Fivem

Fivem

AVERAGE FPS
55
playable

This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 27 32 40
1440p QHD 34 47 57 76
1080p Full HD 55 74 91 113

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 40
3840x2160 Medium 32
3840x2160 High 27
3840x2160 Ultra 20
2560x1440 Low 76
2560x1440 Medium 57
2560x1440 High 47
2560x1440 Ultra 34
1920x1080 Low 113
1920x1080 Medium 91
1920x1080 High 74
1920x1080 Ultra 55

Fivem with AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

Fivem presents a demanding workload for the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 3050 4 GB combination, with benchmark results showing a clear progression from playable frame rates at 1080p to a slideshow at 4K. The data indicates that this pairing is heavily constrained by the graphics card, especially as resolution increases, but the CPU’s strong multi-threaded performance ensures that the processor is rarely the bottleneck.

Resolution Scaling

The measured frame rates demonstrate a steep decline as resolution climbs from 1920x1080 to 3840x2160, a pattern that points directly at the GPU as the limiting component. At Low settings, the average FPS drops from 113.1 at 1080p to 76.1 at 1440p, a reduction of roughly 33%, and then falls further to 39.7 at 4K, which is only 35% of the 1080p figure. This scaling curve is typical for a graphics card with a 128-bit memory bus and 192.0 GB/s of bandwidth, where pixel throughput at higher resolutions becomes the dominant constraint.

The same trend holds across all quality presets. At High settings, the average drops from 73.7 FPS at 1080p to 47.1 at 1440p, and then to 26.6 at 4K. Medium settings show 90.6 FPS at 1080p, 57 at 1440p, and 32.2 at 4K. Ultra settings are the most punishing, with averages of 54.8 FPS at 1080p, 33.7 at 1440p, and just 20.4 at 4K. The consistent pattern across presets confirms that Fivem’s rendering load at higher resolutions overwhelms the RTX 3050’s capabilities, while the CPU’s performance headroom remains untapped.

The data suggests that at 1080p, the combination can deliver smooth gameplay at Low and Medium presets, but at 1440p and above, the frame rates fall below the 60 FPS threshold for most settings. The gap between Low and Ultra at 4K is particularly telling: 39.7 FPS versus 20.4 FPS, a difference of nearly 2x, which shows that the GPU is working at its absolute limit when pushed to maximum quality. This resolution scaling behavior indicates that users targeting 1440p or 4K will need to make significant compromises in visual fidelity to maintain acceptable performance.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the primary performance limiter in this configuration, and its specifications explain the measured results. With a base clock of 1545 MHz and a boost clock of 1740 MHz, the GPU offers modest compute power, delivering 7.127 TFLOPS of FP32 throughput. The 4 GB of GDDR6 memory on a 128-bit bus provides 192.0 GB/s of bandwidth, which is sufficient for 1080p gaming but becomes a bottleneck at higher resolutions where texture data and frame buffers demand more memory capacity.

The 4 GB VRAM capacity is a critical factor in Fivem’s performance at 1440p and 4K. At Ultra settings, the average frame rates of 33.7 FPS at 1440p and 20.4 FPS at 4K suggest that the GPU is running out of memory, forcing the system to swap data and causing stutters. The RTX 3050’s 2048 shading units and 32 ROPs are also relatively limited for a modern game, and the 55.68 GPixel/s pixel rate becomes a constraint when rendering at 3840x2160. The GPU’s 90 W TDP and dual-slot design indicate a power-efficient but not high-performance part, and the measured data reflects this.

The benchmark results show that the GPU’s performance scales predictably with settings. At 1080p, the difference between Low (113.1 FPS) and Ultra (54.8 FPS) is a 2x drop, while at 4K, the same comparison goes from 39.7 FPS to 20.4 FPS. This suggests that the GPU is not only bandwidth-limited but also compute-limited, as the higher quality presets demand more shader work and memory bandwidth. The RTX 3050’s 64 tensor cores and 16 RT cores do not provide significant benefits in Fivem, which appears to rely primarily on traditional rasterization.

CPU Role

The AMD Ryzen 7 7800X3D provides ample processing power for Fivem, and the benchmark data indicates that it is not the limiting factor in this configuration. The CPU features 8 cores and 16 threads based on the Zen 4 architecture, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. Its 96 MB of shared L3 cache is particularly beneficial for multiplayer scenarios, where large amounts of data need to be accessed quickly. The CPU’s benchmark scores, including a Cinebench R23 multi-core score of 29149 and a single-core score of 4115, place it in the 87th percentile of all CPUs, suggesting strong performance across both single-threaded and multi-threaded workloads.

In Fivem, the CPU’s role is to handle game logic, physics, and AI, which are often more demanding in multiplayer environments due to the larger number of entities. The 7800X3D’s 3D V-Cache technology, which provides the 96 MB L3 cache, helps reduce latency when accessing frequently used data. The measured frame rates at 1080p, where the GPU is less stressed, show that the CPU can drive the RTX 3050 to its limits: at Low settings, the average FPS reaches 113.1, which is close to the GPU’s theoretical maximum. This indicates that the CPU is not holding back the GPU at lower resolutions.

The CPU’s 16 threads and 8 cores are well-suited for Fivem’s multi-threaded nature, and the data shows that even at 4K, where the GPU is the primary bottleneck, the CPU maintains consistent performance. The gap between the 7800X3D and its nearest rivals, including the Intel Core i7-12700F (0.1% difference in average score) and AMD Ryzen 9 5980HX (0.3% difference), is negligible, meaning that any of these CPUs would perform similarly in Fivem. The CPU’s 120 W TDP and PCIe Gen 5 support with 24 lanes provide ample bandwidth for the GPU, but the RTX 3050’s PCIe 4.0 x8 interface is not a limitation in this scenario.

How This Combo Ranks

The combination of the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 3050 4 GB ranks 1614 out of 1792 tested combos in Fivem, placing it in the bottom 10% of all configurations. This low ranking is primarily due to the GPU’s limited performance, as the CPU is a high-end part that would typically be paired with a much more powerful graphics card. The data shows that the combo’s average frame rates at 1080p are competitive with mid-range systems, but the GPU’s 4 GB VRAM and limited bandwidth cause significant drops at higher resolutions.

Compared to other tested combos, this pairing suffers from a mismatch in capabilities. The CPU’s 87th percentile ranking among all CPUs suggests it is one of the best processors available, but the GPU’s 50th percentile ranking means it is only average among graphics cards. This imbalance is reflected in the measured FPS, where the combo fails to maintain 60 FPS at 1440p on any preset, and only achieves smooth performance at 1080p on Low and Medium settings. The rank of 1614 out of 1792 indicates that most other combinations, even those with weaker CPUs, outperform this pairing in Fivem due to their more balanced GPU selection.

The benchmark results show that the combo’s performance is heavily dependent on resolution and settings. At 1080p Low, the 113.1 FPS average is respectable, but at 4K Ultra, the 20.4 FPS average is nearly unplayable. This wide performance range suggests that the combo is only suitable for 1080p gaming, and even then, users must be selective about quality settings. The rank in the bottom 10% highlights that this is not a recommended configuration for Fivem, despite the CPU’s excellent performance.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution. At 1920x1080, the Medium preset provides the best balance of visual quality and performance, with an average FPS of 90.6, which is well above the 60 FPS threshold for smooth gameplay. The High preset at 1080p delivers 73.7 FPS, which is also playable, but the drop from Medium to High is noticeable (90.6 to 73.7 FPS), suggesting that the extra visual fidelity may not be worth the performance cost. The Low preset at 1080p achieves 113.1 FPS, which is excellent for competitive play, but the visual downgrade may be too severe for most users. The Ultra preset at 1080p, with 54.8 FPS, falls below the 60 FPS target and should be avoided.

At 2560x1440, the Low preset is the only viable option, with an average FPS of 76.1, which is playable but not ideal. The Medium preset at 1440p drops to 57 FPS, which is borderline, and the High preset at 47.1 FPS is too low for smooth gameplay. The Ultra preset at 1440p, with 33.7 FPS, is not recommended. At 3840x2160, all presets deliver sub-40 FPS averages, with the Low preset at 39.7 FPS being the highest. This makes 4K gaming impractical with this combo, even at the lowest settings.

For the best experience, users should target 1080p with Medium settings, which provides an average FPS of 90.6 and good visual quality. If higher frame rates are preferred, the Low preset at 1080p offers 113.1 FPS, but with reduced graphics. At 1440p, the Low preset is the only option that maintains playable frame rates above 60 FPS, while at 4K, the combo is not suitable for any settings.

Measured FPS Breakdown

The complete FPS data for this combo across all resolutions and settings is as follows:

At 1920x1080, the Low preset delivers an average FPS of 113.1, the highest of any tested configuration. The Medium preset achieves 90.6 FPS, the High preset achieves 73.7 FPS, and the Ultra preset achieves 54.8 FPS. This shows a consistent decline of approximately 20 FPS between each preset level, with the difference between Low and Ultra being 58.3 FPS.

At 2560x1440, the Low preset delivers an average FPS of 76.1, which is a significant drop from the 1080p Low result. The Medium preset achieves 57 FPS, the High preset achieves 47.1 FPS, and the Ultra preset achieves 33.7 FPS. The gap between Low and Ultra at this resolution is 42.4 FPS, indicating that the GPU is struggling with the increased pixel count.

At 3840x2160, the Low preset delivers an average FPS of 39.7, the Medium preset achieves 32.2 FPS, the High preset achieves 26.6 FPS, and the Ultra preset achieves 20.4 FPS. The difference between Low and Ultra at this resolution is 19.3 FPS, which is the smallest absolute gap across all resolutions, but the frame rates are so low that even the best preset is not playable.

The data shows that the combo’s performance degrades by roughly 50% when moving from 1080p to 1440p and by another 50% when moving from 1440p to 4K, at the same settings. This consistent halving of frame rates with each resolution increase confirms that the GPU is the primary constraint, and the CPU’s performance remains constant across all resolutions. The measured FPS values provide a clear picture of this combo’s limitations and its suitability only for 1080p gaming at medium or lower settings.

Hardware Specifications

AMD Ryzen 7 7800X3D

Cores / Threads 8 / 16
Base Clock 4200 MHz
Boost Clock 5000 MHz
TDP 120W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 3050 4 GB in Fivem

Resolution Settings Avg FPS
3840x2160 Low 39.7
3840x2160 Medium 32.2
3840x2160 High 26.6
3840x2160 Ultra 20.4
2560x1440 Low 76.1
2560x1440 Medium 57.0
2560x1440 High 47.1
2560x1440 Ultra 33.7
1920x1080 Low 113.1
1920x1080 Medium 90.6
1920x1080 High 73.7
1920x1080 Ultra 54.8

Fivem with RTX 3050 4 GB + Other CPUs

See how Fivem performs with the same GPU but different processors.

Other Games with Ryzen 7 7800X3D + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.