Fivem

Fivem

AVERAGE FPS
128
excellent

This combination delivers exceptional performance with an average of 128 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 62 74 94
1440p QHD 86 109 135 171
1080p Full HD 130 163 204 258

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 94
3840x2160 Medium 74
3840x2160 High 62
3840x2160 Ultra 47
2560x1440 Low 171
2560x1440 Medium 135
2560x1440 High 109
2560x1440 Ultra 86
1920x1080 Low 258
1920x1080 Medium 204
1920x1080 High 163
1920x1080 Ultra 130

Fivem with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis

The data for Fivem with the AMD Ryzen 9 5950X and NVIDIA GeForce RTX 3080 Ti reveals a system where performance is highly contingent on both resolution and graphical presets. The measured frame rates show a clear hierarchy of scaling across the three tested resolutions, with the gap between the lowest and highest settings widening as resolution decreases. This configuration demonstrates a strong balance, though the specific bottlenecks shift depending on the workload.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 produces a substantial impact on average frame rates across all settings. At High settings, the system delivers 162.7 FPS at 1080p, which drops to 109 FPS at 1440p, and further down to 61.8 FPS at 4K. This represents a 62% reduction in performance from 1080p to 4K, indicating that the GPU is the primary limiting factor as pixel count increases. The scaling pattern is consistent across other presets, with Low settings showing the largest absolute drop from 258.1 FPS at 1080p to 94 FPS at 4K.

The data suggests that at 1080p, the CPU has more headroom to push frame rates, as evidenced by the massive 258.1 FPS result at Low settings. This high ceiling implies that the processor is capable of feeding the GPU adequately at lower resolutions, but the graphics card becomes the binding constraint when moving to 4K. The 1440p results sit in a comfortable middle ground, with High settings delivering 109 FPS, which is a more balanced operating point for this hardware combination. The Ultra preset at 4K, yielding only 46.5 FPS, shows the steepest performance penalty, underscoring that this resolution/settings combination is too demanding for consistent smoothness.

Settings Recommendations

Based on the measured rows, the Medium preset offers the most compelling balance between visual quality and performance. At 2560x1440, Medium produces 135.3 FPS, which is a 24% improvement over High’s 109 FPS while still maintaining a playable experience. At 1920x1080, Medium achieves 203.8 FPS, which is close to the refresh rate capabilities of most high-end monitors and only 54 FPS behind Low’s 258.1 FPS. The jump from Medium to High at 1080p costs 41.1 FPS, a noticeable decrease that many players might find unnecessary for the incremental visual gain.

For 4K gaming, High settings at 61.8 FPS is the recommended choice, as it stays above the 60 FPS threshold for smooth gameplay. Ultra at this resolution drops to 46.5 FPS, which could introduce noticeable stutter in a multiplayer environment like Fivem. Conversely, Low settings at any resolution provide the highest frame rates but sacrifice too much visual fidelity. The data indicates that Medium at 1440p is the sweet spot for this combo, offering 135.3 FPS with a good balance of detail and fluidity, while High at 4K remains viable for those prioritizing resolution over frame rate.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, with a base clock of 3.40 GHz and a boost clock of 4.90 GHz. Its benchmark scores are robust, with a Cinebench R23 multicore result of 38607 and a single-core score of 5450. The processor’s PassMark multithread score of 45424 places it in the 93rd percentile of all CPUs, showing strong general-purpose performance. However, its nearest rivals in average benchmark score include the Intel Core i5-14600K with a delta of -0.2% and the AMD EPYC 4345P at -1.1%, indicating that the 5950X is just slightly behind these newer parts in synthetic tests.

In Fivem, the CPU’s role becomes more apparent at lower resolutions. The 1080p Low preset result of 258.1 FPS suggests that the processor can handle the game’s simulation and network logic without becoming a bottleneck. The 3DMark scores tell a similar story, with 16-thread performance at 10810 and single-thread at 944, showing that the CPU has both high multi-threaded capability and adequate single-core speed for gaming. The 64 MB of L3 cache likely helps with the large, open-world environments typical of Fivem, reducing latency when accessing frequently used data.

How This Combo Ranks

In the overall database of tested combinations, this specific pairing of the Ryzen 9 5950X and RTX 3080 Ti ranks 431 out of 1792 combos for Fivem. This places it in the top 24% of all tested systems, which is a strong result for a game that is often more dependent on server performance and network conditions than pure hardware. The rank reflects the balanced nature of this setup, where neither component severely bottlenecks the other in most scenarios.

The position suggests that while this combo is not at the absolute top tier for Fivem, it outperforms a significant majority of systems. The data indicates that higher-ranking combos likely feature newer generation GPUs with better ray tracing or DLSS capabilities, but this pairing still delivers excellent raw performance. The 83rd percentile ranking for the GPU and 93rd for the CPU show that both components are individually strong, yet the game’s engine may not fully exploit the CPU’s 32 threads, keeping the combo from climbing higher.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is built on the Ampere architecture with 10240 shading units and 80 RT cores. Its memory configuration includes 12 GB of GDDR6X on a 384-bit bus, providing 912.4 GB/s of bandwidth. The boost clock of 1665 MHz, combined with 34.10 TFLOPS of FP32 performance, makes this a high-end card for its generation. In synthetic benchmarks, it scores 26896 in PassMark G3D and 191309 in Geekbench OpenCL, with a percentile rank of 83 against all GPUs.

The GPU’s influence is most pronounced at 4K resolution. The drop from 94 FPS at Low to 61.8 FPS at High and 46.5 FPS at Ultra demonstrates that the graphics card is the limiting factor when pixel throughput demands increase. The 12 GB VRAM is sufficient for Fivem at these settings, as the game’s asset streaming is not particularly memory-hungry compared to AAA single-player titles. The RTX 3080 Ti’s nearest rival in average score is the RTX 3090 with a delta of -0.5%, showing that this card performs nearly identically to its bigger sibling in general benchmarks, though the 3090’s additional memory might offer advantages in other titles. For Fivem, the 3080 Ti provides ample headroom for 1440p and 4K gaming, with the 1440p High result of 109 FPS being particularly notable for its smoothness.

Hardware Specifications

AMD Ryzen 9 5950X

Cores / Threads 16 / 32
Base Clock 3400 MHz
Boost Clock 4900 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3080 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 1665 MHz MHz
TDP 350 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 9 5950X + NVIDIA GeForce RTX 3080 Ti in Fivem

Resolution Settings Avg FPS
3840x2160 Low 94.0
3840x2160 Medium 74.3
3840x2160 High 61.8
3840x2160 Ultra 46.5
2560x1440 Low 170.9
2560x1440 Medium 135.3
2560x1440 High 109.0
2560x1440 Ultra 86.0
1920x1080 Low 258.1
1920x1080 Medium 203.8
1920x1080 High 162.7
1920x1080 Ultra 130.1

Fivem with Ryzen 9 5950X + Other GPUs

See how Fivem performs with the same CPU but different graphics cards.

Fivem with RTX 3080 Ti + Other CPUs

See how Fivem performs with the same GPU but different processors.

Other Games with Ryzen 9 5950X + RTX 3080 Ti

Explore FPS benchmarks for other games using this same hardware combination.