Greedfall

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3070 pairing in Greedfall demonstrates a classic balance where the GPU becomes the definitive bottleneck at higher resolutions, while the CPU’s strong single-thread performance allows for exceptional frame rates at 1080p. The data shows a clear and predictable scaling pattern: as resolution increases, the performance cost of each settings tier expands dramatically, revealing where this combination’s strengths and limitations lie.

Resolution Scaling

The measured FPS data shows that resolution is the single largest factor in performance variance for this combo. At 1080p with Low settings, the system produces 204.5 FPS, but this drops to 144.7 FPS at 1440p and further to 86.8 FPS at 4K. This represents a 29% performance drop from 1080p to 1440p and a 40% drop from 1440p to 4K at Low settings, indicating that the RTX 3070’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth are increasingly strained as pixel count rises.

The scaling pattern becomes more severe at higher settings. At Ultra settings, the frame rate falls from 92.9 FPS at 1080p to 65.6 FPS at 1440p (a 29% reduction) and then to 37.7 FPS at 4K (a 43% reduction from 1440p). This non-linear drop suggests that the GPU’s 20.31 TFLOPS of FP32 compute and 165.6 GPixel/s pixel rate are being saturated by the combination of high resolution and intensive graphical effects.

The limiting component shifts visibly across the resolution spectrum. At 1080p Low, the 204.5 FPS result exceeds what most displays can show, implying the CPU’s 5.30 GHz boost clock and 6 cores are keeping up with the GPU’s output. However, by 4K Ultra, the 37.7 FPS result is barely playable, and the gap between Low and Ultra at 4K (86.8 vs 37.7 FPS) demonstrates that the RTX 3070’s 5888 shading units are the primary constraint. The data indicates that this combo is GPU-limited at 4K across all settings, while the CPU headroom at 1080p allows the GPU to stretch its legs.

Settings Recommendations

The most efficient settings tier for this combination is Medium at 1440p, delivering 111.7 FPS. This represents a 61% improvement over Ultra at the same resolution (65.6 FPS) while maintaining a frame rate well above 60 FPS. At 4K, the data shows that High settings (59.6 FPS) is the only viable preset for smooth gameplay, as Ultra drops to 37.7 FPS and even Medium falls to 67.8 FPS, which is borderline for high-refresh displays.

For users prioritizing frame rate over visual fidelity, Low at 1440p provides 144.7 FPS, which aligns perfectly with 144 Hz monitors. At 1080p, all settings except Ultra exceed 146 FPS, with Low reaching 204.5 FPS, making this resolution ideal for competitive play or high-refresh displays. The data clearly shows that Ultra is the least efficient preset at every resolution, with the 1080p Ultra result (92.9 FPS) being lower than 1440p Medium (111.7 FPS), indicating that the visual cost of Ultra does not justify its performance penalty.

The sweet spot for this hardware pairing is 1440p Medium or High. High at 1440p yields 98.9 FPS, which is close to the 100 FPS threshold and provides better image quality than Medium. At 4K, users should stick to High (59.6 FPS) and avoid Ultra entirely, as the 37.7 FPS result falls below acceptable playability standards for an action RPG.

CPU Role

The Ryzen 5 7600X contributes significantly to this game’s performance through its high clock speeds and strong multi-threaded capabilities. With a base clock of 4.70 GHz and boost clock of 5.30 GHz, this 6-core, 12-thread processor provides the single-thread performance that Greedfall’s engine appears to favor. The Cinebench R23 single-core score of 3406 and multi-core score of 24128 indicate a processor that excels in both lightly-threaded and fully-loaded scenarios.

The CPU’s 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth (DDR5 dual-channel) support the game’s asset streaming and physics calculations. The PassMark physics score of 1824 suggests adequate computational power for game logic, while the 3DMark 16-thread score of 6879 shows that the CPU can handle simultaneous threads without significant degradation.

However, the data indicates that the CPU is not the limiting factor in most scenarios. At 1080p Low, the 204.5 FPS result suggests that the CPU can feed the GPU well beyond typical display refresh rates. The CPU’s 83rd percentile ranking among all CPUs (with an average benchmark score of 26272) places it well above most gaming processors. The nearest rivals, including the AMD Ryzen 7 5700X (average score 26214, delta 0.2%), show that the 7600X is competitive with higher-core-count alternatives in this game’s workload. The CPU’s performance is sufficient to avoid bottlenecking the RTX 3070 until frame rates exceed 200 FPS, which only occurs at 1080p Low.

FAQ

*Q: What is the best resolution for this combo in Greedfall?*

A: The data shows 1440p as the optimal resolution. High settings at 1440p deliver 98.9 FPS, and Medium reaches 111.7 FPS, both comfortably above 60 FPS while providing better image quality than 1080p.

*Q: Can this system handle 4K gaming in Greedfall?*

A: Yes, but only at High settings, which produce 59.6 FPS. Ultra at 4K drops to 37.7 FPS, which is not recommended for smooth gameplay.

Q: How much performance is lost between Low and Ultra settings?

A: At 1080p, Ultra (92.9 FPS) is 54.6% slower than Low (204.5 FPS). At 1440p, the gap is 54.7% (65.6 vs 144.7 FPS), and at 4K, Ultra (37.7 FPS) is 56.6% slower than Low (86.8 FPS).

Q: Is the CPU or GPU the bottleneck at 1080p?

A: The data suggests the GPU is still the primary limiter, but the CPU has headroom. At 1080p Low, the 204.5 FPS result indicates the CPU can support very high frame rates, with the RTX 3070’s 8 GB VRAM and 5888 shading units being the ultimate constraint.

Q: What frame rate can be expected at 1440p with High settings?

A: The measured average is 98.9 FPS, which is suitable for high-refresh displays (100 Hz or higher) and provides a smooth experience for an action RPG.

Q: How does this combo rank among all tested configurations?

A: It ranks 776th out of 1705 tested combos, placing it in the upper-middle tier. This ranking reflects the balanced but not top-tier nature of the RTX 3070 paired with a strong mid-range CPU.

GPU Role

The NVIDIA GeForce RTX 3070 is the dominant performance factor in this pairing, with its 8 GB GDDR6 memory and 256-bit bus providing 448.0 GB/s of bandwidth. The GPU’s 5888 shading units, 184 texture mapping units, and 96 ROPs drive the rendering pipeline, with a boost clock of 1725 MHz enabling 20.31 TFLOPS of FP32 compute. These specifications explain the performance scaling observed across resolutions.

At 1080p, the GPU’s pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are sufficient to maintain high frame rates even at Ultra settings (92.9 FPS). Moving to 1440p, the increased pixel count challenges the memory bandwidth, with Ultra dropping to 65.6 FPS. The 4K results show the RTX 3070’s limits clearly: even Low settings (86.8 FPS) require significant memory throughput, and Ultra (37.7 FPS) falls below playable thresholds.

The GPU’s 72nd percentile ranking among all GPUs (average benchmark score 28238) places it slightly above the mid-range. Its nearest rivals include the AMD Radeon RX 6600 XT (average score 27985, delta 0.9%), indicating the RTX 3070 holds a modest performance edge. The 8 GB VRAM capacity is a notable factor in Greedfall, as the game’s texture-heavy environments at 4K likely approach this limit, contributing to the steep performance drop between Medium (67.8 FPS) and Ultra (37.7 FPS) at that resolution.

The GPU’s 46 RT cores and 184 tensor cores provide additional capabilities, though their impact on this game’s traditional rasterization workload is minimal. The 14 Gbps effective memory clock and dual-slot design (220 W TDP) make this a capable card for 1440p gaming, but the data confirms that 4K Ultra is beyond its practical reach.

Measured FPS Breakdown

The complete measured FPS data for this combo shows a consistent pattern across all settings tiers. At 1080p, Low produces 204.5 FPS, Medium 163.5 FPS, High 146.3 FPS, and Ultra 92.9 FPS. The gap between Medium and High is relatively small (17 FPS), while the jump from High to Ultra costs 53.4 FPS, indicating that Ultra’s additional effects are disproportionately expensive.

At 1440p, the results are 144.7 FPS (Low), 111.7 FPS (Medium), 98.9 FPS (High), and 65.6 FPS (Ultra). The performance drop from 1080p to 1440p is consistent at roughly 29-30% for Low, Medium, and High settings, but only 28% for Ultra, suggesting that the GPU is already saturated at 1080p Ultra.

The 4K results show the steepest degradation: 86.8 FPS (Low), 67.8 FPS (Medium), 59.6 FPS (High), and 37.7 FPS (Ultra). The drop from 1440p to 4K is 40% at Low settings, 39% at Medium, 40% at High, and 43% at Ultra. This consistency across settings indicates that resolution scaling is the dominant factor, with the GPU’s memory bandwidth and compute resources being the primary constraints. The 4K High result of 59.6 FPS is the only 4K setting that remains above 60 FPS, and it barely crosses that threshold.

How This Combo Ranks

In the database of 1705 tested combinations, this AMD Ryzen 5 7600X + RTX 3070 pairing ranks 776th, placing it in the 45th percentile of all tested systems. This mid-pack ranking reflects the RTX 3070’s position as a solid but not flagship GPU, despite the CPU’s strong performance. The CPU alone ranks in the 83rd percentile among all processors, but the combo’s overall ranking is dragged down by the GPU’s 72nd percentile standing.

The ranking suggests that Greedfall is more GPU-bound than CPU-bound for this hardware. The 7600X’s high single-thread performance (Cinebench R23 single-core 3406) is sufficient to feed the GPU, but the RTX 3070’s 8 GB VRAM and compute throughput limit the system’s ability to compete with higher-tier GPU pairings. The combo’s rank of 776 out of 1705 indicates that while it outperforms the majority of tested systems, there is significant headroom for improvement by pairing this CPU with a more powerful GPU.

The measured FPS data supports this ranking: the system achieves excellent frame rates at 1080p and good rates at 1440p, but struggles at 4K Ultra. This places it in a comfortable mid-range position, capable of handling most gaming scenarios at high settings, but not competitive with top-tier configurations for 4K enthusiasts. The combo’s 1440p High result of 98.9 FPS is a strong indicator of its intended use case, balancing visual quality with smooth performance.