Doom

Doom

AVERAGE FPS
115
good

This combination provides smooth gameplay with an average of 115 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 56 64 73
1440p QHD 87 101 122 138
1080p Full HD 129 160 188 219

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 73
3840x2160 Medium 64
3840x2160 High 56
3840x2160 Ultra 46
2560x1440 Low 138
2560x1440 Medium 122
2560x1440 High 101
2560x1440 Ultra 87
1920x1080 Low 219
1920x1080 Medium 188
1920x1080 High 160
1920x1080 Ultra 129

Doom with AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis

The AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1080 Ti combination ranks 1005 out of 1681 tested combos in Doom. This places it in the lower-middle portion of the database, a position that reflects the pairing of a modern, capable processor with an older, high-end graphics card. The rank suggests that while this combo is far from the top of the charts, it remains entirely playable, with the limiting factor being the GPU rather than the CPU. The data shows a system that delivers solid frame rates at most settings, but one that will not challenge the best-performing configurations in this specific title.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and the NVIDIA GeForce GTX 1080 Ti achieves a rank of 1005 out of 1681 tested combos in Doom. This percentile position indicates that roughly 40% of tested configurations deliver higher average frame rates, while a significant majority of systems perform worse. The ranking is heavily influenced by the GPU’s age, as the GTX 1080 Ti, while once a flagship, now sits in the 61st percentile against all GPUs. The CPU, in contrast, is much stronger, ranking in the 82nd percentile against all CPUs. This disparity in component strength directly explains the combo’s overall position, as the GPU becomes the bottleneck in most scenarios, preventing the CPU from fully expressing its potential.

Compared to its direct rivals, the CPU’s average benchmark score of 24993 is nearly identical to the Intel Core i7-11850H, which scores 24974 (a delta of 0.1%). It is also within a fraction of a percent of the AMD Ryzen 7 2700X and the AMD Ryzen 5 8400F, both of which post scores around 25057 and 25064 respectively. The GPU’s average score of 19402 is similarly close to its nearest rival, the NVIDIA GeForce GTX 780, which scores 19405. This tight grouping of scores confirms that the combo’s performance is consistent with its hardware class, but it does not break any new ground in the Doom benchmark hierarchy.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. It features 32 MB of shared L3 cache and supports DDR5 memory on the AMD Socket AM5 platform. In Doom, a game that is not particularly demanding on CPU resources, this processor provides ample headroom. The benchmark results show that the CPU’s multi-threaded capabilities are strong, with a Cinebench R23 multi-core score of 22799 and a Geekbench multi-core score of 12686. These figures indicate that the CPU can easily handle the game’s simulation and AI tasks without becoming a limiting factor.

The single-thread performance is also robust, with a Cinebench R23 single-core score of 3218 and a Passmark single-thread score of 3841. Doom’s engine benefits from strong single-core performance, and the Ryzen 5 7500F delivers this in abundance. The data suggests that at lower resolutions, where the GPU is less stressed, the CPU is more than capable of feeding the graphics card with enough data to maintain high frame rates. However, the CPU’s percentile rank of 82 against all CPUs, compared to the GPU’s 61, indicates that the processor is the stronger component in this pairing. In practical terms, this means that the CPU will rarely be the cause of frame rate drops; instead, the GPU will dictate overall performance.

GPU Role

The NVIDIA GeForce GTX 1080 Ti is a Pascal-architecture GPU with 11 GB of GDDR5X memory on a 352-bit bus, providing a memory bandwidth of 484.4 GB/s. Its base clock is 1481 MHz with a boost clock of 1582 MHz, and it offers 3584 shading units. Despite its age, this card remains a capable performer, as evidenced by its Passmark G3D score of 18600. In Doom, the GPU is the primary determinant of frame rates, especially at higher resolutions and settings. The card’s 11 GB of VRAM is sufficient for the game’s textures, and the high memory bandwidth helps maintain smooth performance.

The GPU’s benchmark results show a mixed picture. Its DirectX 11 score of 151 is modest, while its Vulkan score of 83108 is strong, which is relevant because Doom’s Vulkan path is known to be more efficient. The GPU’s FP32 performance of 11.34 TFLOPS is substantial, but the card’s age shows in its power consumption of 250 W and its lack of modern features like ray tracing. In this combo, the GTX 1080 Ti acts as the bottleneck, particularly at 4K resolution, where its performance drops significantly. The data indicates that while the GPU can handle 1080p and 1440p with ease, it struggles to maintain high frame rates at 4K with maximum settings.

Measured FPS Breakdown

The measured FPS data for this combo in Doom shows a clear progression based on resolution and settings. At 1080p, the performance is excellent across the board. With Low settings, the average FPS is 218.7, which drops slightly to 188 at Medium, 160.1 at High, and 129.4 at Ultra. These numbers indicate that the combo is well-suited for high-refresh-rate 1080p gaming, with even Ultra settings delivering over 120 FPS. The GPU’s 11 GB of VRAM and high bandwidth are more than sufficient for this resolution.

Moving to 1440p, the frame rates remain very playable but show a noticeable decrease. Low settings yield an average of 138.2 FPS, Medium drops to 121.9, High to 101.1, and Ultra to 87.1. The transition from 1080p to 1440p results in a roughly 35-40% drop in FPS across settings, which is expected given the increased pixel count. At this resolution, the combo still offers a smooth experience, particularly at High settings, which remain above the 100 FPS mark. The data suggests that 1440p is the sweet spot for this combo, balancing visual quality with performance.

At 4K, the limitations of the GTX 1080 Ti become apparent. Ultra settings produce an average of only 45.7 FPS, which is below the 60 FPS target most gamers prefer. High settings improve this to 56.2 FPS, while Medium and Low yield 63.8 and 73.3 FPS respectively. The drop from 1440p to 4K is substantial, with frame rates falling by roughly 45-50% at each setting level. This indicates that the GPU is heavily stressed at 4K, and the combo is not ideal for this resolution unless the user is willing to compromise on settings.

Resolution Scaling

The scaling of FPS from 1080p to 4K provides clear insight into which component is the limiting factor. From 1080p Ultra (129.4 FPS) to 1440p Ultra (87.1 FPS), the frame rate drops by 32.7%. The subsequent jump from 1440p Ultra to 4K Ultra (45.7 FPS) results in a further 47.5% decrease. This pattern is consistent across all settings, with the percentage drop increasing as resolution rises. For example, at High settings, the drop from 1080p (160.1 FPS) to 1440p (101.1 FPS) is 36.9%, and from 1440p to 4K (56.2 FPS) is 44.4%.

These scaling patterns point directly to the GPU as the limiting component. If the CPU were the bottleneck, the frame rate drops would be less severe at higher resolutions, as the GPU would have more time to render each frame. Instead, the data shows that the GPU’s rendering capabilities are being saturated at 4K, leading to significant FPS reductions. The CPU’s strong performance, with its high single-core and multi-core scores, ensures that it is not the constraint. The evidence is clear: to achieve higher frame rates at 4K, a more powerful GPU would be necessary, while the Ryzen 5 7500F would continue to provide adequate support. The combo is best suited for 1080p and 1440p gaming, where it delivers excellent performance, but it falls short of the smooth 4K experience that more modern GPUs can provide.

Hardware Specifications

AMD Ryzen 5 7500F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 5000 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce GTX 1080 Ti

VRAM 11 GB GDDR5X
Base Clock —
Boost Clock 1582 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1080 Ti in Doom

Resolution Settings Avg FPS
3840x2160 Low 73.3
3840x2160 Medium 63.8
3840x2160 High 56.2
3840x2160 Ultra 45.7
2560x1440 Low 138.2
2560x1440 Medium 121.9
2560x1440 High 101.1
2560x1440 Ultra 87.1
1920x1080 Low 218.7
1920x1080 Medium 188.0
1920x1080 High 160.1
1920x1080 Ultra 129.4

Doom with Ryzen 5 7500F + Other GPUs

See how Doom performs with the same CPU but different graphics cards.

Doom with GTX 1080 Ti + Other CPUs

See how Doom performs with the same GPU but different processors.

Other Games with Ryzen 5 7500F + GTX 1080 Ti

Explore FPS benchmarks for other games using this same hardware combination.