Control

Control is a 2019 action-adventure title that stresses both the CPU and GPU heavily, and this pairing of an AMD Ryzen 5 7500F with an NVIDIA GeForce RTX 5060 produces a dataset that clearly delineates the performance boundaries of each component. The measured frame rates across three resolutions and four quality presets reveal a system that is comfortably capable at 1080p and 1440p, while 4K performance demands significant settings concessions. The data indicates that the RTX 5060, with its 8 GB of GDDR7 memory and 128-bit bus, becomes the primary limiting factor as resolution climbs, whereas the 6-core, 12-thread Ryzen 5 7500F provides a robust foundation that does not bottleneck the GPU in this title.

Resolution Scaling

The measured FPS data shows a predictable and steep decline as resolution increases from 1920x1080 to 3840x2160, with the magnitude of the drop varying by settings preset. At the High preset, the average frame rate falls from 94 FPS at 1080p to 71 FPS at 1440p, a reduction of 23 FPS, and then further down to 48 FPS at 4K, representing a cumulative 49% loss from the baseline 1080p figure. This scaling pattern indicates that the GPU is the dominant constraint at higher resolutions, as the pixel count quadruples from 1080p to 4K, demanding proportionally more from the rasterization and memory subsystems.

At the Low preset, the same resolution progression yields 149 FPS at 1080p, 113 FPS at 1440p, and 76 FPS at 4K, which shows a less severe percentage drop between 1080p and 1440p (24%) compared to the High preset's 24.5% drop, but the 4K figure still represents a 49% reduction from the 1080p baseline. The Medium preset shows a similar trend, with 106 FPS at 1080p, 80 FPS at 1440p, and 54 FPS at 4K, while the Ultra preset delivers 82 FPS at 1080p, 62 FPS at 1440p, and 42 FPS at 4K. The consistent pattern across all presets suggests that the RTX 5060's memory bandwidth of 448.0 GB/s and its 128-bit bus width are the limiting factors at 4K, as the GPU cannot maintain the same throughput when pixel fill demands increase.

The transition from 1440p to 4K is particularly punishing, with average FPS dropping by roughly one-third across all presets, which aligns with the doubling of pixel count from approximately 3.7 million to 8.3 million pixels. The data shows that at 4K Ultra, the system produces 42 FPS, which is below the 60 FPS threshold commonly considered smooth for action titles, while 4K High at 48 FPS and 4K Medium at 54 FPS remain playable but not ideal for high-refresh displays. The scaling behavior suggests that the RTX 5060's 8 GB VRAM capacity, while sufficient at 1080p and 1440p, may be strained at 4K with higher texture quality settings, as the frame rate drops are more pronounced than what pure pixel count increases would predict.

How This Combo Ranks

This specific combination of the Ryzen 5 7500F and RTX 5060 ranks 1665 out of 3720 tested combos in Control, placing it in the 55th percentile of all configurations. This mid-pack ranking reflects a balanced pairing where neither component is drastically mismatched, but the overall performance is not exceptional compared to higher-end systems. The ranking suggests that while this combo handles Control well at mainstream resolutions, it does not compete with top-tier configurations that would feature faster GPUs with more VRAM.

The CPU's individual percentile ranking of 77 among all CPUs indicates that the Ryzen 5 7500F is a solidly above-average processor, but its nearest rivals show how tightly grouped the mid-range CPU market is. The Intel Core i7-11850H scores 24935, a delta of just 0.1% from the Ryzen's 24964 average benchmark score, while the AMD Ryzen 5 8400F is 0.2% faster at 25005. The Intel Core i7-13620H is 0.2% slower at 24911, and the Intel Core 5 210H trails by 0.4% at 24872, demonstrating that the 7500F sits in a performance cluster where differences are negligible for gaming workloads.

The GPU's percentile ranking of 72 places the RTX 5060 in the upper third of all graphics cards, but its nearest rivals reveal a competitive landscape. The AMD Radeon 860M scores 26401, just 0.3% above the RTX 5060's 26331 average, while the NVIDIA GeForce MX550 scores 26421, also 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% faster at 26553, and the AMD Radeon RX 6750 XT is 1.2% slower at 26011. This tight clustering means that in Control, the RTX 5060's performance is within a few percentage points of several other mid-range GPUs, making the overall combo ranking more dependent on the specific game's optimization than on raw hardware superiority.

GPU Role

The NVIDIA GeForce RTX 5060, built on the Blackwell 2.0 architecture with the GB206 chip, provides the graphical muscle for this combo, and its specifications directly influence the measured frame rates. The GPU operates at a base clock of 2280 MHz with a boost clock of 2497 MHz, and its 3840 shading units work in conjunction with 120 texture mapping units and 48 render output units to process the game's visuals. The 30 ray tracing cores and 120 tensor cores are present but Control's implementation of ray tracing is limited, so the primary workload falls on the traditional rasterization pipeline.

The memory subsystem is a critical factor in this game's performance, with 8 GB of GDDR7 memory running at 1750 MHz (28 Gbps effective) across a 128-bit bus, yielding a bandwidth of 448.0 GB/s. At 1080p, this bandwidth is sufficient to feed the GPU's pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s, but at 4K, the bandwidth becomes a bottleneck. The measured FPS at 4K Ultra of 42 FPS, compared to 82 FPS at 1080p Ultra, represents a 49% drop that correlates with the increased memory pressure from higher resolution textures and larger frame buffers.

The GPU's FP32 performance of 19.18 TFLOPS is adequate for Control's visual effects, but the 8 GB VRAM capacity is the most likely constraint at 4K. Control's dense environments and particle effects can exceed 8 GB of VRAM usage at 4K Ultra settings, which would explain the disproportionate frame rate drop compared to lower resolutions. The RTX 5060's 145 W TDP and dual-slot design indicate that it is a mainstream power envelope, and the measured performance aligns with its position in the GPU hierarchy, ranking in the 72nd percentile overall.

FAQ

Q: What is the best resolution for this combo in Control?

A: The data shows 1920x1080 as the sweet spot, where even the Ultra preset delivers 82 FPS, while 2560x1440 is also viable with High settings at 71 FPS or Medium at 80 FPS. At 3840x2160, only the Low preset at 76 FPS approaches smooth gameplay, so 4K is not recommended for this pairing.

Q: How does the RTX 5060's 8 GB VRAM affect 4K performance?

A: The 8 GB of GDDR7 memory on a 128-bit bus provides 448.0 GB/s of bandwidth, and the measured data shows 4K frame rates dropping to 42-76 FPS depending on settings. The steep decline from 1080p to 4K suggests VRAM capacity and bandwidth become limiting factors at 4K, particularly at High and Ultra presets.

Q: Is the Ryzen 5 7500F a bottleneck for the RTX 5060 in this game?

A: The Ryzen 5 7500F's 6 cores and 12 threads with a boost clock of 5.00 GHz deliver a 3DMark single-thread score of 974 and a Cinebench R23 single-core score of 3218, which are strong results. The measured FPS scaling from 1080p to 4K follows GPU-bound patterns, indicating the CPU is not the primary limiter in Control.

Q: What settings preset provides the most balanced experience at 1440p?

A: At 2560x1440, the Medium preset delivers 80 FPS with a minimum of 68 FPS and maximum of 92 FPS, which offers a good balance of visual quality and smoothness. The High preset at 71 FPS is also acceptable, while Ultra at 62 FPS may dip below 60 FPS in demanding scenes.

Q: How does this combo compare to other tested configurations?

A: This pairing ranks 1665 out of 3720 total combos for Control, placing it in the middle of the pack. The CPU is in the 77th percentile of all CPUs, while the GPU is in the 72nd percentile, and both components are within 1% of their nearest rivals in average benchmark scores.

Q: What is the maximum FPS achievable with this hardware?

A: The highest measured average is 149 FPS at 1920x1080 with the Low preset. The Ultra preset at 1080p reaches 82 FPS, and the Medium preset at 1080p achieves 106 FPS, so the maximum frame rate depends entirely on the chosen quality settings.

CPU Role

The AMD Ryzen 5 7500F, based on the Zen 4 architecture with the Raphael codename, provides the computational foundation for this combo, and its specifications are well-suited to Control's requirements. The processor features 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz, which delivers strong single-threaded performance crucial for game logic and physics calculations. The 32 MB of shared L3 cache, alongside 1 MB of L2 cache per core and 64 KB of L1 cache per core, helps reduce memory latency for frequently accessed game data.

The CPU's benchmark results demonstrate its capability: a 3DMark single-thread score of 974 and a Cinebench R23 single-core score of 3218 indicate solid per-core performance, while the multi-threaded scores of 6376 (3DMark 16-thread) and 22799 (Cinebench R23 multi-core) show that Control's threading model can utilize the available cores effectively. The PassMark multithread score of 26825 and the Geekbench multi-core score of 12362 further confirm that the 7500F provides ample processing power for the game's AI routines and physics simulations.

The CPU's 65 W TDP and 5 nm process node from TSMC contribute to its efficiency, and its memory support for DDR5 with dual-channel configuration providing 83.2 GB/s of bandwidth ensures that the processor can feed data to the GPU without becoming a bottleneck. The Ryzen 5 7500F ranks in the 77th percentile of all CPUs, and its average benchmark score of 24964 places it within 0.4% of its nearest rivals, including the Intel Core i7-11850H and the AMD Ryzen 5 8400F. In Control, the measured FPS differences between 1080p and 4K are consistent with a GPU-limited scenario, confirming that the CPU's 6 cores and 12 threads are sufficient to keep the RTX 5060 fed at all tested resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and desired frame rate. At 1920x1080, the Medium preset delivers 106 FPS with a minimum of 90 FPS and maximum of 122 FPS, which provides a smooth experience for high-refresh-rate monitors, while the High preset at 94 FPS is also viable if visual fidelity is prioritized over frame rate. The Ultra preset at 82 FPS remains playable but offers diminishing returns over High, so High is the recommended choice for 1080p gaming.

For 2560x1440, the Medium preset at 80 FPS (minimum 68, maximum 92) is the best balance of quality and performance, as the High preset drops to 71 FPS and the Ultra preset falls to 62 FPS, which may produce noticeable stutters in fast-paced action sequences. The Low preset at 113 FPS is available for competitive play, but the visual quality reduction is significant, making Medium the pragmatic choice for most users. At 3840x2160, only the Low preset at 76 FPS provides acceptable performance, as the Medium preset at 54 FPS and High preset at 48 FPS fall below the 60 FPS threshold, and the Ultra preset at 42 FPS is not recommended for this game.

The data suggests that this combo is best utilized at 1080p with High settings or at 1440p with Medium settings, as these configurations maintain frame rates above 70 FPS while preserving visual quality. The 8 GB VRAM capacity of the RTX 5060 should be sufficient for these resolutions and settings, based on the measured performance not showing signs of memory-related stuttering at 1080p or 1440p.

Measured FPS Breakdown

The complete dataset of measured FPS for this combo in Control is as follows:

At 1920x1080:

• Low preset: 149 FPS average
• Medium preset: 106 FPS average, with minimum of 90 FPS and maximum of 122 FPS
• High preset: 94 FPS average
• Ultra preset: 82 FPS average

At 2560x1440:

• Low preset: 113 FPS average
• Medium preset: 80 FPS average, with minimum of 68 FPS and maximum of 92 FPS
• High preset: 71 FPS average
• Ultra preset: 62 FPS average

At 3840x2160:

• Low preset: 76 FPS average
• Medium preset: 54 FPS average, with minimum of 46 FPS and maximum of 62 FPS
• High preset: 48 FPS average
• Ultra preset: 42 FPS average

These numbers reveal a consistent pattern across all resolutions: the Low preset offers roughly 1.4-1.8 times the frame rate of the Ultra preset, and the Medium preset provides a 1.2-1.3 times improvement over High. The minimum and maximum FPS figures for the Medium preset at each resolution show a spread of 32-36 FPS, indicating that Control's frame times vary considerably during intense scenes. The data confirms that this combo delivers playable performance at 1080p across all settings, at 1440p up to High settings, and at 4K only with Low settings.