Fivem

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 5070 delivers a profoundly CPU-bound experience in Fivem, where the graphics card is rarely the limiting factor until the most demanding settings are applied. The measured data reveals that this combo ranks in the top 20% of all tested configurations, with the CPU’s multi-threaded muscle and the GPU’s raw throughput combining for a robust, high-refresh-rate experience at mainstream resolutions. The FPS scaling from 1080p to 4K shows a classic sign of a strong GPU being held back by game engine and server-side physics at lower resolutions, while the Ultra preset finally shifts the bottleneck to the graphics card.

Resolution Scaling

The frame rate drop from 1920x1080 to 3840x2160 is dramatic and tells a clear story about the system’s balance. At High settings, the average FPS falls from 176.9 at 1080p to 118.6 at 1440p, and then to 61.6 at 4K. That represents a 65% reduction in frame rate from the lowest to the highest resolution tested. The scaling is not linear; the 1080p to 1440p drop is 33%, while the 1440p to 4K drop is 48%. This divergence indicates that the RTX 5070 is becoming the primary constraint as pixel count rises, whereas at 1080p, the CPU and memory subsystem are more likely the ceiling.

Looking at the Low preset, the pattern intensifies. At 1080p Low, the combo produces 283.7 FPS, which is an exceptionally high figure that the Core i7-13700K’s 24 threads can sustain. Dropping to 1440p Low yields 183.5 FPS, and 4K Low still manages 104.7 FPS. The scaling from 1080p to 4K at Low is a 63% reduction, similar to the High preset. However, the fact that 4K Low (104.7 FPS) is faster than 1440p High (118.6 FPS) underscores that the game’s visual settings have a larger impact on the GPU load than the resolution itself. The data suggests that for players targeting 4K, the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are sufficient for the asset streaming, but the frame rate will heavily depend on the quality preset chosen.

How This Combo Ranks

Within the benchmark database, this configuration ranks 343rd out of 1792 tested combos in Fivem, placing it in the 81st percentile. This is a strong result, though not elite, reflecting the game’s unique multi-threaded server load that favors high-core-count CPUs. The Core i7-13700K’s 16 cores and 24 threads provide the parallel headroom that Fivem’s custom multiplayer framework demands, while the RTX 5070 ensures that the GPU is rarely the bottleneck at 1080p and 1440p.

The ranking is more impressive when considering the CPU’s synthetic benchmarks. The processor’s average benchmark score of 47282 places it in the 93rd percentile among all CPUs, with nearest rivals including the Intel Core i7-13700KF (deltaPct -0.1) and the AMD EPYC 4364P (deltaPct 0.3). This indicates that the i7-13700K is perfectly positioned in the mid-to-high end for gaming workloads. The GPU, with an average benchmark score of 41687, sits in the 83rd percentile among all GPUs, with the NVIDIA GeForce RTX 3090 as a close rival (deltaPct 0.6). The fact that this combo ranks 343rd overall, rather than higher, suggests that Fivem’s performance is heavily influenced by server-side scripting and network code, which can limit even the most powerful hardware.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture with a 5 nm process node and 31,100 million transistors. Its 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which is fully utilized at higher resolutions and quality settings. The GPU’s boost clock of 2512 MHz and base clock of 2325 MHz, combined with 6144 shading units, deliver a theoretical FP32 performance of 30.87 TFLOPS. In Fivem, this translates to the ability to push well over 100 FPS at 1440p High, but the Ultra preset at 4K drops to 48.5 FPS, indicating that the game’s most demanding settings can still tax the GPU significantly.

The data shows that the GPU’s role becomes dominant only at the Ultra preset, where the frame rate at 1080p (136.1 FPS) is less than half of the Low preset (283.7 FPS). This suggests that the Ultra preset likely enables heavy post-processing and shadow effects that stress the 80 ROPs and 192 tensor cores. Interestingly, the GPU’s PassMark G3D score of 29137 is a strong indicator of its capability, and its percentile rank of 83 confirms it is a solid mid-range performer. However, in Fivem, the GPU often sits idle waiting for CPU data, as evidenced by the 4K Low (104.7 FPS) being nearly as fast as 1440p High (118.6 FPS), which points to the game’s engine not being heavily GPU-bound at lower settings.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 2560x1440 at High settings provides an excellent balance with 118.6 FPS, while 1920x1080 at High reaches 176.9 FPS. For 4K, only the Low preset (104.7 FPS) remains above the 100 FPS threshold, making 1440p the sweet spot for visual quality and smoothness.

Q: How does the CPU’s multi-threading help in Fivem?

A: The Core i7-13700K has 16 cores and 24 threads, and its Cinebench R23 multicore score of 39000 shows significant parallel capability. Fivem’s multiplayer framework benefits from this, as the 3DMark 16-thread score of 10717 indicates the CPU can handle multiple simulation threads simultaneously, preventing bottlenecks when many players are active.

Q: Is the RTX 5070 powerful enough for Ultra settings?

A: At 1440p Ultra, the combo achieves 90.5 FPS, and at 1080p Ultra it hits 136.1 FPS. However, 4K Ultra drops to 48.5 FPS, suggesting that the 12 GB VRAM and 201.0 GPixel/s pixel rate are sufficient for 1440p Ultra but not for 4K Ultra in this game.

Q: How does this combo compare to the RTX 3090?

A: The RTX 5070 has an average benchmark score of 41687, which is 0.6% higher than the RTX 3090’s score of 41441. In Fivem, the RTX 5070’s newer architecture and higher bandwidth (672.0 GB/s vs. the 3090’s older memory type) likely contribute to its competitive standing, though the in-game ranking is more dependent on the CPU.

Q: What frame rate can I expect at 1080p with Medium settings?

A: The measured FPS shows 220.7 FPS at 1920x1080 with Medium settings. This is a significant jump from High (176.9 FPS) and suggests that Medium is the optimal preset for high-refresh-rate monitors at 1080p.

Q: Does the CPU’s boost clock matter for this game?

A: The Core i7-13700K has a boost clock of 5.40 GHz and a single-thread PassMark score of 4333. While Fivem is multi-threaded, the high single-thread performance is still valuable for the game’s main simulation loop, as evidenced by the 3DMark single-thread score of 1136.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the average FPS ranges from 283.7 on Low to 136.1 on Ultra. The Medium preset delivers 220.7 FPS, while High achieves 176.9 FPS. The scaling from Low to Ultra at 1080p is a 52% reduction, highlighting the substantial GPU load increase from the highest quality settings.

At 2560x1440, the frame rates are still high but show the GPU beginning to work harder. Low settings produce 183.5 FPS, Medium drops to 148.6 FPS, High reaches 118.6 FPS, and Ultra falls to 90.5 FPS. The drop from Low to Ultra is 51%, closely matching the 1080p pattern, indicating that the GPU’s workload scales consistently with quality settings regardless of resolution.

At 3840x2160, the limits become apparent. Low settings yield 104.7 FPS, which is still playable, but Medium drops to 83.7 FPS, High falls to 61.6 FPS, and Ultra drops to 48.5 FPS. The 4K Ultra result is the only measured setting below 60 FPS, suggesting that this combo is not ideal for 4K Ultra gaming in Fivem. The progression from Low to Ultra at 4K is a 54% reduction, similar to other resolutions, but the absolute numbers are much lower due to the 4K pixel count.

CPU Role

The Intel Core i7-13700K plays a pivotal role in Fivem’s performance, given the game’s heavy reliance on CPU threads for multiplayer networking and physics. The processor’s 16 cores (8 performance and 8 efficiency) and 24 threads provide ample parallel capacity, as reflected in its Cinebench R23 multicore score of 39000 and Geekbench multicore score of 17731. The CPU’s boost clock of 5.40 GHz ensures that single-threaded tasks, such as the main game loop, are executed swiftly, with a 3DMark single-thread score of 1136.

The data reveals that the CPU is the primary bottleneck at lower resolutions and settings. At 1080p Low, the 283.7 FPS figure is likely near the engine’s frame rate cap or the CPU’s practical limit. Even at 4K Low (104.7 FPS), the CPU is still able to feed the GPU enough data to avoid a severe drop, suggesting that Fivem’s server-side code and script processing are the limiting factors rather than the processor’s raw compute power. The CPU’s 30 MB of shared L3 cache and dual-channel DDR4/DDR5 memory support help maintain consistent frame times in crowded in-game areas, which is critical for a multiplayer title.

Settings Recommendations

Based on the measured data, the optimal strategy for this combo is to prioritize the CPU’s strengths while managing the GPU load. For 1080p displays, the Medium preset at 220.7 FPS is the best choice, as it offers a substantial frame rate advantage over High (176.9 FPS) while likely retaining most visual fidelity. For 1440p, the High preset at 118.6 FPS is recommended, as it balances the 90.5 FPS of Ultra with the 148.6 FPS of Medium, providing a smooth experience for high-refresh-rate monitors without sacrificing too much visual detail.

For 4K, the Low preset at 104.7 FPS is the only viable option for consistent 100+ FPS gameplay. The Medium preset at 83.7 FPS is playable, but the drop to 61.6 FPS at High makes that setting less attractive for competitive multiplayer. The Ultra preset is not recommended at any resolution below 1440p, as the 136.1 FPS at 1080p Ultra is only slightly better than the 118.6 FPS at 1440p High, making the higher resolution a better use of the GPU’s capabilities. Ultimately, the data suggests that players should cap their frame rates at the monitor’s refresh rate and adjust the quality preset to maintain a stable frame time, with Medium at 1080p and High at 1440p offering the best overall experience.