Greedfall

Greedfall

AVERAGE FPS
106
good

This combination provides smooth gameplay with an average of 106 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 58 65 86
1440p QHD 64 99 114 144
1080p Full HD 96 149 158 204

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 86
3840x2160 Medium 65
3840x2160 High 58
3840x2160 Ultra 39
2560x1440 Low 144
2560x1440 Medium 114
2560x1440 High 99
2560x1440 Ultra 64
1920x1080 Low 204
1920x1080 Medium 158
1920x1080 High 149
1920x1080 Ultra 96

Greedfall with AMD Ryzen 7 5700G + NVIDIA GeForce RTX 3070, In-Depth Analysis

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 3070 combination lands at rank 787 out of 1705 tested combos for Greedfall, placing it firmly in the upper-middle tier of the database. That percentile positioning is respectable, but it does not scream high-end dominance; rather, it indicates a balanced pairing where neither component is dramatically holding the other back at most settings. The data shows this is a combo capable of very high frame rates, but one that requires deliberate settings choices to avoid falling into sub-60 territory at the most demanding presets.

How This Combo Ranks

With a rank of 787 out of 1705 combos, this pairing sits in the 46th percentile of all tested configurations for Greedfall. This is not a top-tier showing, but the context matters: the list includes many combinations with far more powerful CPUs and GPUs. The RTX 3070’s own benchmark percentile is 72, meaning it outperforms 72% of all GPUs in the database, while the Ryzen 7 5700G’s percentile is 83 among CPUs. The gap between those two percentiles hints that the GPU is the more limiting factor in this pair, which is typical for a 1080p and 1440p-focused setup. The combo rank reflects that balance: it is not a bottlenecked system, but it also does not push into the top tier of results, which are reserved for pairings with higher-end GPUs.

GPU Role

The RTX 3070 brings 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. For a game like Greedfall, which is an Action RPG from 2019, this memory configuration is more than adequate for the textures and geometry on display. The GPU’s boost clock of 1725 MHz and base of 1500 MHz, combined with 5888 shading units, provide the raw compute headroom. The measured FPS data shows the GPU is clearly the primary driver of performance differences between settings. At 4K Ultra, the average FPS collapses to 39.2, while dropping to 4K Low more than doubles that to 86.4. This massive swing is the signature of a GPU-bound scenario where the rendering load scales directly with quality settings. The GPU’s 20.31 TFLOPS of FP32 compute is the muscle behind these numbers, but the data indicates that at 4K, even this level of compute is not enough for Ultra settings in Greedfall.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, which confirms the RTX 3070 is the limiting component at higher resolutions. At High settings, the average FPS falls from 148.8 at 1080p to 98.9 at 1440p, then to 58.4 at 4K. That is a 60% reduction from 1080p to 4K. At Low settings, the drop is from 203.5 to 143.9 to 86.4, a 58% reduction. The fact that the relative drop is nearly identical across settings suggests that the scaling is purely resolution-driven, not settings-driven. This is classic GPU-bound behavior: the CPU has enough headroom to feed the GPU at all resolutions, but the GPU’s fill rate and memory bandwidth are taxed harder as pixel count increases. The 448.0 GB/s bandwidth becomes a limiting factor at 4K, especially when texture quality demands more data movement.

Measured FPS Breakdown

The measured FPS data provides a clear picture of what to expect. At 1920x1080, the combo delivers excellent frame rates across the board. Low settings hit an average of 203.5 FPS, Medium drops to 158.3, High to 148.8, and Ultra to 96.2. All of these are playable on high-refresh monitors, with Ultra still comfortably above 60 FPS. Moving to 2560x1440, the numbers remain strong: Low averages 143.9, Medium 113.5, High 98.9, and Ultra 63.9. The Ultra setting at 1440p is the first point where the frame rate dips close to the 60 FPS threshold, but it still clears it. At 3840x2160, the picture changes dramatically. Low averages 86.4, Medium 65.1, High 58.4, and Ultra 39.2. Only Low and Medium are reliably playable at 4K; High dips below 60, and Ultra is a slideshow by comparison. The data shows a clear hierarchy: 1080p is effortless, 1440p is strong, and 4K requires settings compromises.

Settings Recommendations

For the best experience per the measured rows, the sweet spot is 1440p with High settings, which delivers 98.9 FPS on average. This gives a substantial visual upgrade over 1080p while maintaining a frame rate that is smooth on most displays. If the goal is maximum fidelity, 1440p Ultra at 63.9 FPS is still playable, but the 35% drop from High to Ultra suggests diminishing returns. For 4K users, Medium settings at 65.1 FPS is the only option that stays comfortably above 60; High at 58.4 is borderline, and Ultra at 39.2 should be avoided. At 1080p, High at 148.8 is the recommended choice, as it offers a strong balance of visual quality and headroom for competitive play. Low settings at 1080p hit 203.5 FPS, but that is overkill for a single-player Action RPG and sacrifices too much visual fidelity. The data suggests that this combo is best used at 1440p, where it can leverage its power without hitting the 4K wall.

CPU Role

The Ryzen 7 5700G provides 8 cores and 16 threads with a base clock of 3.80 GHz and a boost of 4.60 GHz. It is a Zen 3 part with 16 MB of L3 cache, and its benchmark scores back up its capability. In Cinebench R23, it scores 20755 multi-core and 2930 single-core. These numbers are strong, but the game’s performance data indicates that the CPU is not the primary bottleneck in most scenarios. The fact that the 1080p Low setting hits 203.5 FPS shows that the CPU can feed the GPU at very high frame rates. The nearest rival comparisons for the CPU show it is closely matched with the AMD Ryzen 7 6800U (-0.3% delta) and Intel Core 5 210H (+0.5% delta), confirming it is a solid mid-range performer. In Greedfall, the CPU’s 16 threads are likely more than enough, as the game is not heavily multi-threaded. The data shows that the GPU is the limiting factor at 4K, but at 1080p, the CPU keeps up easily. The 5700G’s single-thread score of 2930 in Cinebench R23 is particularly relevant, as it ensures that the game’s main thread is handled without stutter. The CPU’s performance ceiling is well above what this game requires, making it a non-issue for the measured results.

Hardware Specifications

AMD Ryzen 7 5700G

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700G + NVIDIA GeForce RTX 3070 in Greedfall

Resolution Settings Avg FPS
3840x2160 Low 86.4
3840x2160 Medium 65.1
3840x2160 High 58.4
3840x2160 Ultra 39.2
2560x1440 Low 143.9
2560x1440 Medium 113.5
2560x1440 High 98.9
2560x1440 Ultra 63.9
1920x1080 Low 203.5
1920x1080 Medium 158.3
1920x1080 High 148.8
1920x1080 Ultra 96.2

Greedfall with Ryzen 7 5700G + Other GPUs

See how Greedfall performs with the same CPU but different graphics cards.

Greedfall with RTX 3070 + Other CPUs

See how Greedfall performs with the same GPU but different processors.

Other Games with Ryzen 7 5700G + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.