Fivem

# Fivem with AMD Ryzen 5 5600F + NVIDIA GeForce RTX 3080 Ti

This combo pairs AMD's Ryzen 5 5600F, a 6-core/12-thread Zen 3 processor with a base clock of 3.00 GHz and boost up to 4.00 GHz, with NVIDIA's GeForce RTX 3080 Ti, an Ampere-architecture GPU featuring 12 GB of GDDR6X memory on a 384-bit bus. The measured FPS data across three resolutions and four quality presets shows a system that is heavily GPU-limited at higher settings but capable of extreme frame rates when the load shifts to the CPU. The combo ranks 772nd out of 3005 tested combinations, placing it in the upper quartile of all systems tested for Fivem.

Settings Recommendations

The measured FPS rows reveal a clear pattern: Fivem responds dramatically to settings changes, and the sweet spot depends on your target resolution. At 1080p, the Low preset delivers 247 FPS average, while Medium drops to 204 FPS, High to 163 FPS, and Ultra to 127 FPS. The gap between Low and Ultra is 120 FPS, which is substantial for competitive play. However, even at Ultra, the 127 FPS average exceeds the refresh rate of most standard 60 Hz and 144 Hz monitors, making Ultra a viable choice for 1080p users who prioritize visual fidelity over raw speed.

At 1440p, the scaling shifts. Low delivers 171 FPS, Medium 135 FPS, High 108 FPS, and Ultra 84 FPS. The Medium preset with its measured range of 114 to 155 FPS provides the best balance for high-refresh 1440p monitors, as it stays above 114 FPS at all times. High falls below 108 FPS average, which may be borderline for 144 Hz displays, while Ultra at 84 FPS is better suited for 60 Hz panels. For most 1440p users, Medium is the recommended preset—it offers a 27 FPS advantage over High while maintaining a solid minimum of 114 FPS.

At 4K, the picture changes completely. Low delivers 95 FPS, Medium 75 FPS (with a minimum of 63 FPS), High 60 FPS, and Ultra drops to 46 FPS. The Medium preset at 4K is the only one that maintains a playable minimum above 60 FPS, with its 63 FPS floor. High at exactly 60 FPS average leaves no headroom for dips, and Ultra at 46 FPS is borderline unplayable for smooth gameplay. For 4K users, Medium is the clear recommendation—it provides a 15 FPS advantage over High and a 29 FPS advantage over Ultra, while keeping the minimum above 60 FPS.

Across all resolutions, the Medium preset consistently offers the best balance of performance and visual quality. The data shows diminishing returns beyond Medium, with High and Ultra providing smaller visual gains for increasingly larger FPS losses. For competitive play at any resolution, Low is the fastest option, but Medium is the practical sweet spot for most users.

GPU Role

The RTX 3080 Ti's specifications explain much of its behavior in Fivem. With 12 GB of GDDR6X memory and 912.4 GB/s of bandwidth, the GPU has ample resources for high-resolution textures and effects. The 10240 shading units, 320 TMUs, and 112 ROPs provide substantial raw throughput, with a pixel rate of 186.5 GPixel/s and a texture rate of 532.8 GTexel/s. The boost clock of 1665 MHz, while not extreme, is sufficient to drive these resources effectively.

The GPU's role becomes apparent when examining the FPS scaling from 1080p to 4K. At Low settings, the FPS drops from 247 at 1080p to 171 at 1440p (a 31% reduction) and then to 95 at 4K (a 44% further reduction). This scaling indicates that at Low settings, the CPU is the primary limiter at 1080p, but the GPU takes over as resolution increases. At Ultra settings, the FPS drops from 127 at 1080p to 84 at 1440p (a 34% reduction) and then to 46 at 4K (a 45% further reduction). The similar percentage drops across settings suggest that the GPU is consistently the limiting factor at higher resolutions, regardless of quality preset.

The RTX 3080 Ti's 3DMark Steel Nomad DX12 score of 5077 and PassMark G3D score of 26896 indicate strong DirectX 12 performance, which is relevant for Fivem's modern rendering pipeline. The GPU's 34.10 TFLOPS FP32 performance and 80 RT cores provide ample compute for the game's workloads. The 83rd percentile ranking among all GPUs places it well above average, though not at the very top tier. The nearest rivals—AMD Radeon Pro 5300 (0.8% slower), NVIDIA Tesla M40 24 GB (1.2% faster), and NVIDIA GeForce RTX 5070 (2% slower)—show that the RTX 3080 Ti is closely matched with a range of other high-end cards, with differences of only a few percent.

How This Combo Ranks

The combo ranks 772nd out of 3005 tested combinations in Fivem, placing it in the 74th percentile of all systems tested. This is a strong result, indicating that this pairing delivers above-average performance for the game. The ranking reflects the combination of the Ryzen 5 5600F's solid CPU performance and the RTX 3080 Ti's high-end GPU capabilities.

The CPU's average benchmark score of 36945 places it in the 85th percentile of all CPUs, with nearest rivals including the Intel Core Ultra 5 225 (0% difference), AMD Ryzen 5 5500X3D (0.2% faster), AMD Ryzen AI 7 PRO 450 (0.4% faster), and Intel Core i9-12900T (0.5% faster). These tiny deltas indicate that the 5600F is essentially performance-equivalent to a range of modern mid-range and high-end CPUs. The GPU's average benchmark score of 41187 places it in the 83rd percentile of all GPUs, with nearest rivals showing differences of less than 2% in either direction.

The combo's rank of 772 out of 3005 means that roughly 74% of tested systems perform worse, while 26% perform better. This is a solid position for a system that pairs a mid-range CPU with a high-end GPU. The data suggests that the RTX 3080 Ti is the dominant component in this pairing, and the 5600F is sufficient to feed it without becoming a significant bottleneck at most settings and resolutions.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 1440p with Medium settings provides 135 FPS average with a minimum of 114 FPS, which is ideal for high-refresh monitors. At 1080p, Medium delivers 204 FPS, but 1440p offers a better balance of visual quality and performance. 4K is playable but only at Medium settings (75 FPS average, 63 FPS minimum).

Q: How does the Ryzen 5 5600F compare to its nearest CPU rivals?

A: The 5600F scores 36945 in the average benchmark, which is within 0.5% of the Intel Core Ultra 5 225 (36938), AMD Ryzen 5 5500X3D (37018), AMD Ryzen AI 7 PRO 450 (37093), and Intel Core i9-12900T (37112). These differences are negligible for gaming performance.

Q: Is the RTX 3080 Ti still competitive in 2025?

A: The GPU scores 41187 in the average benchmark and ranks in the 83rd percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 5070, is only 2% slower, indicating that the 3080 Ti remains competitive with current-generation hardware.

Q: What settings should I use for 4K gaming?

A: The Medium preset is the only 4K option with a minimum above 60 FPS, delivering 75 FPS average with a 63 FPS floor. Low provides 95 FPS but sacrifices visual quality, while High (60 FPS) and Ultra (46 FPS) are too close to or below the 60 FPS threshold for smooth gameplay.

Q: Is this combo CPU-limited or GPU-limited in Fivem?

A: At 1080p Low, the 247 FPS result suggests CPU limitation, as the GPU is capable of much higher frame rates. As resolution increases to 1440p and 4K, the GPU becomes the limiting factor, with FPS scaling closely matching the resolution's pixel count increase.

Q: How does the combo rank overall for Fivem?

A: The combo ranks 772nd out of 3005 tested combinations, placing it in the upper quartile of all systems. This is a strong result, with roughly 74% of tested systems performing worse in Fivem.

Resolution Scaling

The FPS data reveals how the system scales across resolutions, providing insight into which component is the bottleneck. From 1080p to 1440p, the FPS drops by 31% at Low (247 to 171), 34% at Medium (204 to 135), 34% at High (163 to 108), and 34% at Ultra (127 to 84). These consistent percentage drops across settings indicate that the GPU is becoming the limiting factor at 1440p, regardless of quality preset.

From 1440p to 4K, the FPS drops by 44% at Low (171 to 95), 44% at Medium (135 to 75), 44% at High (108 to 60), and 45% at Ultra (84 to 46). The slightly larger drop at Ultra (45%) suggests that the combination of high resolution and maximum settings puts extreme pressure on the GPU. The consistent scaling pattern across all settings indicates that the RTX 3080 Ti is the primary bottleneck at 4K.

The 1080p data tells a different story. At Low settings, 247 FPS is extremely high, suggesting that the CPU is limiting the frame rate before the GPU reaches its maximum output. The 5600F's 6 cores and 12 threads, with a boost clock of 4.00 GHz, are sufficient to drive high frame rates in Fivem's multiplayer environments, but the data shows diminishing returns as settings increase. At 1080p Ultra, the 127 FPS result is still high, but the 120 FPS gap between Low and Ultra demonstrates how much the GPU workload increases with quality settings.

CPU Role

The Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, manufactured on TSMC's 7 nm process. It features 32 MB of shared L3 cache and 512 KB of L2 cache per core, with a base clock of 3.00 GHz and a boost clock of 4.00 GHz. The 65 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are standard for its class. The CPU's PassMark multithread score of 19236 and single-thread score of 2872 indicate solid performance across both heavily threaded and lightly threaded workloads.

In Fivem, the CPU's role is most apparent at lower resolutions and settings. At 1080p Low, the 247 FPS result suggests that the CPU is capable of driving very high frame rates, but the GPU becomes the limiting factor as settings increase. The 5600F's single-thread performance is particularly relevant for Fivem's multiplayer environments, where game logic and physics calculations often rely on fewer threads. The CPU's 85th percentile ranking among all CPUs, with an average benchmark score of 36945, places it above the vast majority of processors.

The CPU's nearest rivals show that it is performance-equivalent to a range of modern processors, including Intel's Core Ultra 5 225 and AMD's Ryzen 5 5500X3D, all within 0.5% of each other. This suggests that the 5600F is well-positioned for Fivem, providing sufficient processing power to avoid bottlenecking the RTX 3080 Ti at most settings and resolutions. The data indicates that the CPU is not the limiting factor at 1440p and 4K, where the GPU dominates performance, but it does cap maximum frame rates at 1080p Low.