Fivem

# Fivem Performance Analysis: Intel Core i7-12700KF + NVIDIA GeForce RTX 3050 4 GB

The combination of the Intel Core i7-12700KF and NVIDIA GeForce RTX 3050 4 GB delivers playable performance in Fivem at 1080p, but the data shows a sharp drop-off at higher resolutions, revealing a system primarily constrained by the GPU. The measured frame rates across twelve resolution and settings combinations indicate that this pair ranks near the bottom of tested configurations, sitting at rank 1609 out of 1792 combos, placing it in the 10th percentile of all tested systems. The CPU's strong multi-threaded capability — with a Cinebench R23 multi-core score of 28979 — cannot compensate for the GPU's limitations at 4K, where even Low settings only reach 41.9 FPS.

Resolution Scaling

The frame rate progression from 1080p to 4K tells a clear story about system balance. At 1920x1080 with Low settings, the system produces 110 FPS, which drops to 71.9 FPS at 2560x1440 (a 34.6% reduction) and further to 41.9 FPS at 3840x2160 (a 61.9% reduction from the 1080p baseline). This scaling pattern is consistent with a GPU-bound scenario — the RTX 3050 4 GB's 192.0 GB/s memory bandwidth and 7.127 TFLOPS of FP32 compute become the limiting factors as pixel count rises.

The High preset shows similar degradation: 70.8 FPS at 1080p, 46.3 FPS at 1440p, and 27 FPS at 4K. The Ultra settings are the most punishing, with 55.8 FPS at 1080p collapsing to 37.4 FPS at 1440p and 22.6 FPS at 4K — the latter being below playable thresholds by most standards. The resolution scaling data indicates that this system is optimized for 1080p gaming; 1440p is possible with Low or Medium settings, while 4K should be avoided entirely, as even the lowest settings fail to maintain 45 FPS.

The gap between Low and Ultra settings widens as resolution increases. At 1080p, the difference between Low and Ultra is 54.2 FPS (110 vs 55.8). At 1440p, this gap narrows to 34.5 FPS (71.9 vs 37.4). At 4K, the difference shrinks to 19.3 FPS (41.9 vs 22.6). This narrowing suggests that at higher resolutions, the GPU's raw throughput becomes the dominant constraint, making settings adjustments less effective at recovering performance.

CPU Role

The Intel Core i7-12700KF brings substantial processing power to this pairing, with 12 cores and 20 threads running at a base clock of 3.60 GHz and boost up to 5.00 GHz. The CPU's benchmark scores are robust — a Passmark multi-thread score of 34092 and a Geekbench single-core score of 2526 — but in Fivem, the data shows that these capabilities are underutilized at higher resolutions. At 4K Ultra, the system produces only 22.6 FPS, which cannot be attributed to CPU limitations given the processor's performance class.

The CPU's 89th percentile ranking against all CPUs confirms its strength, sitting just 0.1% above the Intel Core i5-14400 and 0.2% below the Intel Core i7-13800H in average benchmark scores. The 25 MB of shared L3 cache and 10 nm Alder Lake architecture provide ample headroom for multiplayer game logic and physics, but Fivem's frame rates at 4K suggest the workload shifts almost entirely to the GPU at that resolution. At 1080p Low, the 110 FPS result indicates the CPU can feed the GPU adequately, but the GPU's 4 GB VRAM and 128-bit memory bus become the bottleneck as settings and resolution increase.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Fivem?

A: The data clearly shows 1920x1080 as the optimal resolution. The system achieves 70.8 FPS at High settings and 110 FPS at Low settings, while 1440p drops to 46.3 FPS at High and 4K falls to 27 FPS at High.

Q: Can this system handle Ultra settings at any resolution?

A: Ultra settings are only viable at 1080p, where the system produces 55.8 FPS. At 1440p, Ultra drops to 37.4 FPS, and at 4K it falls to 22.6 FPS — both below smooth playability thresholds.

Q: How does the CPU compare to its nearest rivals?

A: The Core i7-12700KF scores 35355 on average, which is 0.1% above the Core i5-14400 (35336), 0.2% above the Core i9-12900HX (35289), and 0.3% above the Core i5-13600T (35256). It trails the Core i7-13800H by 0.2% (35416).

Q: Is the GPU the limiting factor at 4K resolution?

A: Yes. The frame rates at 3840x2160 range from 22.6 FPS (Ultra) to 41.9 FPS (Low), with the RTX 3050 4 GB's 192.0 GB/s bandwidth and 90 W TDP proving insufficient for 4K gaming in Fivem.

Q: What settings provide the best balance of quality and performance?

A: Medium settings at 1080p (89.8 FPS) or High at 1080p (70.8 FPS) offer the best experience. Both are above 60 FPS, and the visual quality difference between Medium and High is minimal compared to the performance trade-off.

Q: How does this combo rank among all tested systems?

A: It ranks 1609 out of 1792 tested combos, placing it in the bottom 10% of configurations. This indicates the pairing is below average for Fivem performance.

How This Combo Ranks

The combo rank of 1609 out of 1792 places this system in the 10th percentile of all tested configurations, indicating below-average performance for Fivem. This low ranking is primarily attributable to the GPU's limitations — the RTX 3050 4 GB sits at the 50th percentile among all GPUs, while the CPU performs at the 89th percentile. The imbalance between the two components is stark: the processor is a top-tier performer, but the graphics card holds the system back, particularly at higher resolutions.

This ranking suggests that users seeking better Fivem performance should prioritize a GPU upgrade over a CPU change. The Core i7-12700KF's benchmark scores are already competitive with newer processors like the Core i5-14400 and Core i7-13800H, so the CPU is unlikely to be the bottleneck in most scenarios. The data shows that at 1080p Low, the system can achieve 110 FPS, which is respectable, but the 4K results (22.6 to 41.9 FPS) drag the overall ranking down significantly.

Settings Recommendations

The measured data points to Medium settings at 1920x1080 as the optimal configuration for this system. At 89.8 FPS, this preset delivers smooth gameplay while maintaining visual quality above the minimum. For users prioritizing frame rate, Low settings at 1080p provide 110 FPS — a 22.5% improvement over Medium — but with noticeably reduced visual fidelity. High settings at 1080p (70.8 FPS) are acceptable for users who prefer better visuals and can tolerate frame rates slightly above 60 FPS.

At 2560x1440, the only viable options are Low (71.9 FPS) or Medium (60.9 FPS). High settings at 1440p produce 46.3 FPS, which may be playable for some but falls below the 60 FPS threshold. Ultra settings are not recommended at any resolution: 55.8 FPS at 1080p is the best Ultra result, but the visual gains over High are marginal while the performance cost is substantial. At 4K, no settings preset achieves playable frame rates, so users should avoid this resolution entirely.

Measured FPS Breakdown

At 1920x1080, the system produces 110 FPS on Low, 89.8 FPS on Medium, 70.8 FPS on High, and 55.8 FPS on Ultra. These numbers show a steady decline of approximately 20 FPS per settings tier, with the gap between Low and Ultra representing a 49.3% performance loss. The 1080p results are the only resolution where all presets remain above 50 FPS.

At 2560x1440, performance drops to 71.9 FPS on Low, 60.9 FPS on Medium, 46.3 FPS on High, and 37.4 FPS on Ultra. The scaling from Low to Ultra at 1440p shows a 48% reduction in frame rate, similar to 1080p, but the absolute numbers are lower across the board. At 3840x2160, the results are 41.9 FPS on Low, 32.1 FPS on Medium, 27 FPS on High, and 22.6 FPS on Ultra. The 4K Low result is the only one above 30 FPS, and it still falls short of smooth playability.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the primary constraint in this system. With 4 GB of GDDR6 memory on a 128-bit bus providing 192.0 GB/s bandwidth, the GPU's capacity is limited for modern multiplayer titles like Fivem. The GA107 chip, built on an 8 nm process, features 2048 shading units, 64 TMUs, and 32 ROPs, with boost clock of 1740 MHz. The 90 W TDP and 250 W suggested PSU requirement indicate an entry-level power profile that aligns with its performance class.

The GPU's percentile ranking of 50 places it exactly at the median of all GPUs, which explains the system's overall below-average combo ranking. The 4 GB VRAM capacity is particularly problematic at higher resolutions, where texture data exceeds available memory, causing performance degradation. The data shows that the GPU's 7.127 TFLOPS FP32 performance is sufficient for 1080p gaming but insufficient for 1440p and 4K in Fivem. The 16 RT cores and 64 tensor cores are present but provide no measurable benefit in this title, as the frame rates at 4K (22.6 to 41.9 FPS) indicate the GPU is fully saturated at all settings.