Downfall

FAQ

Q: What is the average frame rate for this combination at 1080p Ultra settings in Downfall?

A: At 1920x1080 with Ultra settings, the AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 5050 delivers an average of 84 FPS. This is a playable result for a horror title, though it is the lowest average at that resolution across the tested settings presets.

Q: How does the CPU compare to its nearest rivals in overall benchmark scores?

A: The Ryzen 7 9700F has an average benchmark score of 69996, placing it in the 94th percentile of all CPUs. It is effectively tied with the AMD Ryzen 9 7940HX, which scores 69875 (a 0.2% difference), and sits slightly ahead of the Intel Core i7-14700KF, which scores 70163 (a -0.2% delta from the 9700F’s perspective).

Q: What is the GPU’s standing relative to all tested graphics cards?

A: The RTX 5050 falls in the 66th percentile of all GPUs, with an average benchmark score of 21035. Its nearest rival, the AMD Radeon RX Vega M GL, scores 21153, which is 0.6% higher, indicating the 5050 is competitive but not dominant in its class.

Q: Which resolution and settings combination yields the highest average frame rate?

A: The highest measured average is 201 FPS, achieved at 1920x1080 with Low settings. The next best is 165 FPS at 1080p Medium, followed by 144 FPS at 2560x1440 Low, showing a clear scaling pattern as resolution increases.

Q: Is there a measurable frame rate difference between Medium and High settings at 1440p?

A: Yes. At 2560x1440, Medium settings produce an average of 118 FPS with a minimum of 100 and maximum of 135, while High settings drop to an average of 96 FPS. The gap of 22 FPS between these presets is significant for maintaining smooth gameplay.

Q: How does the combo rank among all tested combinations for this game?

A: This specific CPU-GPU pairing ranks 2281 out of 3716 tested combos for Downfall. That places it in the lower-middle portion of the field, meaning it is outclassed by many alternatives but still functional for the game’s requirements.

CPU Role

The AMD Ryzen 7 9700F is an 8-core, 16-thread processor built on the Zen 5 architecture (Granite Ridge) using a 4 nm process from TSMC. It has a base clock of 3.80 GHz and a boost clock of 5.50 GHz, with a 65 W TDP. The CPU supports DDR5 memory over a dual-channel bus, providing 89.6 GB/s of bandwidth, and connects via PCIe Gen 5 with 24 lanes.

For a game like Downfall, which is a horror title rather than a CPU-intensive simulation, the 9700F’s single-thread performance is the primary driver of frame pacing. The PassMark single-thread score is 4691, which is strong and ensures that AI logic, physics calculations, and game scripting do not bottleneck the GPU. The multi-thread score of 36470 indicates ample headroom for background tasks, but the game itself is unlikely to utilize all 16 threads effectively.

The CPU’s 32 MB of shared L3 cache helps with repetitive data access patterns common in game engines. In the measured results, the CPU’s influence becomes more apparent at lower resolutions where the GPU is less stressed. At 1080p Low, the combo hits 201 FPS, which suggests the CPU can feed frames well above typical display refresh rates. However, at 4K Ultra, the average drops to 37 FPS, indicating that the GPU becomes the limiting factor.

Compared to its nearest rivals, the 9700F is virtually indistinguishable in raw compute: it is 0.2% ahead of the Ryzen 9 7940HX, 0.7% ahead of the Ryzen 9 7950X, and 0.9% ahead of the Core i7-14700K. This means that swapping between these CPUs would produce negligible differences in Downfall’s frame rates, assuming the same GPU is used.

GPU Role

The NVIDIA GeForce RTX 5050 is a Blackwell 2.0 architecture GPU built on a 5 nm process, featuring 2560 shading units, 80 texture mapping units, and 32 ROPs. It has 8 GB of GDDR6 memory on a 128-bit bus, delivering 320.0 GB/s of bandwidth. The base clock is 2317 MHz with a boost of 2572 MHz, and memory runs at 2500 MHz (20 Gbps effective).

In Downfall, the GPU’s memory capacity and bandwidth are critical, especially at higher resolutions. The 8 GB VRAM is sufficient for 1080p and 1440p at most settings, but at 4K Ultra, the game’s texture demands likely exceed what the 5050 can handle efficiently, contributing to the 37 FPS average. The 320 GB/s bandwidth is modest by modern standards, which explains why performance scales steeply as resolution increases.

The GPU’s 13.17 TFLOPS of FP32 compute is adequate for a horror game with moderate visual complexity. The measured data shows that the 5050 is the bottleneck in most scenarios, as evidenced by the sharp drop from 96 FPS at 1440p High to 60 FPS at 4K High. The GPU’s 66th percentile ranking among all GPUs reinforces that it is a mid-range part, not designed for extreme resolutions.

The nearest rival comparison shows the RTX 5050 is within 1.6% of the AMD Radeon RX 5600 XT, which means users upgrading from that older card would see minimal gains. The RTX 5050’s ray tracing and tensor cores (20 and 80, respectively) are present, but Downfall, released in 2016, does not leverage these features, so raw rasterization performance is what matters.

Measured FPS Breakdown

The measured data provides a clear picture of how this combo scales across resolutions and settings. At 1920x1080, the average frame rates are 201 FPS on Low, 165 FPS on Medium, 135 FPS on High, and 84 FPS on Ultra. The Medium preset shows a minimum of 140 FPS and a maximum of 189, indicating solid frame pacing without severe dips.

Moving to 2560x1440, the averages are 144 FPS on Low, 118 FPS on Medium, 96 FPS on High, and 60 FPS on Ultra. The Medium preset records a minimum of 100 FPS and a maximum of 135, which is still smooth for most displays. The drop from High to Ultra at this resolution is substantial, losing 36 FPS on average.

At 3840x2160, the results become more constrained: 89 FPS on Low, 73 FPS on Medium, 60 FPS on High, and 37 FPS on Ultra. The Medium preset has a minimum of 62 FPS and a maximum of 84, showing that even the middle setting struggles to maintain a consistent 60 FPS floor. The Ultra preset at 4K is effectively unplayable, as 37 FPS average would result in noticeable stutter in a horror game where smooth motion is essential for atmosphere.

The scaling pattern is consistent: each step up in resolution costs roughly 30-40% of the frame rate, while each step up in settings costs a similar amount. The only anomaly is the 4K Low result of 89 FPS, which is surprisingly high and suggests that the game’s low preset reduces texture and shading load enough to keep the GPU from being fully saturated.

How This Combo Ranks

This combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5050 ranks 2281 out of 3716 tested combos for Downfall, placing it in the 61st percentile of all combinations. This is a below-average ranking, indicating that most other pairings tested by the database outperform it.

The rank is driven primarily by the GPU’s mid-tier standing (66th percentile) rather than the CPU, which is top-tier (94th percentile). The CPU’s strong single-thread and multi-thread scores do not translate into a high combo rank because the game is GPU-bound in most scenarios. The data suggests that pairing the 9700F with a stronger GPU would yield a significantly better rank, while keeping the RTX 5050 with a weaker CPU would only slightly reduce the rank.

In practical terms, this combo is best suited for 1080p gaming with High or Ultra settings, where it achieves 135 and 84 FPS respectively. At 1440p, Medium settings are the sweet spot at 118 FPS, but Ultra drops to exactly 60 FPS, which is borderline for a horror game that benefits from high frame rates. The 4K results are mostly disappointing, with only the Low preset exceeding 60 FPS.

Settings Recommendations

Based on the measured data, the optimal experience for this combo is at 1920x1080 with Medium settings, delivering an average of 165 FPS with a minimum of 140 FPS. This provides a high frame rate buffer that ensures smooth gameplay even during intense horror sequences, while the Medium preset still offers adequate visual quality.

For users prioritizing visual fidelity over raw speed, 1920x1080 with High settings is a strong alternative, achieving 135 FPS average. The drop from Medium to High is 30 FPS, but the visual improvement in texture detail and lighting may be worth it for players who are not sensitive to frame rate.

At 2560x1440, the recommended setting is Medium, which yields 118 FPS with a minimum of 100 FPS. This is the highest resolution at which the combo can maintain a stable 100+ FPS floor. High settings at 1440p drop to 96 FPS, which is still playable but leaves less headroom for demanding scenes.

For 4K users, the only viable option is Low settings at 89 FPS, as Medium drops to 73 FPS and High falls to 60 FPS, which is the absolute minimum acceptable for a horror game. Ultra is not recommended at any resolution above 1080p, as the 84 FPS at 1080p Ultra is the only Ultra result that exceeds 60 FPS, and it does so by a slim margin.

The data indicates that the best overall balance of performance and quality is 1080p Medium, followed closely by 1440p Medium. Users with high refresh rate monitors should stick to 1080p Low or Medium to take full advantage of the 201 FPS and 165 FPS ceilings, respectively.