Greedfall

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3070 combination delivers a highly playable Greedfall experience across most settings, but the data reveals a clear performance ceiling at 4K Ultra that shifts the bottleneck firmly onto the GPU. At 1080p, this combo is exceptionally strong, while at 4K, only the High preset maintains a playable frame rate.

Resolution Scaling

The scaling from 1080p to 4K shows a dramatic and predictable drop in performance, with the severity heavily dependent on the graphics preset. At Low settings, the average frame rate falls from 205.1 FPS at 1920x1080 to 82.4 FPS at 3840x2160, a reduction of roughly 60%. This large drop indicates that even at Low settings, the rendering load at 4K is substantial enough to strain the RTX 3070, though the absolute numbers remain high.

The scaling pattern shifts when moving to higher presets. At High settings, the average FPS goes from 146.4 at 1080p to 103 at 1440p, and finally to 60.6 at 4K. The transition from 1440p to 4K represents a 41% performance loss, which is a significant but expected cost for the fourfold increase in pixel count. At Ultra settings, the situation becomes more critical: the average FPS drops from 95.9 at 1080p to 62.5 at 1440p and then plummets to 36.3 at 4K. This 62% loss from 1080p to 4K at Ultra shows that the combination of the highest visual fidelity and maximum resolution is too demanding for this hardware pairing.

The data suggests the CPU is not the limiting factor at lower resolutions. At 1080p Low, the system achieves 205.1 FPS, a figure that far exceeds the refresh rate of most monitors and points to the GPU being the primary constraint even at this resolution. As resolution increases, the GPU load grows disproportionately, confirming that the RTX 3070 is the component that dictates the performance ceiling in Greedfall for this combo.

GPU Role

The NVIDIA GeForce RTX 3070, built on the Ampere architecture with an 8 nm process, brings 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. This memory configuration is sufficient for 1080p and 1440p gaming in Greedfall, but the 4K Ultra result of 36.3 FPS suggests the 8 GB frame buffer and the GPU's compute resources are stretched thin at that extreme setting.

The GPU's clock speeds are 1500 MHz base and 1725 MHz boost. These clocks, combined with 5888 shading units and 184 texture mapping units, allow the card to deliver a texture rate of 317.4 GTexel/s and a pixel rate of 165.6 GPixel/s. These specifications explain why the card handles Medium and High presets well at 1440p, achieving 111.3 and 103 FPS respectively. The card's FP32 performance of 20.31 TFLOPS is a solid indicator of its raw compute capability, which is sufficient for the game's Action RPG rendering demands.

The GPU's benchmark percentile of 72 versus all GPUs places it in a solid mid-to-high tier. Its nearest rival, the AMD Radeon RX 6600 XT, has an average score of 27985, a 0.9% delta from the RTX 3070's score of 28238. This close margin indicates that in synthetic benchmarks, the two cards are nearly interchangeable, though the measured FPS data here shows the RTX 3070 performing admirably in Greedfall specifically. The 8 GB VRAM is not a bottleneck at 1080p, where even Ultra settings yield 95.9 FPS, but it likely contributes to the severe performance degradation at 4K Ultra.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3070 ranks 794th out of 1705 tested combos for Greedfall. This places it in the upper-middle tier of all possible pairings, which is a reasonable position given that the RTX 3070 is a previous-generation card and the Ryzen 5 7600 is a capable but not top-end CPU.

The CPU itself has an average benchmark score of 26617, placing it in the 83rd percentile of all CPUs. Its nearest rival, the AMD Ryzen 7 5800X3D, scores 26574, a mere 0.2% difference. This effectively puts the Ryzen 5 7600 on par with the 5800X3D in average CPU performance, meaning the processor is not holding back the GPU in most scenarios. The GPU's average benchmark score of 28238 places it in the 72nd percentile, with its nearest rival being the AMD Radeon RX 6600 XT at 27985, a 0.9% delta.

The rank of 794 out of 1705 suggests that while this combo is not in the top tier for Greedfall, it outperforms a majority of other tested configurations. The data indicates that the 1080p High result of 146.4 FPS and the 1440p High result of 103 FPS are strong showings that justify this ranking. The 4K Ultra result of 36.3 FPS is the weakest link, but it is an outlier compared to the rest of the measured data.

Settings Recommendations

For 4K resolution, the High preset is the only viable option, delivering an average of 60.6 FPS. This is just above the 60 FPS threshold for smooth gameplay, making it the recommended choice for 4K displays. The Medium preset at 4K offers 64.5 FPS, which is slightly higher, but the visual quality difference between Medium and High is often significant in an Action RPG like Greedfall, so High is the better trade-off. The Ultra preset at 4K, with its 36.3 FPS average, should be avoided as it falls below playable standards.

At 1440p, the High preset is the sweet spot, achieving 103 FPS. This provides a comfortable margin above 60 FPS and allows for high visual fidelity. The Medium preset at 111.3 FPS is also excellent, but High offers a better balance of performance and visuals. The Ultra preset at 1440p yields 62.5 FPS, which is playable but not ideal for fast-paced action; it is a viable option for players who prioritize maximum visuals over a higher frame rate.

At 1080p, all presets are playable, with even Ultra achieving 95.9 FPS. The Low preset produces 205.1 FPS, which is ideal for competitive play or high-refresh-rate monitors. However, for the best visual experience without sacrificing performance, the High preset at 146.4 FPS is the recommended choice. The Medium preset at 158.3 FPS is a close alternative for those seeking a bit more performance.

FAQ

Q: What is the best preset for 4K gaming with this combo?

A: The High preset is the best choice for 4K, delivering an average of 60.6 FPS. The Ultra preset at 4K drops to 36.3 FPS, which is not recommended.

Q: How does the Ryzen 5 7600 compare to its nearest CPU rival?

A: The Ryzen 5 7600 has an average benchmark score of 26617, which is 0.2% higher than the AMD Ryzen 7 5800X3D's score of 26574, making them effectively equal in average performance.

Q: Is the RTX 3070's 8 GB VRAM sufficient for Greedfall?

A: The 8 GB VRAM is sufficient for 1080p and 1440p, where the combo achieves 95.9 and 62.5 FPS on Ultra, respectively. At 4K Ultra, the performance drops to 36.3 FPS, which suggests the VRAM or GPU compute is a limiting factor.

Q: What frame rate can I expect at 1440p on High settings?

A: The measured average FPS at 2560x1440 on High settings is 103 FPS, providing a smooth experience well above the 60 FPS standard.

Q: Does this combo rank highly among all tested configurations?

A: It ranks 794th out of 1705 combos, placing it in the upper-middle tier and indicating it outperforms a majority of other pairings for this game.

Q: What is the performance difference between Low and Ultra at 1080p?

A: The Low preset achieves 205.1 FPS, while the Ultra preset achieves 95.9 FPS, a difference of 109.2 FPS, showing a significant trade-off between visuals and performance.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture and codenamed Raphael. It has a base clock of 3.80 GHz and a boost clock of 5.10 GHz, with a 65 W TDP. The CPU features 32 MB of shared L3 cache and supports DDR5 memory with a bandwidth of 83.2 GB/s. These specifications position it as a strong gaming CPU, and the benchmark data confirms this.

The CPU's single-thread performance is notable, with a Cinebench R23 single-core score of 3246. This is crucial for Greedfall, as many game engines rely heavily on single-thread performance for game logic and physics. The multi-core performance is also solid, with a Cinebench R23 multi-core score of 22992. The 3DMark scores further illustrate its capability: a single-thread score of 999 and a max-thread score of 6503.

The CPU's average benchmark score of 26617 places it in the 83rd percentile of all CPUs, and its nearest rival, the Intel Core i9-12900HK, has a score of 26672, a delta of -0.2%. This means the Ryzen 5 7600 is statistically tied with a high-end mobile processor, which is impressive for a desktop chip. In the context of Greedfall, the CPU's strong single-thread performance ensures that it does not bottleneck the RTX 3070 at 1080p, as evidenced by the 205.1 FPS result at Low settings.

Measured FPS Breakdown

At 1920x1080 resolution, the combo shows a wide range of performance across settings. The Low preset produces an average of 205.1 FPS, the Medium preset yields 158.3 FPS, the High preset achieves 146.4 FPS, and the Ultra preset delivers 95.9 FPS. This data shows a clear linear progression, with each step up in settings costing a significant number of frames.

At 2560x1440 resolution, the performance remains strong. The Low preset averages 142.7 FPS, the Medium preset hits 111.3 FPS, the High preset maintains 103 FPS, and the Ultra preset drops to 62.5 FPS. The drop from High to Ultra at this resolution is 40.5 FPS, which is a substantial hit for the increased visual fidelity.

At 3840x2160 resolution, the performance becomes more constrained. The Low preset averages 82.4 FPS, the Medium preset achieves 64.5 FPS, the High preset just manages 60.6 FPS, and the Ultra preset falls to 36.3 FPS. The scaling from 1440p to 4K at High settings results in a 42.4 FPS loss, demonstrating the heavy load that 4K places on the RTX 3070. Overall, the data confirms that 1080p is the resolution where this combo excels, 1440p is a strong middle ground, and 4K is only viable on lower presets.