Greedfall

The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. In Greedfall, this CPU configuration delivers a measured performance that places it in the 71st percentile against all tested CPUs, indicating it is a competent mid-range part for this title. The processor’s 32 MB of shared L3 cache and dual-channel DDR4 memory support help feed the GPU with data, though the game’s engine appears to lean more heavily on the graphics card for raw frame output. The Ryzen 5 3600’s 65 W TDP and AM4 socket make it a standard desktop part, and its benchmark scores—such as a Cinebench R23 multi-core score of 15045 and a single-core score of 2124—show balanced performance that prevents it from becoming a bottleneck at most settings, though the data suggests the GPU takes over as the primary limiting factor at higher resolutions.

The CPU’s nearest rivals include the Intel Core i7-1260P, which scores 17007 with a delta of 0.2% (slightly lower), and the Intel Core i5-11400, which scores 17067 with a delta of -0.2% (slightly higher). This places the Ryzen 5 3600 in a tight competitive cluster, meaning that in Greedfall, any of these processors would likely deliver similar frame rates when paired with the same GPU. The benchmark results, such as a 3DMark max-threads score of 4603 and a Passmark multithread score of 17700, reinforce that the CPU is adequate for the game’s demands, which include AI routines and physics calculations. However, the measured FPS data shows that even at 1080p with Low settings (160 avg FPS), the system is not CPU-bound in a way that would suggest a need for an upgrade, as the frame rates scale smoothly with resolution changes.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5050 is the primary driver of Greedfall’s performance, featuring 8 GB of GDDR6 memory on a 128-bit bus with 320.0 GB/s of bandwidth. The GPU’s base clock of 2317 MHz and boost clock of 2572 MHz, combined with 2560 shading units, allow it to handle the game’s rendering workloads efficiently. The RTX 5050’s 13.17 TFLOPS of FP32 performance and 20 RT cores are notable, but Greedfall is a 2019 title that does not heavily utilize ray tracing, so the rasterization throughput is what matters most here. The GPU’s percentile ranking against all GPUs is 66th, which is slightly below the CPU’s 71st percentile, suggesting that the graphics card is the more likely component to limit frame rates, especially at higher settings and resolutions.

The measured FPS data confirms this GPU-centric behavior. At 4K Ultra, the average FPS drops to 30, which is a playable but not smooth experience, while at 1080p Low, it reaches 160 avg FPS. The GPU’s 8 GB VRAM capacity is sufficient for the game’s textures at 1080p and 1440p, but at 4K with Ultra settings, the memory bandwidth and capacity become strained, as evidenced by the significant performance drop. The RTX 5050’s nearest rivals include the AMD Radeon RX 5600 XT, which scores 20713 with a delta of 1.6% (lower performance), and the NVIDIA RTX A4000 Mobile, which scores 21379 with a delta of -1.6% (higher performance). This puts the RTX 5050 in a competitive position, but the data shows that Greedfall rewards higher GPU clocks and memory bandwidth, which the RTX 5050 provides in moderation, not abundance.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for the Ryzen 5 3600 + RTX 5050 combination reveals a clear pattern of performance degradation as resolution increases, which is typical for a GPU-bound scenario. Starting at 1080p with High settings, the average FPS is 114, and this drops to 79 at 1440p (a 30.7% decrease) and then to 47 at 4K (a 40.5% decrease from 1440p). The scaling is not linear, and the percentage drops are consistent with a GPU that is running out of pixel throughput and memory bandwidth at higher resolutions. At 1080p Low, the system achieves 160 avg FPS, which drops to 111 at 1440p (a 30.6% decrease) and 66 at 4K (a 40.5% decrease), showing that the GPU’s workload scales proportionally with pixel count.

The fact that the FPS drops are similar across different settings (Low, Medium, High) when moving from 1440p to 4K—around 40%—suggests that the GPU is the limiting factor, as the CPU’s frame production capability is not being taxed at these resolutions. For example, at 1080p Medium, the average FPS is 126, which is high enough that the CPU could potentially bottleneck if the GPU were faster, but the data shows the GPU is the constraint. The 4K Ultra setting (30 avg FPS) highlights the GPU’s struggle with the game’s most demanding preset, which is likely due to the combination of 8 GB VRAM and 320 GB/s bandwidth being insufficient for the texture and shader complexity at that resolution. The benchmark results indicate that the RTX 5050’s performance ceiling is around 1080p and 1440p, where it delivers smooth frame rates, but 4K requires significant settings reductions to remain playable.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5050 combination ranks 1776 out of 2938 tested combos in Greedfall, placing it in the 60th percentile of all possible pairings. This ranking is influenced by both components’ individual capabilities, but the GPU’s 66th percentile ranking pulls the combo slightly down from the CPU’s 71st percentile. The rank of 1776 means that roughly 60% of tested combos perform better, while 40% perform worse, which is a solid mid-pack result for a system that targets 1080p and 1440p gaming. The combo’s performance is consistent with its component rankings, as the RTX 5050’s 8 GB VRAM and 128-bit bus limit its high-resolution potential, while the CPU’s 6 cores and 12 threads are more than adequate for the game’s single-threaded and multi-threaded workloads.

To contextualize the rank, the combo outperforms configurations with lower-tier GPUs or older CPUs, but it lags behind systems with higher-end graphics cards like the RTX 5070 or RX 7800 XT, which would have more VRAM and bandwidth. The data shows that the combo’s measured FPS at 1080p High (114 avg) is competitive with what a stronger CPU paired with the same GPU would achieve, indicating that the CPU is not holding back the GPU at this resolution. However, the rank also reflects that many combos with the same GPU but faster CPUs, such as a Ryzen 7 5800X3D, would see marginal gains in minimum FPS, though the average FPS would remain similar due to the GPU bottleneck. The combo’s position in the middle of the pack is a fair assessment of its capabilities, and it suggests that for Greedfall, the RTX 5050 is the defining component, with the Ryzen 5 3600 providing sufficient support without being a weak link.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings for the Ryzen 5 3600 + RTX 5050 combo depend on the target resolution and the desired frame rate experience. At 1080p, the High preset delivers 114 avg FPS, which is excellent for smooth gameplay, while the Ultra preset drops to 73 avg FPS, which is still playable but less fluid. The Medium preset at 1080p offers 126 avg FPS, which is the best balance of visual quality and performance, as it provides a 10.5% increase over High while maintaining a frame rate well above 60 FPS. For 1440p, the High preset achieves 79 avg FPS, which is good for most monitors, but the Medium preset at 87 avg FPS is a better choice for those who prefer higher refresh rates, as it delivers a 10.1% improvement over High. The 1440p Ultra preset at 50 avg FPS is below the ideal threshold for smooth play, so it is not recommended unless the user prioritizes visual fidelity over smoothness.

At 4K, the data shows that all presets struggle to maintain high frame rates, with High at 47 avg FPS and Medium at 52 avg FPS. The Medium preset at 4K is the most balanced option, as it provides a 10.6% increase over High and keeps the frame rate above 50 FPS, which is acceptable for slower-paced RPG combat. The 4K Low preset at 66 avg FPS is the only 4K option that approaches smoothness, but it sacrifices significant visual quality. The Ultra preset at 4K (30 avg FPS) is not playable for most users and should be avoided. The data suggests that the best overall experience is at 1440p with Medium or High settings, where the combo delivers 87 or 79 avg FPS respectively, offering a good balance of visual fidelity and frame rate. For users with 1080p monitors, the Medium preset at 126 avg FPS is the clear winner, as it maximizes performance without a noticeable drop in visual quality. The measured minimum FPS values, such as 107 at 1080p Medium and 74 at 1440p Medium, indicate that frame pacing is stable, which is crucial for an action RPG like Greedfall.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the average FPS at 1080p with High settings for this combo?

A: The average FPS is 114 at 1920x1080 with High settings, which is a smooth experience for most displays. The Medium preset at 1080p yields 126 avg FPS, making it the highest-performing preset that still maintains high visual quality.

Q: How does the combo perform at 4K with Ultra settings?

A: At 3840x2160 with Ultra settings, the average FPS drops to 30, which is barely playable and not recommended for action-oriented gameplay. The 4K Medium preset is more viable at 52 avg FPS, but the Low preset at 66 avg FPS is the only 4K option that approaches a comfortable frame rate.

Q: Is the CPU or GPU the bottleneck in Greedfall?

A: The data indicates the GPU is the limiting component, as the FPS drops by roughly 40% when moving from 1440p to 4K across all settings. The CPU’s 71st percentile ranking and high benchmark scores, such as a Cinebench R23 multi-core score of 15045, suggest it has ample headroom, while the GPU’s 66th percentile ranking and 8 GB VRAM are more likely to constrain performance at higher resolutions.

Q: What is the combo’s ranking among all tested combinations?

A: The AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5050 combo ranks 1776 out of 2938 tested combos in Greedfall, placing it in the middle of the pack. This ranking is consistent with the GPU being the primary performance driver, as the CPU is capable enough to keep pace.

Q: Which settings provide the best frame rate for a 1440p monitor?

A: At 2560x1440, the Medium preset offers 87 avg FPS, which is the best performance among the tested presets. The High preset at 79 avg FPS is also a strong choice, while Ultra at 50 avg FPS is below the smooth-play threshold and should be avoided.

Q: Does the combo have enough VRAM for Greedfall at 4K?

A: The RTX 5050 has 8 GB of GDDR6 memory with 320.0 GB/s of bandwidth. The measured performance at 4K High (47 avg FPS) and 4K Ultra (30 avg FPS) suggests that the VRAM capacity is sufficient for the game’s textures, but the bandwidth is insufficient to maintain high frame rates at this resolution, indicating a GPU throughput limitation rather than a memory capacity issue.