Fivem

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 2060 delivers a playable but resolution-sensitive experience in Fivem, with the data showing a clear shift from CPU-bound performance at 1080p to GPU-bound limitations at 4K. The measured FPS drops are steep and consistent across all settings, indicating that the RTX 2060 becomes the primary constraint as pixel count increases. This combo ranks in the lower half of tested configurations, at 1479 out of 1792, which aligns with the GPU's mid-range standing in the database.

Resolution Scaling

The performance curve from 1080p to 4K reveals a classic bottleneck transition. At 1920x1080 with Low settings, the combo achieves 143.4 FPS, which drops to 93.5 FPS at 2560x1440 and further to 51.7 FPS at 3840x2160. This represents a 64% reduction from 1080p to 4K at Low settings, a substantial loss that points to the GPU struggling to fill the additional pixels. The pattern holds across all presets: High settings fall from 92.7 FPS at 1080p to 59.6 FPS at 1440p and 30.3 FPS at 4K, a 67% drop. Medium settings show similar scaling, with 116.8 FPS at 1080p dropping to 75.8 FPS at 1440p and 41.8 FPS at 4K.

The Ultra preset exhibits the most dramatic degradation. Starting at 73.9 FPS in 1080p, it falls to 43.4 FPS at 1440p and a barely playable 27.7 FPS at 4K. This 63% reduction from 1080p to 4K confirms that the RTX 2060's 6 GB frame buffer and 336.0 GB/s bandwidth are simply insufficient for high-resolution Ultra workloads. The scaling between 1080p and 1440p is less punishing—roughly 35-40% drops across presets—suggesting that 1440p remains a viable target for this hardware, while 4K is only feasible at Low settings, where the 51.7 FPS average is the only result above 30 FPS.

GPU Role

The NVIDIA GeForce RTX 2060, built on the Turing architecture with a TU106 chip, is the limiting factor at higher resolutions. Its 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which appears inadequate for 4K Ultra workloads, evidenced by the 27.7 FPS result. The GPU's boost clock of 1680 MHz and base clock of 1365 MHz are modest by modern standards, and the 1920 shading units deliver 6.451 TFLOPS of FP32 performance. This places the card at the 58th percentile among all GPUs, and its nearest rivals—the AMD Radeon RX 7600S (0.5% slower) and AMD Radeon Pro 5600M (1.7% faster)—occupy a similar performance tier.

The data shows that the GPU's role dominates from 1440p upward. At 2560x1440, the gap between Low (93.5 FPS) and Ultra (43.4 FPS) is 50.1 FPS, highlighting how much headroom the settings menu provides. This spread narrows at 1080p, where Low hits 143.4 FPS and Ultra achieves 73.9 FPS, a difference of 69.5 FPS. The RTX 2060's 160 W TDP and support for DirectX 12 Ultimate suggest it can handle modern rendering features, but the 4K results indicate that memory capacity and bandwidth are the binding constraints. The 30 RT cores and 240 tensor cores provide ray tracing and DLSS support, yet the measured data shows no scenario where 4K High exceeds 30.3 FPS, making such features impractical at that resolution.

CPU Role

The Intel Core i5-14600KF is a strong partner that does not bottleneck the GPU at most settings. With 14 cores and 20 threads, split between performance and efficiency cores, the CPU reaches a boost clock of 5.30 GHz and a base of 3.50 GHz. Its 24 MB of shared L3 cache and 2 MB L2 per core provide ample bandwidth for game logic. The CPU sits at the 93rd percentile among all processors, and benchmark data shows it edges out the Intel Core i5-14600K by 0.4% while trailing the AMD EPYC 4345P by 0.5% in average scores.

The 1080p results demonstrate the CPU's headroom. At Low settings, the combo reaches 143.4 FPS, which is likely near the CPU's practical limit for Fivem's multiplayer workloads. The fact that Ultra at 1080p still achieves 73.9 FPS—more than double the 4K Ultra result—indicates that the CPU can feed the GPU adequately at lower pixel counts. The CPU's Cinebench R23 multicore score of 32889 and single-core score of 4643 reflect strong single-thread performance, which matters for Fivem's server-side and physics calculations. However, the data does not show a scenario where the CPU becomes the primary limiter; even at 1080p Low, the frame rate is constrained by the GPU's ability to render frames, not by the CPU's processing capacity.

Settings Recommendations

For 1920x1080, the Medium preset at 116.8 FPS offers the best balance of visual quality and performance, being 24.1 FPS faster than High (92.7 FPS) while still looking substantially better than Low (143.4 FPS). The Ultra preset at 73.9 FPS is smooth enough for most multiplayer scenarios, but the 42.9 FPS gap between Ultra and Medium suggests diminishing returns. At 2560x1440, High at 59.6 FPS is the sweet spot, providing 17.8 FPS more than Ultra (43.4 FPS) while maintaining visual fidelity above Medium (75.8 FPS). The Medium preset is also viable at 75.8 FPS, but High offers a better visual experience for only a 16.2 FPS penalty.

For 3840x2160, only the Low preset at 51.7 FPS is playable. The Medium setting at 41.8 FPS is borderline, while High (30.3 FPS) and Ultra (27.7 FPS) fall below acceptable thresholds for fast-paced multiplayer action. Users prioritizing 4K should accept Low settings, as the jump to Medium yields only a 9.9 FPS improvement but requires significantly more GPU resources. The data does not support any preset above Low at 4K for consistent frame delivery.

How This Combo Ranks

This configuration ranks 1479 out of 1792 tested combos for Fivem, placing it in the bottom 17.5% of the database. This low ranking is driven primarily by the GPU's performance ceiling, as the RTX 2060 sits at the 58th percentile among all GPUs while the CPU is at the 93rd percentile. The mismatch between the two components is evident: the i5-14600KF's benchmarks (Cinebench R23 multicore 32889, Geekbench multicore 15636) are far stronger than the GPU's Passmark G3D score of 14111. In practical terms, the CPU has significant headroom that the GPU cannot exploit, particularly at 1440p and above. The combo's rank suggests that users with this pairing are leaving performance on the table—a stronger GPU would yield substantial gains without changing the CPU.

Measured FPS Breakdown

At 1920x1080, the measured FPS values are: Low 143.4, Medium 116.8, High 92.7, Ultra 73.9. The spread from Low to Ultra is 69.5 FPS, showing that settings have a major impact at this resolution. At 2560x1440, the results are: Low 93.5, Medium 75.8, High 59.6, Ultra 43.4. The spread narrows to 50.1 FPS, but the absolute values remain playable for most presets. At 3840x2160, the data shows: Low 51.7, Medium 41.8, High 30.3, Ultra 27.7. The spread here is 24.0 FPS, and only Low exceeds 50 FPS. The resolution scaling is consistent: moving from 1080p to 1440p costs roughly 35% of FPS, while moving from 1440p to 4K costs an additional 45% on average across presets.

FAQ

Q: Is this combo capable of 60 FPS at 1080p?

A: Yes, all four presets exceed 60 FPS at 1920x1080, with Low at 143.4 FPS, Medium at 116.8 FPS, High at 92.7 FPS, and Ultra at 73.9 FPS.

Q: Can this system handle 4K gaming?

A: Only at Low settings, which achieves 51.7 FPS. Medium drops to 41.8 FPS, and High and Ultra fall to 30.3 FPS and 27.7 FPS respectively.

Q: Which component limits performance at 1440p?

A: The RTX 2060 is the primary constraint at 2560x1440, as evidenced by the 50.1 FPS difference between Low (93.5 FPS) and Ultra (43.4 FPS), while the CPU has ample headroom.

Q: How does this combo rank compared to other tested configurations?

A: It ranks 1479 out of 1792 combos for Fivem, placing it in the lower 17.5% of all tested systems.

Q: What is the best preset for 1440p gaming?

A: High settings at 59.6 FPS offer the best balance, being 16.2 FPS faster than Ultra while providing better visuals than Medium at 75.8 FPS.

Q: Is the CPU or GPU more powerful in this pairing?

A: The CPU is significantly stronger, sitting at the 93rd percentile among all CPUs, while the GPU is at the 58th percentile, indicating a CPU-heavy imbalance.