Fivem

The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 4070 SUPER delivers a strong Fivem experience across all tested resolutions, but the data shows a clear shift in system limitations as resolution increases. At 1080p, the combination is capable of very high frame rates, while at 4K, the GPU becomes the primary constraint, with even the High preset barely holding above 60 FPS. This analysis breaks down the measured results to help you understand where the bottleneck lies and which settings to use.

Resolution Scaling

The measured FPS data reveals a predictable but significant drop as resolution scales up from 1920x1080 to 3840x2160. At the High preset, the average frame rate falls from 179.5 FPS at 1080p to 120.8 FPS at 1440p, and then down to 66.9 FPS at 4K. This represents a 63% reduction in frame rate from 1080p to 4K. The scaling pattern indicates that at 1080p, the CPU has more headroom, while the RTX 4070 SUPER is not fully taxed. At 4K, the GPU workload increases dramatically, and the average frame rate drops to levels where the experience is still playable but not ideal for high-refresh-rate monitors.

Looking at the Low preset, the same trend appears but with higher absolute numbers. The 1080p Low result of 226.9 FPS drops to 192.9 FPS at 1440p and 103.2 FPS at 4K. The 4K Low result is notably higher than the 4K High result, suggesting that lowering settings can offset the resolution penalty significantly. The Ultra preset shows the steepest decline, moving from 143.1 FPS at 1080p to 94.7 FPS at 1440p and finally 48.7 FPS at 4K, which is the only measured configuration that falls below the 60 FPS threshold.

The data suggests that the limiting component changes with resolution. At 1080p, the gap between Low and Ultra is 83.8 FPS, which indicates some CPU dependency. At 4K, the gap between Low and Ultra widens to 54.5 FPS, but the overall frame rates are lower, pointing to the GPU as the primary bottleneck. The RTX 4070 SUPER, with its 12 GB of GDDR6X memory and 504.2 GB/s bandwidth, handles 4K well, but the data shows it cannot maintain high frame rates at Ultra settings. For a smoother 4K experience, you would need to accept the High preset or lower.

CPU Role

The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. Its benchmark scores show a balanced profile. In 3DMark, it scores 4605 in the 16-thread test and 696 in the single-thread test. Cinebench R23 results are 15045 for multi-core and 2124 for single-core. This processor sits at the 76th percentile among all CPUs, and its nearest rival, the Intel Core i5-11400, has an average score only 0.1% higher, indicating the 3600 is well-matched against that competitor.

In Fivem, the CPU's role is most evident at lower resolutions. At 1080p, the average frame rate at Low settings is 226.9 FPS, which is 47.4 FPS higher than at High settings. This difference suggests that at Low settings, the CPU can feed the GPU more frames, but the GPU is still not the limiting factor. The 12 threads of the 3600 are sufficient for the game's multi-threaded workload, and the 32 MB of shared L3 cache helps with data access. The PassMark multi-thread score of 17700 and the single-thread score of 2562 indicate solid performance for a CPU of this class.

At 1440p, the CPU still holds up well, with the Low preset achieving 192.9 FPS. However, the gap between Low and Ultra narrows to 98.2 FPS, suggesting the GPU starts to take on more of the load. At 4K, the CPU is no longer the main constraint, as the frame rates are limited by the GPU's rendering capacity. The Ryzen 5 3600's boost clock of 4.20 GHz is adequate for Fivem, and the benchmark results indicate it does not hold back the RTX 4070 SUPER in most scenarios. The data shows that this CPU is a capable partner for this GPU, particularly at 1080p and 1440p where it can help push frame rates above 120 FPS.

GPU Role

The NVIDIA GeForce RTX 4070 SUPER is the dominant component in this pairing, especially at higher resolutions. It features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. Its boost clock is 2475 MHz, and it has 7168 shading units. In PassMark, it scores 29995 in the G3D test and 17108 in the GPU compute test, placing it at the 84th percentile among all GPUs. Its nearest rival, the NVIDIA RTX A6000, has an average score only 0.2% higher, making this a high-performing card in its class.

The measured FPS data shows the GPU's strength and limitations. At 1080p, the RTX 4070 SUPER is not fully utilized, as the CPU is able to keep frame rates high. The 1080p Ultra result of 143.1 FPS is respectable, but the Low preset at 226.9 FPS shows the GPU is capable of much more when the CPU allows it. At 1440p, the GPU starts to work harder, with the High preset delivering 120.8 FPS and the Ultra preset at 94.7 FPS. This is a solid performance for a demanding multiplayer game.

At 4K, the GPU becomes the clear bottleneck. The High preset averages 66.9 FPS, which is playable but not ideal for competitive play. The Ultra preset drops to 48.7 FPS, which is below the 60 FPS target. The Low preset at 4K achieves 103.2 FPS, showing that the GPU can handle 4K when settings are reduced. The 12 GB of VRAM is sufficient for Fivem at 4K, as the game does not appear to exceed this capacity based on the measured performance. The RTX 4070 SUPER's Ada Lovelace architecture and 5 nm process node provide efficient performance, but the data indicates that for 4K Ultra, you would need a more powerful GPU or be willing to accept lower settings.

Settings Recommendations

The measured FPS data provides clear guidance on which preset offers the best experience for different priorities. At 1080p, the High preset delivers 179.5 FPS, which is excellent for high-refresh-rate monitors. The Medium preset at 206.5 FPS and Low preset at 226.9 FPS offer even higher frame rates, but the visual quality trade-off may not be worth it for most players. The Ultra preset at 143.1 FPS is still above 144 Hz, but it is the lowest of the four presets at this resolution. For 1080p, the High preset is the best balance of visual fidelity and performance.

At 1440p, the High preset achieves 120.8 FPS, which is ideal for 120 Hz monitors. The Medium preset at 150.9 FPS is also a strong option if you prefer higher frame rates over visual quality. The Ultra preset at 94.7 FPS is still playable, but it is below the 100 FPS mark. The Low preset at 192.9 FPS is overkill for most displays, but it shows the system's headroom. For 1440p, the High preset is recommended as it provides a smooth experience without sacrificing too much visual quality.

At 4K, the choice is more constrained. The High preset at 66.9 FPS is the best option for a balance of quality and performance, as it stays above 60 FPS. The Medium preset at 83 FPS offers a higher frame rate, but the visual difference between Medium and High may be noticeable. The Ultra preset at 48.7 FPS is not recommended for a smooth experience, as it falls below 60 FPS. The Low preset at 103.2 FPS is the only way to achieve a high frame rate at 4K, but it sacrifices significant visual quality. For 4K, the High preset is the recommended setting, as it provides the best balance of visual fidelity and playability.

FAQ

Q: Can this system run Fivem at 4K 60 FPS?

A: Yes, but only at the High preset, which averages 66.9 FPS. The Medium preset averages 83 FPS, while the Ultra preset drops to 48.7 FPS, which is below 60 FPS.

Q: What is the best preset for a 144 Hz monitor at 1440p?

A: The High preset averages 120.8 FPS, which is close to 144 Hz but not quite there. The Medium preset at 150.9 FPS is the best option for achieving frame rates above 144 FPS at 1440p.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: At 1080p, the CPU is more of a limiting factor, as the gap between Low and Ultra is 83.8 FPS. The GPU is capable of higher frame rates, but the CPU cannot feed it fast enough.

Q: How does the Ryzen 5 3600 compare to its rivals?

A: The Ryzen 5 3600 is within 0.3% of the AMD Ryzen 5 7535HS and within 0.1% of the Intel Core i5-11400, indicating nearly identical average benchmark scores.

Q: Does the RTX 4070 SUPER have enough VRAM for Fivem at 4K?

A: The 12 GB of GDDR6X memory appears sufficient, as the measured frame rates at 4K High (66.9 FPS) and 4K Low (103.2 FPS) do not indicate memory limitations.

Q: What is the difference between Low and Ultra presets at 4K?

A: The Low preset averages 103.2 FPS, while the Ultra preset averages 48.7 FPS, a difference of 54.5 FPS. This shows a significant performance cost for the highest visual settings.

Measured FPS Breakdown

At 1920x1080, the average frame rates are as follows: Low settings achieve 226.9 FPS, Medium settings achieve 206.5 FPS, High settings achieve 179.5 FPS, and Ultra settings achieve 143.1 FPS. The spread from Low to Ultra is 83.8 FPS, indicating that the CPU is a factor at this resolution.

At 2560x1440, the average frame rates are: Low settings achieve 192.9 FPS, Medium settings achieve 150.9 FPS, High settings achieve 120.8 FPS, and Ultra settings achieve 94.7 FPS. The gap from Low to Ultra is 98.2 FPS, showing a wider performance range as the GPU starts to take on more load.

At 3840x2160, the average frame rates are: Low settings achieve 103.2 FPS, Medium settings achieve 83 FPS, High settings achieve 66.9 FPS, and Ultra settings achieve 48.7 FPS. The difference from Low to Ultra is 54.5 FPS, and the Ultra preset is the only one that falls below 60 FPS. This data shows the RTX 4070 SUPER is capable of 4K gaming, but the High preset is the highest setting that maintains a playable frame rate.