Greedfall

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 5060 combination produces a wide spread of frame rates in Greedfall, ranging from a highly playable 188.6 FPS at 1080p Low to a demanding 35.5 FPS at 4K Ultra. The data reveals a system where the GPU is the primary scaling factor, but the CPU's large cache architecture provides a stable foundation across all settings. This analysis examines the measured FPS rows to determine where the bottleneck lies and which settings offer the best experience.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured data shows a clear and consistent pattern of performance degradation as resolution increases, which is the classic signature of a GPU-bound workload. At 1080p High, the combo delivers 136.1 FPS, but moving to 1440p High drops that to 92.5 FPS, a reduction of 43.6 FPS. The jump to 4K High further reduces performance to 58.8 FPS, a 33.7 FPS drop from the 1440p figure. This scaling is steep and linear, indicating that the RTX 5060's rendering pipeline is the limiting factor as pixel count rises.

The Low preset tells a similar story, though from a higher starting point. At 1080p Low, the system achieves 188.6 FPS, which falls to 130 FPS at 1440p and 75.5 FPS at 4K. The percentage drops are substantial at each step, reinforcing that the GPU is doing the heavy lifting. If the CPU were the bottleneck, we would expect to see the 1080p and 1440p scores cluster closer together, as the processor would cap performance before the GPU became fully stressed. Instead, the consistent erosion of FPS with each resolution increase points directly at the GeForce RTX 5060 as the primary constraint.

Interestingly, the gap between 1080p and 1440p is larger than the gap between 1440p and 4K for the High preset. The 1080p to 1440p transition costs 43.6 FPS, while the 1440p to 4K transition costs 33.7 FPS. This suggests that at 1080p, the GPU is working well within its limits, and the extra pixels at 1440p begin to saturate its capabilities. At 4K, the GPU is already heavily loaded, so the additional pixel count produces a smaller absolute but still significant drop. The data implies that for this title, the RTX 5060 is best suited for 1080p and 1440p gaming, with 4K reserved for lower presets or less demanding scenes.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5060 comes equipped with 8 GB of GDDR7 memory on a 128-bit bus, providing a memory bandwidth of 448.0 GB/s. This bandwidth is critical for Greedfall's open-world environments, which stream textures and geometry as the player moves through the world. The measured FPS at 4K Ultra, which drops to 35.5 FPS, suggests that the GPU is not only compute-limited but may also be constrained by its memory subsystem. The 8 GB capacity is likely sufficient for this 2019 title at most settings, but the Ultra preset at 4K could be pushing against the VRAM ceiling, causing additional stalls.

The GPU's clock speeds are modest, with a base clock of 2280 MHz and a boost clock of 2497 MHz. These clocks, combined with the 3840 shading units, produce an FP32 throughput of 19.18 TFLOPS. The benchmark results for this GPU show a Passmark G3D score of 20891, placing it in the 73rd percentile of all GPUs. Its nearest rival is the AMD Radeon RX 7700 XT, which scores 30097, a delta of 0%. This parity in synthetic benchmarks suggests that the RTX 5060's real-world performance in Greedfall is representative of its class, but the game's engine may favor one architecture over another.

The fact that the 4K Ultra preset delivers only 35.5 FPS while 4K High delivers 58.8 FPS indicates a substantial performance cost for the highest settings. The Ultra preset likely enables additional effects that heavily tax the GPU's TMUs and ROPs, which are numbered at 120 and 48 respectively. The texture rate of 299.6 GTexel/s and pixel rate of 119.9 GPixel/s are the raw throughputs that these units provide, and Greedfall's Ultra settings appear to demand more than the RTX 5060 can efficiently deliver at 4K.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5700X3D is built on the Zen 3 architecture with 8 cores and 16 threads, running at a base clock of 3.00 GHz and a boost clock of 4.10 GHz. Its defining feature is the 96 MB of shared L3 cache, which is significantly larger than typical desktop processors. This cache is particularly beneficial for games like Greedfall that have complex AI routines and physics calculations, as it reduces the latency of memory access and keeps more data on-die.

The CPU's benchmark results show strong multi-threaded performance, with a Cinebench R23 multicore score of 22366 and a Passmark multithread score of 26318. Its single-thread performance is also respectable, with a Geekbench single-core score of 1922. The 5700X3D sits in the 82nd percentile of all CPUs, with its nearest rival being the Intel Core i7-1360P, which scores 24627, a delta of 0.2%. This close parity in synthetic benchmarks suggests that the CPU is not holding back the RTX 5060 in most gaming scenarios.

In the measured FPS data, the CPU's role becomes apparent at lower resolutions. At 1080p Low, the system hits 188.6 FPS, which is a high frame rate but not exceptionally so for a modern gaming PC. This suggests that while the CPU is capable, it may be reaching its limits at this resolution, preventing the GPU from pushing even higher. The 3.00 GHz base clock is relatively low, but the 4.10 GHz boost clock provides adequate headroom. The 5700X3D's 105 W TDP and 7 nm process node indicate an efficient design that can sustain high clocks under load without excessive power draw.

FAQ

Q: What is the best resolution for this combo in Greedfall?

A: The data shows that 1440p High delivers 92.5 FPS, which is well above the 60 FPS threshold for smooth gameplay. 1080p High provides 136.1 FPS for higher refresh rate displays, while 4K High at 58.8 FPS is close to playable but may experience occasional dips.

Q: How does the 5700X3D compare to its closest rivals in CPU benchmarks?

A: The 5700X3D has an average benchmark score of 24673, which is 0.2% higher than the Intel Core i7-1360P, 0.3% higher than the AMD Ryzen 5 7600X3D, and 0.5% higher than the Intel Core i5-11600. It trails the AMD Ryzen AI Max 385 by 0.6%.

Q: Is the RTX 5060's 8 GB VRAM sufficient for Greedfall?

A: The measured results indicate that 8 GB is sufficient for most settings, as the system achieves playable frame rates at 1440p Ultra with 59.2 FPS. However, the 4K Ultra preset at 35.5 FPS suggests that the VRAM capacity or bandwidth may be a limiting factor at the highest resolution and settings.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1080p, the Low preset achieves 188.6 FPS, while the Ultra preset achieves 85.7 FPS. This represents a 102.9 FPS difference, showing that the Ultra preset imposes a significant performance cost over Low settings.

Q: How does this combo rank among all tested combinations?

A: The combo ranks 868th out of 1705 tested combinations, placing it in the top 51% of all tested systems. This middle-of-the-pack ranking reflects the balanced performance of the CPU and GPU pair.

Q: Does the CPU bottleneck the GPU at 1080p?

A: The data shows a 52.5 FPS difference between 1080p Low at 188.6 FPS and 1440p Low at 130 FPS. This substantial drop indicates that the GPU is still the primary limiter at 1080p, though the CPU's performance ceiling may prevent extremely high frame rates beyond the 200 FPS mark.

Settings Recommendations

The measured FPS data provides clear guidance on which settings preset offers the best experience. At 1080p, the High preset at 136.1 FPS is the sweet spot, offering a 49.5 FPS improvement over Ultra while maintaining visual fidelity that is likely indistinguishable from the highest settings in most scenes. The Medium preset at 148.7 FPS is also viable for competitive play, but High provides a better balance of quality and performance.

For 1440p, the High preset at 92.5 FPS is the recommended choice. It delivers smooth gameplay on standard 60 Hz monitors and is sufficient for 144 Hz displays if the player tolerates occasional frame drops. The Medium preset at 106.8 FPS offers additional headroom for high refresh rate panels, but the visual downgrade from High may not be worth the 14.3 FPS gain. The Ultra preset at 59.2 FPS is borderline, as it sits just below the 60 FPS threshold and may cause noticeable stuttering in busy areas.

At 4K, the Low preset at 75.5 FPS is the only setting that provides a consistently smooth experience. The High preset at 58.8 FPS is playable but will dip below 60 FPS during intense combat or exploration. The Medium preset at 61.3 FPS is marginally better but still risks frame drops. The Ultra preset at 35.5 FPS is not recommended for serious gameplay, as the low frame rate will impair responsiveness and visual smoothness.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest performance. The Low preset achieves 188.6 FPS, which is the peak measured value across all resolutions and settings. The Medium preset reaches 148.7 FPS, while High drops to 136.1 FPS. The Ultra preset is the most demanding at 1080p, producing 85.7 FPS. This represents a spread of 102.9 FPS between the lowest and highest quality settings.

Moving to 2560x1440, the frame rates decrease across all presets. Low still leads with 130 FPS, followed by Medium at 106.8 FPS and High at 92.5 FPS. The Ultra preset falls to 59.2 FPS, which is the first preset to drop below the 60 FPS threshold at this resolution. The gap between Low and Ultra at 1440p is 70.8 FPS, showing a slightly smaller but still substantial performance range.

At 3840x2160, the system struggles with the highest settings. Low manages 75.5 FPS, providing a playable experience. Medium and High follow at 61.3 FPS and 58.8 FPS respectively, both hovering near the 60 FPS line. The Ultra preset drops significantly to 35.5 FPS, which is less than half of the Low preset's performance. The difference between Low and Ultra at 4K is 40 FPS, indicating that the Ultra preset's extra effects are particularly punishing at this resolution.

How This Combo Ranks

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 5060 combination ranks 868th out of 1705 tested combos in Greedfall, placing it in the 51st percentile of all systems tested. This mid-pack ranking is somewhat surprising given the individual component benchmarks. The CPU's 82nd percentile ranking and the GPU's 73rd percentile ranking would suggest a higher overall position, but the game's specific engine characteristics may not favor this particular pairing.

The CPU's performance relative to its rivals is tightly clustered. The 5700X3D's average benchmark score of 24673 is within 0.6% of its four nearest rivals, indicating that synthetic benchmarks see these processors as nearly equivalent. However, the 96 MB L3 cache may provide a real-world advantage in Greedfall that is not captured in these aggregate scores. Similarly, the GPU's Passmark G3D score of 20891 places it in a dead heat with the AMD Radeon RX 7700 XT, with a delta of 0%.

The combo's rank of 868 out of 1705 suggests that while each component is strong individually, their combination in this game does not produce top-tier results. The data implies that Greedfall may be more sensitive to raw GPU compute power than to cache size or CPU threading, which explains why the RTX 5060's mid-range standing in synthetic benchmarks translates to a mid-pack ranking in this title. Players with this combo should focus on optimizing settings to achieve their target frame rate rather than expecting top-tier performance.