Fivem

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 2060 delivers a playable but heavily GPU-limited experience in Fivem, with performance scaling that clearly identifies the graphics card as the primary constraint across all resolutions. The data shows a steep and consistent FPS penalty as resolution increases, but the relative gap between settings narrows at 4K, indicating the CPU has ample headroom while the RTX 2060 saturates its capabilities.

Resolution Scaling

The measured FPS data reveals a classic GPU-bound scenario where resolution scaling has a dramatic impact on frame rates. At 1080p with Low settings, the combo achieves an average of 145 FPS, but this drops to 96 FPS at 1440p and further to 53 FPS at 4K — a reduction of 34% from 1080p to 1440p and an additional 45% from 1440p to 4K. This steep decline is the signature of a graphics card reaching its pixel-pushing limits, as the RTX 2060’s 6 GB of GDDR6 memory and 336.0 GB/s bandwidth become increasingly stressed at higher resolutions.

The scaling pattern shifts when examining higher settings. At Ultra settings, the average FPS falls from 71 at 1080p to 47 at 1440p (a 34% drop) and then to 26 at 4K (a 45% drop from 1440p). This consistent proportional decline across all settings presets strongly suggests the GPU is the limiting component at every resolution, with the CPU’s 20 cores and 28 threads providing far more compute headroom than the game can utilize.

Notably, the gap between Low and Ultra settings narrows as resolution increases. At 1080p, the difference between Low (145 FPS) and Ultra (71 FPS) is a substantial 74 FPS, but at 4K that gap shrinks to just 27 FPS (53 vs 26). This convergence indicates that at 4K, the RTX 2060 is so thoroughly saturated that even reducing graphical fidelity cannot fully compensate for the raw pixel throughput required, whereas at 1080p the GPU has enough spare capacity to render higher-quality visuals without dropping below playable thresholds.

FAQ

Q: Is the Intel Core i7-14700F bottlenecking the NVIDIA GeForce RTX 2060 in Fivem?

A: No. The benchmark data shows the GPU is the limiting factor. The CPU’s Cinebench R23 multi-core score of 35122 and single-core score of 4958 place it in the 91st percentile among all CPUs, and Fivem’s frame rates scale almost entirely with resolution and settings changes — a pattern consistent with GPU saturation rather than CPU constraint.

Q: What is the best resolution for a smooth experience with this combo?

A: 1080p is the only resolution where all settings presets maintain averages above 70 FPS. At 1440p, only Low and Medium settings exceed 60 FPS (96 and 75 FPS respectively), while 4K drops below 54 FPS even at Low settings. For consistent 60+ FPS gameplay, 1080p is the clear choice.

Q: How does the RTX 2060 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 2060’s average benchmark score of 15290 is virtually identical to the NVIDIA GeForce GTX 580 (15283, 0% delta) and AMD Radeon 680M (15270, 0.1% delta). It sits 0.6% ahead of the RTX 3050 OEM and 0.8% ahead of the AMD Radeon RX 7600, indicating these GPUs are essentially performance peers in aggregate testing.

Q: Does the CPU’s high multi-threaded performance translate to better Fivem frame rates?

A: No, not at lower resolutions. The i7-14700F’s PassMark multi-thread score of 41317 and Geekbench multi-core score of 19620 are exceptionally strong, yet Fivem still shows a 74 FPS drop between Low and Ultra at 1080p. This suggests the game is not CPU-bound, as the processor has far more capability than the frame rates indicate.

Q: What is the minimum FPS recorded for this combo?

A: The only measured minimum FPS values are for Medium settings: 36 FPS at 4K, 64 FPS at 1440p, and 97 FPS at 1080p. These figures show that even the most demanding test scenarios maintain playable frame rates at 1080p and 1440p, but 4K dips below 40 FPS.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 2911 out of 3707 total tested combinations, placing it in the bottom 21% of all configurations. This rank reflects the RTX 2060’s position in the 58th percentile among all GPUs, which drags down the overall standing despite the CPU’s strong 91st percentile performance.

GPU Role

The NVIDIA GeForce RTX 2060 plays the decisive role in this combo’s Fivem performance, as evidenced by the consistent frame rate scaling across resolutions. The GPU’s 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which becomes a critical constraint at 4K where the measured average FPS never exceeds 53 even at Low settings. The 1365 MHz base clock and 1680 MHz boost clock deliver a FP32 performance of 6.451 TFLOPS, which is modest by modern standards but adequate for 1080p gaming.

The GPU’s VRAM capacity is a notable concern for Fivem at higher settings. With 6 GB of memory, the card may struggle with texture-heavy scenes at 4K Ultra, where the average FPS falls to 26. The measured data shows that dropping from Ultra to Low at 4K nearly doubles the frame rate (26 to 53 FPS), suggesting that memory bandwidth and capacity are significant limiting factors at this resolution. At 1080p, the same settings change yields a 74 FPS improvement (71 to 145), indicating the GPU has sufficient resources at lower pixel counts.

The RTX 2060’s position in the 58th percentile of all GPUs, with an average benchmark score of 15290, places it in the mid-range tier. Its nearest rivals — the GTX 580, Radeon 680M, RTX 3050 OEM, and RX 7600 — all score within 0.8% of each other, confirming that the 2060 is part of a tightly clustered performance bracket. This explains why the combo’s in-game rank is relatively low: the GPU simply cannot keep pace with the CPU’s capabilities in a game like Fivem that scales heavily with graphics load.

Measured FPS Breakdown

At 1920x1080, the combo delivers the widest range of playable frame rates. Low settings produce an average of 145 FPS, Medium yields 115 FPS with a minimum of 97 and maximum of 132, High achieves 92 FPS, and Ultra drops to 71 FPS. All four presets maintain averages above 70 FPS, making 1080p the only resolution where every setting is viable for smooth gameplay.

Moving to 2560x1440, the performance drops become more pronounced. Low settings average 96 FPS, Medium averages 75 FPS with a range of 64 to 87, High averages 60 FPS, and Ultra falls to 47 FPS. Only Low and Medium maintain averages above 60 FPS, while High barely hits the 60 FPS threshold and Ultra dips below playable smoothness for many users.

At 3840x2160, the RTX 2060 is clearly overwhelmed. Low settings average 53 FPS, Medium averages 42 FPS with a minimum of 36 and maximum of 48, High averages 33 FPS, and Ultra drops to 26 FPS. No preset at 4K achieves a 60 FPS average, and even Low settings fall short of standard refresh rates, confirming that 4K is not a viable resolution for this combo in Fivem.

The Medium settings preset provides the only complete FPS data across all resolutions, showing a clear linear progression: 115 FPS at 1080p, 75 FPS at 1440p, and 42 FPS at 4K. This represents a 35% drop from 1080p to 1440p and a 44% drop from 1440p to 4K, reinforcing the GPU-bound nature of the workload.

How This Combo Ranks

The combo’s rank of 2911 out of 3707 tested configurations places it firmly in the lower third of all combinations, at approximately the 21st percentile. This ranking is primarily attributable to the GPU’s limitations, as the RTX 2060’s 58th percentile standing among all GPUs is far below the CPU’s 91st percentile standing among all CPUs. The i7-14700F’s nearest CPU rivals — the Intel Xeon 6505P (0.2% behind), Intel Xeon Phi 7290 (0.3% ahead), AMD Ryzen 9 7900X (0.6% ahead), and AMD EPYC 7313P (0.8% ahead) — all have comparable aggregate benchmark scores, yet none of these pairings would overcome the GPU bottleneck in Fivem.

The disparity between CPU and GPU performance tiers explains why the combo ranks so low despite having a top-tier processor. In Fivem, where the measured FPS data shows steep resolution scaling, the GPU is the determining factor, and the RTX 2060’s mid-range position drags the overall rank down. The data indicates that this combo would perform significantly better if paired with a more capable GPU, as the CPU has substantial headroom — evidenced by its ability to maintain high frame rates at 1080p regardless of settings.

Settings Recommendations

For 1080p gaming, the Medium settings preset offers the best balance of performance and visual quality, delivering 115 FPS average with a minimum of 97 FPS and maximum of 132 FPS. This preset provides a comfortable margin above 60 FPS while still offering improved visuals over Low. High settings at 92 FPS are also viable for users prioritizing image quality, but Ultra at 71 FPS begins to approach the threshold where frame drops become noticeable.

At 1440p, Medium settings are the recommended choice, with a 75 FPS average and a minimum of 64 FPS that ensures consistent playability. Low settings at 96 FPS offer the smoothest experience but sacrifice visual fidelity, while High at 60 FPS is borderline and Ultra at 47 FPS is not recommended for competitive play.

4K gaming is not recommended with this combo, as even Low settings average only 53 FPS. If 4K is unavoidable, Medium settings at 42 FPS with a 36 FPS minimum provide the best visual compromise, but users should expect frame rates well below standard refresh rates. The data clearly shows that 1080p Medium is the optimal configuration for this hardware combination, offering the highest frame rates with adequate visual quality and a minimum FPS above 90.