Fivem

Fivem presents a demanding workload that scales sharply with resolution and settings, and the pairing of the Intel Core i7-14700K with the NVIDIA GeForce RTX 2060 produces a wide range of outcomes. The data shows a system that is clearly capable of high refresh rates at 1080p but becomes progressively more constrained as pixel count and graphical fidelity increase. The measured results place this combo at rank 1481 out of 1792 combinations for this game, indicating that while functional, it sits in the lower half of tested configurations.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 reveals a steep performance curve that is heavily influenced by settings. At the "Ultra" preset, the average frame rate drops from 70.6 FPS at 1080p to 46.1 FPS at 1440p, and finally to 24.1 FPS at 4K. This represents a 65.9% reduction in performance from the lowest to the highest resolution tested. The pattern is consistent across all settings, but the absolute drop is most pronounced at the higher quality presets. For instance, at "Low" settings, the frame rate falls from 148.1 FPS at 1080p to 93.2 FPS at 1440p and 51 FPS at 4K, a 65.6% decrease. The scaling factor between 1440p and 4K is particularly severe, with the average FPS roughly halving at each quality level. This indicates that the GPU's rendering pipeline becomes the dominant limiting factor as the pixel workload expands, a typical signature for a graphics card with a 192-bit memory bus and 336.0 GB/s of bandwidth.

The delta between "Low" and "Ultra" settings also widens with resolution. At 1080p, the gap between the two presets is 77.5 FPS (148.1 vs 70.6). At 1440p, that gap narrows to 47.1 FPS (93.2 vs 46.1). By 4K, the difference is only 26.9 FPS (51 vs 24.1). This compression of the performance spread at higher resolutions reinforces the idea that the RTX 2060 is saturated at 4K, leaving little headroom for settings to matter. The data suggests that for a smooth experience at 4K, even "Medium" settings will struggle to maintain playable frame rates, as the 45.1 FPS average falls below the 60 FPS threshold.

CPU Role

The Intel Core i7-14700K is a high-core-count processor with 20 cores and 28 threads, based on the Raptor Lake architecture. Its boost clock of 5.60 GHz is a primary asset for Fivem, a multiplayer title that often has significant single-threaded demands. The CPU's strong single-core performance is reflected in its Cinebench R23 single-core score of 6287 and Geekbench single-core score of 2932. In contrast, its multi-core capabilities are equally robust, with a Cinebench R23 multi-core score of 44534 and a Passmark multithread score of 52392. This hardware is not the primary constraint in this configuration; its 96th percentile ranking against all CPUs shows it is far above average.

At 1080p with "Low" settings, the system achieves 148.1 FPS, which is a frame rate that could still be constrained by CPU overhead in certain multiplayer scenarios. However, the data indicates that the i7-14700K's processing power is sufficient to feed the GPU at lower resolutions. The gap between "Low" and "High" settings at 1080p is 58.1 FPS (148.1 vs 90), which is a substantial difference and points to the GPU being the scaling factor even at this resolution. The CPU's role becomes less prominent as resolution increases, as the GPU's rendering time per frame grows, giving the processor more time to prepare draw calls. The i7-14700K's performance is essentially a constant in this equation, providing a high ceiling that the RTX 2060 rarely approaches.

GPU Role

The NVIDIA GeForce RTX 2060 is the clear performance bottleneck in this pairing, particularly at higher resolutions. Its 6 GB of GDDR6 memory on a 192-bit bus with 336.0 GB/s bandwidth is a modest allocation for modern titles. The GPU's architecture, Turing, is older and lacks the raw throughput of newer designs. Its benchmark results, such as a Passmark G3D score of 14111 and a 3DMark Steel Nomad DX12 score of 1242, place it in the 58th percentile of all GPUs. This positions it as a mid-range part, which is consistent with its measured FPS.

The RTX 2060's base clock of 1365 MHz and boost clock of 1680 MHz are standard for its class. The data shows that the GPU's compute capabilities are the deciding factor in this combo. At 4K "Ultra", the 24.1 FPS average is a direct result of the GPU being unable to process the 8.3 million pixels per frame in a timely manner. The card's 1920 shading units and 48 ROPs are insufficient for the fill-rate demands of 4K. Even at 1440p, the "Ultra" preset average of 46.1 FPS indicates a significant GPU workload. The GPU's role is further highlighted by the fact that it is end-of-life, with its successor, the GeForce 30 series, already established, and its nearest rivals in benchmark scores are all AMD Radeon Pro or Radeon RX parts, showing it is in a performance class that is competitive but not dominant.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its best performance. The "Low" preset yields an average of 148.1 FPS, which is highly playable for competitive multiplayer. "Medium" settings produce 113.1 FPS, and "High" settings remain fluid at 90 FPS. The "Ultra" preset, however, drops to 70.6 FPS, which, while still playable, shows a significant cost for maximum fidelity. The scaling from "Low" to "Ultra" at this resolution is a 77.5 FPS drop, a 52.3% reduction.

Moving to 2560x1440, the average frame rates begin to fall below the 144 Hz threshold for high-refresh monitors. "Low" settings still manage 93.2 FPS, and "Medium" is at 74.5 FPS. "High" settings produce a 62.9 FPS average, which is just above the 60 FPS target, but "Ultra" drops to 46.1 FPS, indicating a sub-optimal experience for smooth gameplay. The pattern at this resolution suggests that users will need to compromise on settings to maintain a high frame rate.

At 3840x2160, the RTX 2060 is overmatched. The "Low" preset averages 51 FPS, which is the only settings level that approaches playability. "Medium" yields 45.1 FPS, "High" drops to 31.5 FPS, and "Ultra" is effectively unplayable at 24.1 FPS. The data shows a clear conclusion: 4K gaming with this GPU requires significant graphical sacrifices, and even then, the experience is not consistently smooth. The performance at 4K is consistent with the GPU's 58th percentile ranking; it is a card designed for 1080p and entry-level 1440p, not for 4K.

FAQ

Q: What is the performance difference between 1080p and 4K at the "High" settings preset?

A: At 1080p "High," the average frame rate is 90 FPS, while at 4K "High," it drops to 31.5 FPS. This is a 65% reduction in average FPS, showing that the GPU becomes the limiting factor as pixel count increases.

Q: Is the Intel Core i7-14700K or the NVIDIA GeForce RTX 2060 the main bottleneck in this configuration?

A: The benchmark data indicates the RTX 2060 is the primary constraint. The i7-14700K has a 96th percentile ranking among all CPUs, while the RTX 2060 is in the 58th percentile. The rapid FPS drop with resolution scaling is a classic sign of a GPU bottleneck.

Q: Can this system achieve a stable 60 FPS at 2560x1440 resolution?

A: Yes, but only with lower settings. The "Low" preset averages 93.2 FPS, and "Medium" averages 74.5 FPS. The "High" preset is borderline at 62.9 FPS, while "Ultra" falls to 46.1 FPS, which is below the 60 FPS target.

Q: What is the best settings preset for 3840x2160 to maintain a playable frame rate?

A: The data shows that only the "Low" preset at 51 FPS is likely to be considered playable. The "Medium" preset at 45.1 FPS and "High" at 31.5 FPS are not ideal. The "Ultra" preset at 24.1 FPS is not recommended for a smooth experience.

Q: How does the i7-14700K's single-core performance compare to its multi-core performance for this game?

A: Fivem often benefits from strong single-core performance. The i7-14700K has a Cinebench R23 single-core score of 6287 and a multi-core score of 44534. The single-core score is high, which helps maintain high frame rates at lower resolutions where CPU overhead is more significant.

Q: What is the average FPS at 1920x1080 with "Ultra" settings?

A: The average FPS at 1080p with "Ultra" settings is 70.6. This is the lowest result at that resolution, but it is still above the 60 FPS threshold, indicating that the CPU-GPU combo is capable of high-fidelity 1080p gaming.