Fivem

Fivem with the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 5070 presents a dataset where the CPU and GPU are closely matched, but the game's engine ultimately dictates performance scaling. The measured frames per second (FPS) across resolutions and settings reveal a component that is strong enough to push high refresh rates at 1080p, yet becomes the limiting factor at higher fidelity presets.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial, but the pattern is not uniform across all quality presets. At Low settings, the average frame rate falls from 227.3 FPS at 1920x1080 to 101.1 FPS at 3840x2160, a reduction of 55.5%. This steep decline indicates that even at the lowest settings, the GPU is being pushed harder as pixel count increases. The scaling from 1440p to 4K at Low settings is also significant, dropping from 182.8 FPS to 101.1 FPS, a 44.7% decrease.

At High settings, the drop from 1080p to 4K is from 178.8 FPS down to 66.6 FPS, a 62.8% reduction. This steeper percentage decline compared to Low settings suggests that the combination of higher resolution and more complex shading is taxing the GPU heavily. The Ultra preset shows the most dramatic scaling: 139.1 FPS at 1080p falls to 48.9 FPS at 4K, a 64.8% drop. This data points to the RTX 5070 being the primary bottleneck at 4K, especially with higher quality settings, as the frame rate nearly halves from one resolution tier to the next.

The data indicates that at 1080p, the CPU is more involved. The difference between Low and Ultra at 1080p is 227.3 FPS versus 139.1 FPS. While this is a large gap, the fact that the CPU's boost clock is 4.20 GHz and it has 6 cores with 12 threads suggests it can feed the GPU adequately at this resolution. However, the gap between Medium and Low at 1080p is only 21.9 FPS (205.3 vs 227.3), while the jump from Medium to High is 26.5 FPS (178.8 vs 205.3). This non-linear scaling suggests that the game's engine has specific bottlenecks that are not purely GPU-bound.

How This Combo Ranks

In the database of tested combinations, this pairing of the AMD Ryzen 5 3600 and the NVIDIA GeForce RTX 5070 achieves a combo rank of 415 out of 1792 tested combos. This places the setup in the top 23.2% of all tested configurations. The percentile ranking for the CPU is 76, while the GPU sits at the 83rd percentile. This indicates that the GPU is a slightly stronger component relative to the CPU in the broader benchmark spectrum.

The nearest rivals for the CPU show that the Ryzen 5 3600 is evenly matched with its immediate competitors. The Intel Core i5-11400 is only 0.1% faster, and the AMD Ryzen 5 7535HS is 0.2% slower. The AMD Ryzen 5 1600 is 0.2% faster, while the AMD EPYC 9274F is 0.3% faster. These negligible differences mean the CPU is not a differentiator in the overall ranking. For the GPU, the nearest rival is the AMD Radeon Pro 5300, which is 0.2% faster, while the NVIDIA Tesla M40 is 0.5% slower. The NVIDIA GeForce RTX 3090 is 0.6% slower, and the AMD Radeon Pro 580X is 0.7% slower. The ranking of 415 suggests that while the individual components are capable, the combination does not break into the top tier of performance configurations, likely due to the CPU's age relative to the GPU.

FAQ

Q: Does the AMD Ryzen 5 3600 bottleneck the NVIDIA GeForce RTX 5070 in Fivem?

A: The data shows that at 1080p Low, the combo achieves 227.3 FPS, which is high. However, the CPU's multi-threaded performance, as indicated by a Cinebench R23 multicore score of 15045, is not exceptionally high. The CPU is likely the limiting factor at 1080p with lower settings, as the GPU has more headroom.

Q: What is the best resolution for this combination?

A: Based on the measured FPS, 2560x1440 at High settings provides a balanced experience with 114.5 FPS. This is a significant step up from 1080p and remains highly playable. The 4K resolution at High settings (66.6 FPS) is playable but represents a substantial performance drop.

Q: How does the CPU's single-thread performance impact the game?

A: The Ryzen 5 3600 has a single-thread score of 2124 in Cinebench R23. This is a moderate score. The 1080p Low result of 227.3 FPS suggests that single-thread performance is adequate, but the game's engine may not be fully utilizing all 12 threads effectively.

Q: Is the RTX 5070 overkill for this CPU?

A: The GPU's average benchmark score is 41687, which is significantly higher than the CPU's 18129. The data shows that at 4K Ultra, the frame rate drops to 48.9 FPS, which is a GPU-bound scenario. At 1080p Low, the 227.3 FPS result is likely more CPU-bound, indicating the GPU is not being fully utilized.

Q: What is the performance difference between Low and Ultra settings at the same resolution?

A: At 1920x1080, the difference is 88.2 FPS (227.3 vs 139.1). At 2560x1440, the difference is 94.1 FPS (182.8 vs 88.7). At 3840x2160, the difference is 52.2 FPS (101.1 vs 48.9). The absolute gap shrinks at 4K because the GPU becomes the bottleneck.

Q: How does the combo rank compare to other tested systems?

A: The combo ranks 415th out of 1792, which places it in the top quarter of tested systems. This is a strong result, but it is not an outlier. The CPU's percentile of 76 and GPU's percentile of 83 suggest that the system is slightly GPU-heavy.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across the board. At 1920x1080, the Low preset delivers an average of 227.3 FPS, which is the highest score in the entire dataset. This is followed by Medium at 205.3 FPS, High at 178.8 FPS, and Ultra at 139.1 FPS. The scaling here shows a 38.8% drop from Low to Ultra, which is considerable but leaves the system in a very playable state at all settings.

Moving to 2560x1440, the performance drops but remains strong. The Low preset averages 182.8 FPS, while Medium delivers 148 FPS. High settings produce 114.5 FPS, and Ultra drops to 88.7 FPS. The gap between Low and Ultra here is 94.1 FPS, which is a larger absolute difference than at 1080p. This indicates that the GPU is starting to feel the load of the increased pixel count.

At 3840x2160, the performance takes a significant hit. The Low preset averages 101.1 FPS, which is still smooth. Medium delivers 82 FPS, and High drops to 66.6 FPS. The Ultra preset averages only 48.9 FPS, which is the lowest score in the dataset. The scaling from Low to Ultra at this resolution is a 52.2 FPS drop, which is a smaller absolute difference than at lower resolutions but represents a larger percentage drop of 51.6%. This pattern confirms that the GPU is the limiting factor at 4K.

CPU Role

The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture. It has a base clock of 3.60 GHz and a boost clock of 4.20 GHz. The CPU's benchmark scores show a strong multi-threaded capability, with a Cinebench R23 multicore score of 15045 and a 3DMark max threads score of 4603. However, its single-thread score of 2124 in Cinebench R23 is more modest.

In the context of Fivem, the game's performance is heavily reliant on the CPU's ability to process game logic and physics, which often favors single-thread performance. The data suggests that at 1080p Low, the system achieves 227.3 FPS, which is likely near the CPU's limit for this game. The fact that the FPS does not scale linearly with resolution at lower settings—dropping from 227.3 at 1080p to 182.8 at 1440p—indicates that the CPU is still a significant contributor at these settings.

The CPU's memory bandwidth of 51.2 GB/s and dual-channel DDR4 support are sufficient for this workload. The 32 MB of shared L3 cache is also a healthy amount for a game like Fivem. The CPU's performance is in line with its nearest rivals, as the delta percentages are all within 0.3% of the Intel Core i5-11400 and AMD Ryzen 5 7535HS, making it a balanced mid-range option.

Settings Recommendations

For the best balance of visual fidelity and performance, the 2560x1440 High preset is the recommended choice. It delivers an average of 114.5 FPS, which is well above the 60 FPS threshold and provides a smooth experience. This setting offers a significant visual upgrade over Low and Medium while maintaining a high frame rate.

For users with a 1080p display, the High preset at 178.8 FPS is an excellent choice. It provides a very high refresh rate experience without sacrificing too much visual quality. The Ultra preset at 139.1 FPS is also viable for those who prioritize visuals, as it still maintains a high frame rate.

At 4K, the Low preset is the only truly smooth option, with 101.1 FPS. The Medium preset at 82 FPS is playable but may show some dips in demanding scenes. The High preset at 66.6 FPS is borderline, and the Ultra preset at 48.9 FPS is not recommended for a consistently smooth experience. For 4K users, the Low or Medium presets are the most practical choices to maintain playable frame rates.