Greedfall

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5060 pairing delivers a solid 1080p and 1440p experience in Greedfall, but 4K Ultra is a stretch. The data shows a clear performance hierarchy across settings, with the GPU often being the limiting factor at higher resolutions.

FAQ

Q: What is the best resolution for this combo in Greedfall?

A: The data shows that 1920x1080 and 2560x1440 are the sweet spots. At 1080p High, the combo averages 134.3 FPS, and at 1440p High it averages 93.7 FPS. 4K is playable but less consistent, with High settings yielding 53.8 FPS and Ultra dropping to 36.4 FPS.

Q: How much performance does the RTX 5060 gain from lowering settings from High to Low?

A: The gain is substantial. At 1080p, Low settings produce 190.7 FPS versus 134.3 FPS on High, which is roughly a 42% improvement in average frame rate. At 1440p, the jump is from 93.7 FPS to 133.4 FPS, and at 4K it goes from 53.8 FPS to 80.4 FPS.

Q: Is the Ryzen 5 7500F a bottleneck for the RTX 5060 in this game?

A: The benchmark data suggests the CPU is well-matched for this title. The 7500F has 6 cores and 12 threads, with a boost clock of 5.00 GHz, and its Cinebench R23 multicore score of 22799 places it in the 82nd percentile of all CPUs. The frame rates scale consistently with resolution, indicating the GPU is the primary limiter at 4K.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 828th out of 1705 tested combos, placing it in the middle of the database. This indicates it is a balanced pairing, not an extreme outlier in either the high-end or low-end performance spectrum.

Q: What is the GPU's memory configuration and how does it affect 4K performance?

A: The RTX 5060 has 8 GB of GDDR7 memory on a 128-bit bus with 448.0 GB/s bandwidth. The 4K results suggest this capacity is sufficient for High settings (53.8 FPS), but the Ultra preset’s 36.4 FPS average indicates that the memory bandwidth and capacity are stressed by the highest texture and effect loads.

Q: Is the CPU's single-thread performance relevant for Greedfall?

A: Yes. The 7500F scores 3218 in Cinebench R23 single-core and 974 in 3DMark single-thread. These scores are strong, and the game’s frame pacing at lower resolutions like 1080p, where the CPU has more influence, remains high, with Low settings hitting 190.7 FPS.

GPU Role

The NVIDIA GeForce RTX 5060 is the primary driver of Greedfall’s visual output. Its specifications show a 5 nm Blackwell 2.0 chip with 3840 shading units and a boost clock of 2497 MHz. The data indicates this GPU provides a significant performance headroom at standard resolutions. The 8 GB GDDR7 memory pool, while not the largest, is paired with a 128-bit bus, yielding a bandwidth of 448.0 GB/s. This memory subsystem is crucial for the texture streaming and asset loading in an Action RPG like Greedfall.

The measured FPS data reveals how the GPU's load scales with resolution. At 1080p, the GPU is clearly capable of high refresh rates; the Low preset averages 190.7 FPS, showing the GPU can push frames far beyond standard 60 Hz monitors. As resolution increases to 1440p, the average frame rates on High settings remain robust at 93.7 FPS, indicating a smooth experience for most players. However, the 4K results expose the GPU's limitations. The jump from High (53.8 FPS) to Ultra (36.4 FPS) at 3840x2160 is a drop of over 30%, showing that the 8 GB VRAM and 448.0 GB/s bandwidth are taxed heavily by the Ultra preset's demands. The GPU's PassMark G3D score of 20891 and its 73rd percentile ranking among all GPUs support the narrative of a mid-to-high-tier performer that excels at 1080p and 1440p but struggles to maintain playable 4K Ultra settings.

How This Combo Ranks

In the database of tested configurations, the Ryzen 5 7500F + RTX 5060 combination ranks 828th out of 1705 combos. This places it in the upper-middle tier of overall performance. This rank is a holistic metric, balancing the strong CPU performance against the GPU's limits. The CPU itself is an above-average part; its average benchmark score of 24993 puts it in the 82nd percentile, and it is within 0.4% of rivals like the AMD Ryzen 9 6900HX and Intel Core i7-11850H in average score. This indicates the 7500F is not the limiting factor in the pairing.

The GPU, however, is a more average performer relative to its peers. Its average benchmark score of 30109 places it in the 73rd percentile. It is virtually tied with the AMD Radeon RX 7700 XT (deltaPct of 0.0) and sits within 0.6% of the NVIDIA GeForce RTX 5070 Mobile. This suggests that while the combo is well-balanced, the GPU's performance class is the defining characteristic for most gaming workloads. The 828th rank out of 1705 combos reflects that this pairing is a common middle-ground configuration, offering dependable performance without the extreme high-end or low-end trade-offs seen in other builds.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance scaling across three resolutions and four quality presets. At 1920x1080, the combo is exceptionally fast. The Low preset achieves an average of 190.7 FPS, which is ideal for high-refresh-rate monitors. Moving up to Medium yields 151.8 FPS, and High drops to 134.3 FPS. The Ultra preset still manages a very playable 89.2 FPS, showing that the GPU has enough headroom to run maxed-out settings at 1080p without issue.

At 2560x1440, the performance remains solid but begins to show the GPU's workload. Low settings produce 133.4 FPS, which is still excellent. Medium and High presets deliver 102.9 FPS and 93.7 FPS respectively, both of which are well within the range for smooth gameplay. The Ultra preset, however, drops to 60.6 FPS. While this is technically playable, it is a significant step down from the other presets, indicating that the 4K Ultra workload is starting to saturate the GPU's resources even at 1440p.

The 3840x2160 results show the true limits of this configuration. Low settings average 80.4 FPS, which is a playable experience. Medium drops to 62.2 FPS, and High falls to 53.8 FPS. The Ultra preset is the outlier, with an average of just 36.4 FPS. This is below the 60 FPS target most players prefer and suggests that the 8 GB memory buffer and GPU compute power are insufficient for the full Ultra experience at 4K.

Settings Recommendations

For the best experience, the data points to a simple rule: stick to High settings for a balanced visual quality and frame rate. At 1080p, High settings yield 134.3 FPS, which is excellent. At 1440p, High settings provide 93.7 FPS, which is near the ideal smoothness target. The Medium preset offers only a marginal improvement (151.8 FPS at 1080p, 102.9 FPS at 1440p) over High, but the visual quality trade-off is often not worth the extra frames in a game like Greedfall where atmosphere matters.

The Ultra preset is generally not recommended for this pair. At 1440p, it averages 60.6 FPS, which is a 35% drop from High. At 4K, Ultra dips to 36.4 FPS, which is a poor experience. If a player insists on 4K, the data shows that Low settings (80.4 FPS) are the only way to achieve a comfortably playable frame rate. The Low preset itself is viable for competitive play or if the user prioritizes frame rate over fidelity, especially at 1440p where it hits 133.4 FPS. In summary, High settings at 1440p is the optimal configuration for this hardware, providing a strong balance of visual fidelity and performance.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture. Its base clock is 3.70 GHz with a boost clock of 5.00 GHz. In the context of Greedfall, an Action RPG from 2019, the CPU's role is to manage game logic, AI, and physics, which are typically not as demanding as modern simulation titles. The benchmark scores reflect a capable mid-range part. Its Cinebench R23 multicore score of 22799 and single-core score of 3218 place it in the 82nd percentile of all CPUs, indicating strong overall processing power.

The CPU's performance characteristics are well-suited for this game. The high single-thread performance (3DMark single-thread score of 974) is beneficial for games that rely on a single primary thread for rendering commands. The measured FPS data supports the idea that the CPU is not a bottleneck in this pairing. At 1080p, where CPU overhead is highest, the combo still achieves 134.3 FPS on High settings, showing that the 7500F can feed the RTX 5060 enough data to maintain high frame rates. The PassMark multithread score of 26825 and the 3DMark 16-thread score of 6376 demonstrate that the CPU has ample headroom for background tasks and future game updates. The L3 cache of 32 MB (shared) is a healthy amount for a 6-core part, helping to reduce memory latency for game data. Overall, the Ryzen 5 7500F provides a solid foundation, ensuring the RTX 5060 is the primary determinant of frame rates in Greedfall.