Fivem

The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 2060 presents a distinct performance profile in Fivem, characterized by a significant bottleneck at the graphics card. The data indicates that while the CPU is exceptionally capable, the GPU limits frame rates, particularly at higher resolutions. This analysis breaks down the measured results to understand the interplay between resolution, settings, and component utilization.

Resolution Scaling

The measured FPS data reveals a clear and steep decline in performance as resolution increases, a pattern that strongly indicates the NVIDIA GeForce RTX 2060 is the primary limiting factor in this configuration. At 1920x1080 with Low settings, the system achieves an average of 145 FPS. Moving to 2560x1440 at the same Low settings, the average drops to 96 FPS, which is a reduction of approximately 34%. Scaling further to 3840x2160 at Low settings yields an average of 53 FPS, representing a significant 63% decrease from the 1080p result.

This scaling behavior is consistent across all settings presets. At High settings, the average frame rate falls from 92 FPS at 1080p to 60 FPS at 1440p, and then to 33 FPS at 4K. The drop from 1440p to 4K at High settings is a 45% reduction in performance. For Ultra settings, the numbers are 71 FPS at 1080p, 47 FPS at 1440p, and 26 FPS at 4K. The trend shows that the pixel throughput demand of 4K resolution (3840x2160) overwhelms the RTX 2060's 6 GB GDDR6 memory and its 336.0 GB/s bandwidth. The scaling from 1080p to 1440p is less severe, but still substantial, indicating that even at 1440p the GPU is working near its limits. The data suggests that the CPU's high performance is largely untapped in these scenarios, as the frame rate is dictated by the GPU's rendering capabilities rather than the processor's ability to feed it data. The resolution scaling results point to a system that is best suited for 1080p gaming, where the GPU can still deliver high frame rates, while 4K gaming will be constrained to lower settings to maintain playable performance.

FAQ

Q: What is the maximum average frame rate this combo can achieve at 1080p?

A: The highest average FPS recorded for this configuration is 145 FPS, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the RTX 2060's performance compare to its nearest rivals?

A: The RTX 2060 has an average benchmark score of 15290. Its closest rival, the NVIDIA GeForce GTX 580, scores 15283, which is a 0% delta. The AMD Radeon RX 7600 scores 15171, placing it 0.8% behind the RTX 2060. This indicates the RTX 2060 is positioned in a tightly contested performance tier.

Q: Is the Ryzen 7 9850X3D a high-performance processor relative to others?

A: Yes, the Ryzen 7 9850X3D has a percentile ranking of 92 against all CPUs. Its average benchmark score of 58386 is 0.1% higher than the Intel Xeon Platinum 8260M and 0.5% higher than the Intel Core i9-14900, showing it is a top-tier part.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset delivers an average of 96 FPS, while the Ultra preset averages 47 FPS. This represents a performance gap of 49 FPS, with the Ultra preset delivering roughly half the frame rate of the Low preset.

Q: Does the RTX 2060 support modern graphics APIs?

A: The RTX 2060 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, ensuring compatibility with contemporary game rendering technologies.

Q: At what resolution and settings does the system first fail to reach 60 FPS?

A: The system drops below 60 FPS at 3840x2160 resolution on the High settings preset, where it averages 33 FPS. At 2560x1440, all settings presets maintain an average above 47 FPS, with only the Ultra preset falling below the 60 FPS threshold.

GPU Role

The NVIDIA GeForce RTX 2060 plays the role of the limiting component in this Fivem setup. Its specifications show a 6 GB GDDR6 memory capacity on a 192-bit bus, providing 336.0 GB/s of bandwidth. The GPU's clock speeds are a base of 1365 MHz and a boost of 1680 MHz. These characteristics are essential to interpreting the measured frame rates. In Fivem, a multiplayer game with potentially dense scenes, the 6 GB VRAM buffer is a key constraint. At 4K resolution, the game's memory footprint can easily exceed this amount, leading to the observed low average FPS of 26 on Ultra and 33 on High. The steep performance drop from 1080p to 4K is a direct consequence of the GPU's memory bandwidth and capacity being saturated.

The RTX 2060's compute capabilities, while dated, are still relevant. It has 1920 shading units and 48 ROPs. The pixel rate of 80.64 GPixel/s and texture rate of 201.6 GTexel/s are the metrics that dictate how quickly it can fill the screen. The data shows that at 1080p, the GPU can process frames quickly enough to reach an average of 145 FPS on Low, but this number falls rapidly as pixel count increases. The GPU's 160 W TDP and its position in the 58th percentile of all GPUs indicate it is a mid-range part from its generation. Its average benchmark score of 15290 is nearly identical to the GTX 580 (15283), showing that its raw compute is comparable to much older architectures, but its modern feature set, such as DirectX 12 Ultimate, provides additional functionality. The benchmark results for the GPU show a Passmark G3D score of 14111, which is the primary indicator of its 3D rendering performance. This score, combined with the measured FPS data, confirms that the GPU is the primary bottleneck, especially when resolution and settings are increased.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1920x1080, the High preset provides an average of 92 FPS, which is a smooth and responsive experience. The Medium preset at 1080p yields 115 FPS, offering a significant boost over High with likely minimal visual impact. The Low preset at 1080p reaches 145 FPS, which is ideal for competitive play where maximum frame rate is prioritized. However, for a balance of visual fidelity and performance, the Medium preset is the recommended choice at this resolution, as it stays well above the 60 FPS threshold and offers a higher frame rate than High.

At 2560x1440, the High preset delivers an average of 60 FPS, which is the baseline for a playable experience on many displays. The Low preset at 1440p achieves 96 FPS, providing a much smoother experience but with lower visual quality. The Medium preset at 1440p averages 75 FPS, which is a strong middle ground. The Ultra preset at 1440p drops to 47 FPS, which is below the 60 FPS target and may not be ideal for fast-paced gameplay. Therefore, for 1440p, the Medium preset is recommended to maintain a high frame rate while keeping visual settings reasonable. For 3840x2160, all presets fall below 60 FPS, with the Low preset achieving 53 FPS and the High preset only 33 FPS. At this resolution, the Low preset is the only viable option for a somewhat playable experience, though it still fails to hit the 60 FPS mark. The data suggests that 4K gaming is not a strength of this combination, and users should either lower the resolution or accept lower frame rates. The Medium preset at 4K, with an average of 42 FPS, is a compromise but is still below the 60 FPS target.

Measured FPS Breakdown

The dataset provides 12 distinct measurements across four settings and three resolutions. At 1920x1080, the results are as follows: Low preset averages 145 FPS, Medium preset averages 115 FPS with a minimum of 97 FPS and a maximum of 132 FPS, High preset averages 92 FPS, and Ultra preset averages 71 FPS. The spread from Low to Ultra at 1080p is 74 FPS, showing a substantial performance cost for higher visual settings. At 2560x1440, the Low preset averages 96 FPS. The Medium preset averages 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS. The High preset averages 60 FPS, and the Ultra preset averages 47 FPS. The performance gap between Low and Ultra at 1440p is 49 FPS. At 3840x2160, the Low preset averages 53 FPS. The Medium preset averages 42 FPS, with a minimum of 36 FPS and a maximum of 48 FPS. The High preset averages 33 FPS, and the Ultra preset averages 26 FPS. The difference between Low and Ultra at 4K is 27 FPS.

The data reveals a consistent pattern where the Medium preset is the only one with recorded min and max FPS values for each resolution. At 1080p Medium, the frame rate ranges from 97 to 132 FPS, a variance of 35 FPS. At 1440p Medium, the range is 64 to 87 FPS, a variance of 23 FPS. At 4K Medium, the range is 36 to 48 FPS, a variance of 12 FPS. This suggests that frame time consistency improves slightly as resolution increases, but the overall performance level drops. The average FPS values show a clear linear progression from Low to Ultra for each resolution, highlighting the direct impact of settings on performance. The Ultra preset at 4K, with an average of 26 FPS, is the lowest recorded result and indicates a slideshow-like experience. These numbers confirm that the system is capable of high refresh rate gaming at 1080p with lower settings, but struggles to maintain playable frame rates at 4K with high settings.

CPU Role

The AMD Ryzen 7 9850X3D is a high-end desktop processor that provides a robust foundation for gaming. It features 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. The processor is built on the Zen 5 architecture (Granite Ridge) using a 4 nm process. Its cache configuration is notable, with 96 MB of shared L3 cache, which can be beneficial for gaming workloads. The CPU's benchmark scores are impressive, with a Cinebench R23 multicore score of 22807 and a single-core score of 2228. Its Passmark multithread score of 41318 and single-thread score of 4704 place it in the 92nd percentile of all CPUs.

In this Fivem configuration, the CPU's role is to feed the GPU with draw calls and game logic. Given the GPU's limitations, the CPU is not the bottleneck in most scenarios. The data supports this, as the frame rates scale with resolution, which is a GPU-bound characteristic. At 1080p Low, the CPU can push the GPU to 145 FPS, but this is likely near the GPU's maximum capability. The CPU's strong single-thread performance, as shown by its Cinebench R15 single-core score of 343, is crucial for Fivem's multiplayer environments, which can be CPU-intensive. However, the measured FPS at 4K (e.g., 53 FPS on Low) is far below what the CPU is capable of supporting, indicating that the RTX 2060 is the limiting factor. The CPU's average benchmark score of 58386 is 0.1% higher than the Intel Xeon Platinum 8260M and 0.5% higher than the Intel Core i9-14900, showing it is a top-tier part that won't hold back the GPU in this title. The data suggests that users with this CPU could achieve much higher frame rates if paired with a more powerful GPU.

How This Combo Ranks

The combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 ranks 2345 out of 3005 tested combos in Fivem. This places it in the lower half of all tested configurations, which is a direct consequence of the GPU's performance ceiling. The CPU is a top-tier component, but the GPU's 6 GB of memory and mid-range compute power limit the overall system. The ranking indicates that while the CPU is more than capable, the system is held back by the graphics card. This is corroborated by the measured FPS data, which shows that the system struggles to maintain high frame rates at 1440p and 4K, particularly on higher settings. The GPU's percentile ranking of 58 among all GPUs further underscores its mid-range status.

The delta between the CPU's high percentile (92) and the GPU's lower percentile (58) highlights the imbalance. The system's overall rank of 2345 means that many other CPU/GPU pairings offer better performance in Fivem. This is not a reflection of the CPU's capabilities, but rather a sign that the RTX 2060 is not well-suited for this game at higher resolutions. The data shows that the system can deliver a good experience at 1080p, where it ranks relatively better due to the CPU's strength. However, for 1440p or 4K gaming, the GPU becomes a significant liability. Users looking to improve this system's rank would need to upgrade the GPU first, as the Ryzen 7 9850X3D provides ample headroom for a more powerful graphics card. The combination's performance is a textbook example of a CPU-bound system being constrained by a GPU bottleneck, resulting in a lower overall rank than the CPU alone would suggest.