Hitman 2

The AMD Ryzen 5 5600 paired with the Intel Arc B570 produces a highly resolution-sensitive experience in Hitman 2, with performance scaling that clearly identifies the GPU as the primary constraint at higher settings. The measured data shows a steep decline in frame rates as resolution increases, particularly when moving from 1440p to 4K. At 1080p High, the combo delivers 70 FPS, but at 1440p High this falls to 45 FPS, and at 4K High it drops to just 24 FPS. This represents a 66% reduction in average frame rate from 1080p to 4K at High settings, highlighting that the Arc B570’s rendering throughput is the limiting factor in this title. The pattern is consistent across all settings presets, with the gap between 1080p and 4K widening as graphical load increases.

Resolution Scaling

The resolution scaling data reveals a classic GPU-bound scenario for this combination. At Low settings, the combo achieves 123 FPS at 1080p, which drops to 79 FPS at 1440p and 42 FPS at 4K. The transition from 1080p to 1440p costs 44 FPS (a 36% drop), while moving from 1440p to 4K costs an additional 37 FPS (a 47% drop). This non-linear decline indicates that the Intel Arc B570’s memory bandwidth and pixel throughput are being progressively saturated as pixel count increases. The GPU’s 380.0 GB/s bandwidth and 10 GB of GDDR6 memory are sufficient for 1080p but become strained at 4K, where the 160-bit bus width limits effective memory transfer rates.

At Medium settings, the scaling pattern is similar but with slightly smaller absolute drops. The combo produces 93 FPS at 1080p, 59 FPS at 1440p, and 32 FPS at 4K. The 1440p to 4K transition here only costs 27 FPS, suggesting that the Medium preset’s reduced texture detail and shadow complexity partially alleviate memory pressure. However, the 4K Medium result of 32 FPS remains below the 40 FPS threshold typically considered playable, confirming that 4K is only viable at Low settings for this pairing.

The Ultra preset exhibits the most dramatic scaling penalty. At 1080p Ultra, the combo manages 52 FPS, but this falls to 33 FPS at 1440p and a marginal 18 FPS at 4K. The 4K Ultra result is essentially unplayable, representing a 65% drop from the 1080p Ultra figure. This indicates that Hitman 2’s Ultra settings include effects that disproportionately impact the Arc B570’s Xe2-HPG architecture, likely related to its 18 ray tracing cores and 80 ROPs, which are underpowered for 4K workloads at this tier.

The data strongly suggests that the Ryzen 5 5600 is not the bottleneck at any resolution above 1080p. The CPU’s 6 cores and 12 threads, based on Zen 3 architecture, provide ample processing headroom for Hitman 2’s stealth AI and physics systems. Even at 1080p Low, where the CPU would be most likely to limit performance, the 123 FPS result indicates the processor is keeping pace with the GPU’s output. The scaling pattern across resolutions is nearly linear in terms of pixel count, which is a hallmark of GPU-bound rendering.

CPU Role

The AMD Ryzen 5 5600 plays a supporting role in this configuration, providing consistent frame delivery without becoming the limiting factor. This 5000-series processor features 6 cores and 12 threads, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. Its Zen 3 architecture, codenamed Vermeer, is built on a 7 nm process from TSMC, offering 32 MB of shared L3 cache. For Hitman 2, which is not heavily multithreaded, the CPU’s single-thread performance is more relevant than its multi-core capabilities.

The CPU’s benchmark scores contextualize its gaming performance. In Cinebench R23, the 5600 scores 2584 in single-core and 18309 in multi-core. These figures place it in the 74th percentile of all CPUs, with an average benchmark score of 20468. Compared to its nearest rivals, the processor is essentially tied with the Intel Core Ultra 7 258V (0.1% faster), AMD Ryzen 5 8500G (0.2% slower), AMD EPYC 9454P (0.2% slower), and AMD EPYC 7713 (0.5% slower). This tight grouping means the 5600 offers competitive computational performance for its class, though the EPYC parts are workstation-oriented.

In Hitman 2, the CPU’s role is to handle game logic, NPC AI, and physics calculations. The measured FPS data shows that even at 1080p Low with 123 FPS, the CPU is not preventing the GPU from reaching high frame rates. The 3DMark scores reinforce this: 882 in single-thread, 1737 in 2-thread, 3313 in 4-thread, 4798 in 8-thread, and 5659 in max-thread tests. The scaling from 2 to 4 threads suggests the game can utilize multiple cores, but the incremental gains beyond 8 threads are minimal, indicating Hitman 2 does not heavily exploit the 5600’s 12-thread capability.

The CPU’s memory support for DDR4 with dual-channel configuration and 51.2 GB/s bandwidth is adequate for the Arc B570’s PCIe 4.0 x8 interface. The 20 PCIe Gen 4 lanes provide sufficient bandwidth for GPU communication, though the x8 link is narrower than the x16 used by some rivals. This does not appear to impact Hitman 2 performance based on the measured results, which show consistent frame rates across resolutions. The CPU’s 65W TDP and unlocked multiplier make it an efficient choice, though these characteristics do not directly influence game performance.

GPU Role

The Intel Arc B570 is the definitive performance driver in this Hitman 2 configuration. This Battlemage-generation GPU, based on the Xe2-HPG architecture, operates at a fixed 2500 MHz clock for both base and boost. Its 2304 shading units, 144 texture mapping units, and 80 ROPs deliver a theoretical 11.52 TFLOPS of FP32 performance. The GPU’s 10 GB of GDDR6 memory on a 160-bit bus provides 380.0 GB/s of bandwidth, which is a key factor in the resolution scaling observed.

The GPU’s benchmark scores place it in the 65th percentile of all GPUs, with an average score of 20556. Its nearest rivals are closely matched: the NVIDIA GeForce RTX 3070 Mobile is 0.1% faster, the Intel Arc A750 is 0.1% slower, the NVIDIA Quadro M4000M is 0.4% faster, and the AMD Radeon R9 M390X is 0.5% slower. This indicates the B570 sits at a performance tier where small architectural differences can shift results. In Hitman 2, the GPU’s 80 ROPs are likely the limiting factor at 4K, as pixel fill rate of 200.0 GPixel/s becomes insufficient for high-resolution rendering.

The memory subsystem plays a critical role in Hitman 2’s performance. The 10 GB VRAM capacity is sufficient for 1080p and 1440p at all settings, but at 4K Ultra, the game’s texture requirements may approach this limit. The 380.0 GB/s bandwidth is moderate by modern standards, and the 2375 MHz memory clock (19 Gbps effective) contributes to the bandwidth figure. The measured FPS drops from 1440p to 4K suggest that memory bandwidth, rather than raw compute, is the primary constraint at higher resolutions.

The GPU’s DirectX 12 Ultimate support and 12_2 feature level are relevant for Hitman 2, which supports modern rendering features. However, the game was released in 2018, so it does not heavily utilize ray tracing or mesh shaders. The B570’s 18 ray tracing cores are present but largely idle in this title. The GPU’s PCIe 4.0 x8 interface might theoretically limit bandwidth in some scenarios, but the measured data shows no evidence of this bottleneck, as the combo’s performance scales predictably with resolution.

How This Combo Ranks

The AMD Ryzen 5 5600 and Intel Arc B570 combination ranks 2399th out of 3001 tested combos in Hitman 2. This places the pairing in the bottom 20% of all configurations, which is surprising given the individual component scores. The CPU ranks in the 74th percentile and the GPU in the 65th percentile, yet their combined performance is notably lower. This discrepancy suggests that Hitman 2 is particularly demanding on this specific hardware pairing, or that the game does not optimize well for the B570’s architecture.

The combo’s rank indicates that many other CPU-GPU pairings achieve higher frame rates in this title. The data shows that the B570’s performance is competitive with its rivals in synthetic benchmarks, but the real-world Hitman 2 results lag behind what those scores might predict. The GPU’s nearest rival, the Intel Arc A750, is only 0.1% slower in average benchmark score, yet the B570 struggles with 4K performance in this game. This could be due to driver optimization or the specific rendering paths used by Hitman 2.

The CPU’s nearest rivals provide context for its contribution to the combo rank. Since the 5600 is within 0.5% of its closest competitors, the CPU is not the differentiator in the low combo rank. Instead, the GPU’s interaction with the game engine appears to be the determining factor. The 2399th rank out of 3001 combos means the pairing is in the 20th percentile, which aligns with the GPU’s 65th percentile ranking being dragged down by the game’s specific demands.

The rank also reflects the resolution scaling issues observed. At 1080p, the combo performs adequately with 70 FPS on High settings, but at 4K, the frame rates fall below playable thresholds for all settings except Low. This makes the combo poorly suited for 4K gaming in Hitman 2, which is a significant factor in its low overall rank. The data suggests that users targeting 4K should consider alternative GPU options, while 1080p users will find acceptable performance.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across resolutions and settings. At 1920x1080, the combo achieves 123 FPS on Low, 93 FPS on Medium, 70 FPS on High, and 52 FPS on Ultra. The Medium preset shows a minimum of 79 FPS and maximum of 106 FPS, indicating some frame pacing variability. The 1080p results are generally smooth, with even Ultra settings maintaining above 50 FPS.

At 2560x1440, performance drops significantly. Low settings produce 79 FPS, Medium 59 FPS, High 45 FPS, and Ultra 33 FPS. The Medium preset at 1440p shows a minimum of 50 FPS and maximum of 68 FPS, which is still playable but with noticeable dips. High settings at 1440p drop to 45 FPS, which may be acceptable for some users but falls below the 60 FPS target. Ultra settings at 1440p are borderline at 33 FPS, making fast-paced stealth sequences potentially stuttery.

At 3840x2160, the combo struggles. Low settings yield 42 FPS, Medium 32 FPS, High 24 FPS, and Ultra 18 FPS. The Medium preset at 4K shows a minimum of 27 FPS and maximum of 36 FPS, indicating significant frame time spikes. High and Ultra settings at 4K are effectively unplayable, with frame rates below 25 FPS. The data suggests that 4K is only viable with Low settings, and even then, the 42 FPS average may feel inconsistent in crowded scenes.

The progression from Low to Ultra at each resolution shows a consistent pattern. At 1080p, the drop from Low to Ultra is 71 FPS (from 123 to 52). At 1440p, the drop is 46 FPS (from 79 to 33). At 4K, the drop is 24 FPS (from 42 to 18). This narrowing gap at higher resolutions indicates that the GPU is increasingly limited by raw pixel throughput rather than settings complexity, reinforcing the GPU-bound nature of the configuration.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo is at 1080p with High settings, delivering 70 FPS. This provides a smooth frame rate while maintaining visual quality. For users prioritizing higher frame rates, 1080p Low offers 123 FPS, which is suitable for competitive play or high-refresh-rate displays. The Medium preset at 1080p, with 93 FPS, represents a balanced choice for most users.

At 1440p, Low settings with 79 FPS is the recommended configuration, as it remains above the 60 FPS threshold. Medium at 1440p offers 59 FPS, which is marginally below 60 but playable for most users. High and Ultra at 1440p are not recommended due to frame rates below 50 FPS, which can cause noticeable stuttering in action sequences. For users with adaptive sync displays, Medium at 1440p may be acceptable.

At 4K, only Low settings with 42 FPS is viable, and even this is marginal. Medium at 4K drops to 32 FPS, which is below the playable threshold for most users. High and Ultra at 4K are not recommended under any circumstances, as frame rates of 24 and 18 FPS respectively are too low for smooth gameplay. Users with 4K displays should consider reducing resolution to 1440p for a better experience.

The data indicates that the Medium preset provides the best balance of visual fidelity and performance at 1080p and 1440p, while Low is the only viable option at 4K. For users who cannot tolerate frame rate drops below 60 FPS, 1080p High is the highest quality setting that consistently maintains this threshold. The Ultra preset is only suitable for 1080p users who prioritize visual quality over frame rate stability.

FAQ

*Q: What is the best resolution for this combo in Hitman 2?*

A: 1080p is the optimal resolution, with High settings delivering 70 FPS and Low settings reaching 123 FPS. 1440p is playable at Low (79 FPS) and Medium (59 FPS), while 4K is only viable at Low (42 FPS).

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the combo achieves only 18 FPS average, which is unplayable. The GPU’s 80 ROPs and 380.0 GB/s memory bandwidth are insufficient for 4K Ultra in this game.

Q: Is the Ryzen 5 5600 or Arc B570 the bottleneck?

A: The data shows the GPU is the limiting factor at all resolutions above 1080p Low. The CPU’s 6 cores and 12 threads with 4.40 GHz boost provide ample headroom, as evidenced by the consistent resolution scaling pattern.

Q: How does this combo rank compared to other configurations?

A: The combo ranks 2399th out of 3001 tested combinations, placing it in the bottom 20%. This is lower than expected given the CPU’s 74th percentile and GPU’s 65th percentile individual rankings.

Q: What settings should I use for 1440p gaming?

A: Low settings at 1440p produce 79 FPS, which is the recommended choice for smooth gameplay. Medium settings yield 59 FPS, which is acceptable for most users, but High (45 FPS) and Ultra (33 FPS) are not recommended.

*Q: Does the CPU’s 32 MB L3 cache impact Hitman 2 performance?*

A: The CPU’s cache configuration is adequate for this game, as benchmark results show the processor is not the limiting factor. The 3DMark single-thread score of 882 indicates sufficient per-core performance for the game’s AI and physics systems.