Hitman 2

The RTX 5060 paired with the Ryzen 5 5600G in Hitman 2 delivers a broad performance envelope that scales predictably with resolution and settings. The data shows a clear transition from CPU-bound territory at 1080p to a GPU-limited scenario at 4K, with the middle ground at 1440p offering the best balance of fidelity and frame rate. This combination lands in the 51st percentile of all tested combos, placing it firmly in the mid-pack for this title.

Resolution Scaling

The measured frames per second reveal how the workload shifts as pixel count increases. At 1080p with Low settings, the combo achieves 179.7 FPS, which drops to 102.4 FPS at High and 73.7 FPS at Ultra. This scaling pattern—a 41% reduction from Low to Ultra at 1080p—indicates that the GPU is not the primary constraint at this resolution; the processor is feeding frames faster than the graphics card can render them, but the headroom is modest. Moving to 1440p, the same settings tier shows 119 FPS at Low, 86.8 FPS at Medium, 66.2 FPS at High, and 47.9 FPS at Ultra. The gap between Low and Ultra narrows to 60% at 1440p, suggesting the GPU begins to assert its influence, yet the CPU still contributes meaningfully to the ceiling.

The most telling shift occurs at 4K. At 3840x2160, Low settings yield 59.9 FPS, Medium drops to 44.9 FPS, High falls to 35 FPS, and Ultra bottoms out at 26.3 FPS. The delta from Low to Ultra at 4K is 56%, which is proportionally larger than at 1440p, indicating the GPU is now the dominant limiting factor. The RTX 5060’s 8 GB of GDDR7 memory and 128-bit bus become the bottleneck, as the sheer pixel throughput at 4K overwhelms the card’s 19.18 TFLOPS of FP32 compute. The 35 FPS average at 4K High is below the 60 FPS target, while the 59.9 FPS at 4K Low is just at the threshold, showing that 4K gaming is only viable at the lowest fidelity preset.

The scaling behavior suggests that 1440p is the sweet spot for this pairing. The 66.2 FPS at High settings clears the 60 FPS standard, and even Ultra at 47.9 FPS is playable if frame rate is prioritized less than visual quality. The drop from 1080p to 1440p at High settings is 35%, which is less severe than the 47% drop from 1440p to 4K at the same preset, confirming that the GPU’s headroom is exhausted quickly as resolution climbs.

CPU Role

The Ryzen 5 5600G brings six cores and 12 threads based on the Zen 3 architecture, clocked at 3.90 GHz base and 4.40 GHz boost. Its 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are sufficient for Hitman 2’s engine, which is known for moderate thread scaling. The CPU’s benchmark results reinforce its capability: a Cinebench R23 multi-core score of 16758 and a single-core score of 2365 place it in the 78th percentile of all CPUs, with an average benchmark score of 19983. This places it within 0.3% of the AMD Ryzen Threadripper PRO 5995WX and 0.2% of the Intel Core i7-11600H, though those rivals are not directly comparable in core count or purpose.

In the context of Hitman 2, the 5600G’s single-thread performance is the more relevant metric. The game’s AI and physics routines are largely serial, and the 2365 single-core score in Cinebench R23 suggests ample headroom for the CPU to feed the RTX 5060 at 1080p. The data supports this: at 1080p Low, the 179.7 FPS result is likely near the CPU’s frame generation limit, as the GPU is not saturated at such a low fidelity preset. The 3dmark single-thread score of 872 and 2-thread score of 1705 further indicate that the CPU can sustain high instruction throughput without stalling. However, the 5600G’s PCIe Gen 3 interface, rather than Gen 4 or 5, may slightly limit data transfer to the GPU, though the 448.0 GB/s memory bandwidth of the RTX 5060 mitigates this in practice.

The CPU’s integrated Radeon Vega 7 graphics are irrelevant here since the discrete GPU is present, but the 65 W TDP and 7 nm process node mean the 5600G runs efficiently, leaving thermal headroom for sustained boosts. The 16 MB L3 cache is modest by modern standards, but Hitman 2’s level streaming benefits from the 10,700 million transistors and 180 mm² die size, which contribute to the 16758 multi-core score. The data shows that the 5600G does not bottleneck the RTX 5060 at 4K, where the GPU is clearly the limiting factor, but at 1080p Low, the CPU’s 6-core/12-thread configuration caps performance, as evidenced by the 179.7 FPS ceiling.

Settings Recommendations

The measured rows provide a clear hierarchy for optimal play. At 1080p, the Ultra preset at 73.7 FPS is the best experience, as it exceeds the 60 FPS threshold while delivering the highest visual fidelity. The High preset at 102.4 FPS offers a 39% frame rate uplift over Ultra, which may be preferable for competitive play, but the visual degradation is noticeable in a stealth game where lighting and shadows matter. Medium at 139.2 FPS and Low at 179.7 FPS are excessive for the genre, offering no practical benefit unless the display has a high refresh rate beyond 144 Hz.

At 1440p, the High preset at 66.2 FPS is the recommended choice, as it maintains smooth gameplay while preserving detail. Ultra at 47.9 FPS is below the 60 FPS target, and the drop from High to Ultra is 28%, which is too steep for the visual gains. Medium at 86.8 FPS is a viable alternative for those who prioritize frame rate, but High offers a better balance of image quality and performance. Low at 119 FPS is unnecessary, as the game’s stealth mechanics require visual clarity to spot enemies, which Low settings compromise.

At 4K, the situation is more constrained. The Low preset at 59.9 FPS is the only playable option, and even it is marginal. Medium at 44.9 FPS and High at 35 FPS are sub-30 FPS in demanding scenes, making them unsuitable for a game that requires precise timing. Ultra at 26.3 FPS is effectively unplayable. The data suggests that 4K should be avoided unless the user is willing to accept Low settings, and even then, the frame rate is inconsistent. For the best experience, 1440p High is the sweet spot, offering 66.2 FPS with a balance of performance and fidelity that neither 1080p nor 4K can match.

How This Combo Ranks

The combo’s rank of 910 out of 1795 tested combinations places it in the 51st percentile, meaning it outperforms just over half of all tested systems. This is a middle-of-the-pack result, reflecting the balance between the 5600G’s strong CPU performance and the RTX 5060’s mid-range GPU capability. The CPU’s 78th percentile ranking among all processors is offset by the GPU’s 73rd percentile, and the combination lands in a narrower band. The nearest GPU rivals illustrate this: the RTX 5060’s average score of 30109 is within 0.2% of the AMD Radeon RX 570 and 0.6% of the NVIDIA GeForce RTX 5070 Mobile, showing that the desktop card is competitive with both older and portable parts.

The 910th rank suggests that Hitman 2 is not particularly demanding on this hardware, but also that the combo does not leverage any special optimizations. The 5600G’s 16 MB L3 cache and 12 threads are adequate, but a higher-core CPU or a GPU with more memory bandwidth would likely push the rank higher. The 4K results, where the GPU is the bottleneck, likely drag the rank down, as many competing combos with more powerful GPUs achieve higher frame rates at that resolution. Conversely, the 1080p results, where the CPU is the limiter, are competitive with systems that pair the 5600G with faster GPUs, but the RTX 5060’s mid-range positioning prevents the combo from breaking into the top quartile.

The data indicates that this combo is well-suited for 1080p and 1440p gaming, but the 4K performance caps its overall ranking. The 59.9 FPS at 4K Low is a passable result, but competitors with higher GPU scores, such as the AMD Radeon RX 7700 XT (which matches the RTX 5060’s average score within 0.0%), may offer similar or better 4K performance, depending on their memory configurations. The rank of 910 is not a poor showing, but it is not a standout either, reflecting the hardware’s balanced but unremarkable profile.

FAQ

Q: What frame rate can this combo achieve at 1080p with High settings?

A: The measured average FPS at 1920x1080 with High settings is 102.4 FPS, which is well above the 60 FPS target and suitable for smooth gameplay.

Q: Is 4K gaming viable with the Ryzen 5 5600G and RTX 5060?

A: At 3840x2160, only the Low preset reaches near-playable levels at 59.9 FPS. The High preset drops to 35 FPS, and Ultra falls to 26.3 FPS, making 4K impractical for immersive play.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The 5600G’s average benchmark score of 19983 is 0.2% higher than the Intel Core i7-11600H and 0.3% higher than the AMD Ryzen Threadripper PRO 5995WX, while being 0.2% lower than the Intel Core i7-11800H.

Q: What is the best resolution and settings combination for this system?

A: The data shows 1440p with High settings at 66.2 FPS offers the best balance, as it exceeds 60 FPS while maintaining visual quality, unlike 4K which requires Low settings.

Q: Does the CPU bottleneck the GPU at any resolution?

A: At 1080p Low, the 179.7 FPS result suggests the CPU is the limiting factor, as the GPU is not fully utilized at that low a preset. At 4K, the GPU is clearly the bottleneck, with frame rates dropping to 26.3 FPS at Ultra.

Q: How does this combo rank among all tested configurations in Hitman 2?

A: It ranks 910th out of 1795 combos, placing it in the 51st percentile, which is slightly above the median but not a top-tier result.