at higher pixel counts. The Medium preset shows a slightly less severe but still pronounced drop, going from 220 FPS at 1080p to 158 FPS at 1440p and then down to 99 FPS at 4K.
The High preset follows a similar trajectory, with 137 FPS at 1080p, 99 FPS at 1440p, and 62 FPS at 4K. The Ultra preset is the most demanding, with 131 FPS at 1080p, 94 FPS at 1440p, and only 59 FPS at 4K. Notably, the gap between High and Ultra is relatively narrow at each resolution, with a difference of just 6 FPS at 1080p (137 vs 131) and only 3 FPS at 4K (62 vs 59). This suggests that the Ultra preset offers marginal visual gains over High for a measurable performance cost, and that the GPU is already near its ceiling at 4K with either setting. The Low-to-Medium jump is larger, with a 37 FPS difference at 1080p (257 vs 220) and a 25 FPS difference at 4K (124 vs 99), indicating that Medium provides a significant visual upgrade for a moderate performance penalty.
The data strongly indicates that the RX 5700 XT is the limiting component at 4K, as the frame rate drops are consistent with a GPU-bound scenario. The Ryzen 5 5600F, with its 6 cores and 12 threads, is unlikely to bottleneck at these frame rates, particularly given that the CPU's PassMark single-thread score is 2872 and its multithread score is 19236. At 1080p, the combo reaches 257 FPS on Low, which is well beyond what most displays can show, confirming that the CPU can feed the GPU effectively at lower resolutions. The scaling behavior suggests that users targeting 4K should stick to Medium or High presets to maintain 60+ FPS, while 1080p and 1440p users have headroom to push Ultra settings.
CPU Role
The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, and built on a 7 nm process from TSMC. Its base clock is 3.00 GHz with a boost clock of 4.00 GHz, and it has a 65 W TDP. In the context of Inside, a 2D puzzle platformer, the CPU's role is less demanding than in 3D titles, but the data still shows its capability. The PassMark single-thread score of 2872 and multithread score of 19236 place this processor in the 85th percentile of all CPUs, meaning it outperforms the vast majority of installed processors. Its nearest rivals include the Intel Core Ultra 5 225 with an average score of 36938 (0% delta) and the AMD Ryzen 5 5500X3D with an average score of 37018 (-0.2% delta), showing that the 5600F is essentially on par with these modern alternatives.
The CPU's cache configuration includes 64 KB of L1 per core, 512 KB of L2 per core, and a shared 32 MB L3 cache, which is ample for a game like Inside that does not require massive data throughput. The dual-channel DDR4 memory support with 51.2 GB/s bandwidth is sufficient for this workload. The fact that the combo reaches 257 FPS at 1080p Low suggests that the CPU is not a bottleneck at lower resolutions, where the GPU has less pixel work to do. Even at 4K, the CPU should be able to keep up with the GPU's output, as the frame rates are capped by the graphics card's fill rate and shading capacity.
The PassMark physics score of 1043 and floating-point math score of 34548 indicate that the CPU can handle the simple physics calculations required by Inside without issue. The data compression score of 232836 and encryption score of 13839 are not directly relevant to gaming but show the processor's general compute strength. Overall, the CPU role in this combo is to provide enough single-thread headroom to avoid limiting the GPU, and the benchmark results confirm that it does so effectively. The 5600F's performance is well-matched to the RX 5700 XT, as neither component appears to be a significant drag on the other across the tested resolutions.
How This Combo Ranks
The combination of the AMD Ryzen 5 5600F and AMD Radeon RX 5700 XT ranks 2134 out of 2887 tested combos in Inside. This places it in the 26th percentile of all tested combinations, meaning that roughly 74% of other CPU-GPU pairs deliver higher average frame rates in this game. This ranking is notably low, which is surprising given the playable frame rates observed. The explanation lies in the nature of the benchmark dataset, which likely includes many high-end and modern components that outperform this mid-range pairing. However, the ranking should be interpreted with caution because Inside is a lightweight title, and many combos may achieve hundreds of FPS, skewing the distribution upward.
The combo's rank reflects the GPU's position in the broader market. The RX 5700 XT sits in the 59th percentile of all GPUs, with an average benchmark score of 16361. Its nearest rivals include the AMD Radeon Pro 5600M (16351, +0.1% delta) and the NVIDIA RTX PRO 6000 Blackwell (16408, -0.3% delta), which are professional or workstation cards. This indicates that the RX 5700 XT is a solid mid-range performer but not a top-tier part. The CPU, on the other hand, ranks higher at the 85th percentile, which suggests that the GPU is the limiting factor in the combo's overall ranking. If paired with a stronger GPU, the 5600F could likely push this combo higher in the rankings, but as configured, it is held back by the RX 5700 XT's pixel throughput.
In practical terms, the rank of 2134 out of 2887 means that while the combo is not competitive with high-end rigs, it still delivers a smooth experience for Inside at all tested resolutions and presets, with the lowest average being 59 FPS at 4K Ultra. The ranking is a relative measure, and the absolute frame rates are what matter for playability. For a game like Inside, which is a slow-paced puzzle platformer, 59 FPS is perfectly acceptable, and the combo's rank should not be seen as a deterrent. The data shows that the combo is capable of running the game at 4K with playable frame rates, which is a positive outcome for a GPU released in 2019.
FAQ
Q: What is the highest average FPS achieved by this combo at 1080p?
A: At 1920x1080 with Low settings, the combo achieves an average of 257 FPS, which is the highest recorded across all tested settings and resolutions.
Q: How does the combo perform at 4K Ultra settings?
A: At 3840x2160 with Ultra settings, the combo delivers an average of 59 FPS, which is the lowest average recorded but still playable for a puzzle platformer.
Q: Is the CPU or GPU more likely to be the bottleneck at 4K?
A: The data indicates the GPU is the primary constraint at 4K, as frame rates drop significantly from 124 FPS on Low to 59 FPS on Ultra, while the CPU's performance metrics suggest it can handle these workloads.
Q: What is the difference in average FPS between High and Ultra at 1440p?
A: At 2560x1440, the High preset averages 99 FPS, while Ultra averages 94 FPS, a difference of just 5 FPS.
Q: Does the combo maintain 60+ FPS at 4K on any preset?
A: Yes, at 4K Low the combo averages 124 FPS, and at 4K Medium it averages 99 FPS, both well above 60 FPS. High settings also exceed 60 FPS with an average of 62 FPS.
Q: How does the CPU's single-thread performance compare to its rivals?
A: The Ryzen 5 5600F has a PassMark single-thread score of 2872, and its nearest rivals, such as the Intel Core Ultra 5 225 and AMD Ryzen 5 5500X3D, have average benchmark scores that are within 0.5% of its own, indicating near-parity.
GPU Role
The AMD Radeon RX 5700 XT is built on the RDNA 1.0 architecture with the Navi 10 chip, manufactured on a 7 nm process from TSMC. It has 2560 shading units, 160 texture mapping units, and 64 render output units, with a base clock of 1605 MHz and a boost clock of 1905 MHz. The memory subsystem consists of 8 GB of GDDR6 on a 256-bit bus, delivering 448.0 GB/s of bandwidth. These specifications position the GPU as a capable 1440p performer, but the data shows its limits at 4K. The GPU's average benchmark score is 16361, placing it in the 59th percentile of all GPUs, with its nearest rivals being the AMD Radeon Pro 5600M (16351, +0.1% delta) and the NVIDIA RTX PRO 6000 Blackwell (16408, -0.3% delta).
The 8 GB of VRAM is sufficient for Inside, which is not a VRAM-intensive title, and the 448.0 GB/s bandwidth ensures smooth texture streaming. The GPU's FP32 performance of 9.754 TFLOPS and pixel rate of 121.9 GPixel/s are adequate for the game's 2D rendering requirements. The PassMark DirectX 12 score of 64 and DirectX 11 score of 116 show that the GPU handles modern APIs well, though the game's simple graphics do not stress the architecture heavily. The data shows that the GPU is the limiting factor at 4K, as evidenced by the 65 FPS drop from Low (124 FPS) to Ultra (59 FPS) at that resolution. This is a clear indication that the GPU's shading throughput and memory bandwidth are being saturated at higher quality presets.
At 1080p, the GPU has more headroom, with the Low preset hitting 257 FPS and the Ultra preset still delivering 131 FPS. The scaling from 1080p to 4K at Medium settings shows a 55% performance loss (220 to 99 FPS), which is consistent with a GPU-bound scenario. The GPU's 7 nm process and RDNA 1.0 architecture are efficient, but they are outclassed by newer parts. The 225 W TDP and dual-slot design are reasonable for the performance delivered. Overall, the GPU role is to provide solid 1080p and 1440p performance, with 4K possible only at lower presets or with a willingness to accept frame rates just above 60 FPS.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend on the target resolution. For 1080p displays, the Ultra preset is recommended, as it delivers an average of 131 FPS, which is well above the 60 FPS threshold and provides the best visual quality. The High preset at 137 FPS is only 6 FPS faster, so the visual gains from Ultra are worth the minor performance trade-off. For 1440p, the High preset at 99 FPS is the best choice, as it offers a smooth experience while the Ultra preset drops to 94 FPS, a negligible difference. Pushing to Medium at 158 FPS is unnecessary for a game like Inside, which does not require high refresh rates to be enjoyable.
For 4K, the Medium preset at 99 FPS is the clear recommendation, as it provides a significant visual upgrade over Low (124 FPS) while maintaining a comfortable margin above 60 FPS. The High preset at 62 FPS is also viable, but it is close to the 60 FPS line and may dip below in busy scenes, making Medium the safer choice. The Ultra preset at 59 FPS is just below 60 FPS and is not recommended for 4K, as the visual difference between Ultra and High is minimal based on the 3 FPS gap at this resolution. The Low preset, while fast, sacrifices too much visual fidelity for a puzzle platformer where atmosphere and lighting are important.
The data shows that the combo is best utilized at 1080p or 1440p, where it can run High or Ultra presets with ease. At 4K, users should prioritize Medium settings to ensure a consistent frame rate, as the GPU's 8 GB of VRAM and 448.0 GB/s bandwidth are sufficient for this preset. The min FPS values recorded for Medium at all resolutions (84 FPS at 4K, 134 FPS at 1440p, and 187 FPS at 1080p) indicate that frame pacing is stable, with no severe drops. These recommendations are based on the measured rows and aim to balance visual quality with performance, ensuring that the game remains fluid throughout.
Hardware Specifications
AMD Ryzen 5 5600F
AMD Radeon RX 5700 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600F + AMD Radeon RX 5700 XT in Inside
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 124.0 |
| 3840x2160 | Medium | 99.0 |
| 3840x2160 | High | 62.0 |
| 3840x2160 | Ultra | 59.0 |
| 2560x1440 | Low | 198.0 |
| 2560x1440 | Medium | 158.0 |
| 2560x1440 | High | 99.0 |
| 2560x1440 | Ultra | 94.0 |
| 1920x1080 | Low | 257.0 |
| 1920x1080 | Medium | 220.0 |
| 1920x1080 | High | 137.0 |
| 1920x1080 | Ultra | 131.0 |
Inside with Ryzen 5 5600F + Other GPUs
See how Inside performs with the same CPU but different graphics cards.
Inside with RX 5700 XT + Other CPUs
See how Inside performs with the same GPU but different processors.
Other Games with Ryzen 5 5600F + RX 5700 XT
Explore FPS benchmarks for other games using this same hardware combination.