Doom

The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5050 combination delivers a highly playable experience in Doom across all tested resolutions, with the data showing a clear scaling pattern from 4K to 1080p. At 1080p, the combo exceeds 120 FPS on every preset, while 1440p remains fluid at 79-131 FPS. The 4K results are more demanding, with averages ranging from 43 FPS at Ultra to 71 FPS at Low, indicating that this pairing is best suited for high-refresh-rate 1080p or 1440p gaming in this title.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The measured average is 149 FPS at 1920x1080 with High settings. This is 27 FPS higher than the Ultra preset at the same resolution, showing that the High preset offers a substantial performance headroom over the maximum quality setting.

Q: How does the combo perform at 4K compared to lower resolutions?

A: At 3840x2160, the average FPS ranges from 43 FPS at Ultra to 71 FPS at Low. This represents a significant drop from 1440p, where the same settings yield 79 FPS and 131 FPS respectively, indicating that 4K is the most demanding scenario for this hardware pairing.

*Q: Is the RTX 5050’s 8 GB VRAM sufficient for Doom at high settings?*

A: The data shows playable results at all tested settings and resolutions, including 4K Ultra with an average of 43 FPS. The 8 GB GDDR6 memory, paired with a 320.0 GB/s bandwidth, appears adequate for this title’s requirements across the tested configurations.

Q: What is the best performance uplift from lowering settings at 1440p?

A: At 2560x1440, moving from Ultra (79 FPS) to Low (131 FPS) provides a 52 FPS increase, which is a 65.8% improvement in average frame rate. The Medium preset at 114 FPS offers a balanced middle ground.

Q: How does the CPU’s multithreaded score compare to its nearest rivals?

A: The Ryzen 7 9700F has an average benchmark score of 69,996, which is 0.2% higher than the AMD Ryzen 9 7940HX and 0.9% higher than the Intel Core i7-14700K. It is 0.2% lower than the Intel Core i7-14700KF.

Q: What is the maximum FPS recorded at any resolution in the measured data?

A: The highest average FPS is 202 at 1920x1080 with Low settings, with a maximum recorded frame rate of 203 FPS at the same resolution on Medium settings. This indicates the combo can push frame rates well beyond 200 FPS at the lowest quality preset.

CPU Role

The AMD Ryzen 7 9700F is an 8-core, 16-thread processor based on the Zen 5 architecture, built on TSMC’s 4 nm process. It operates with a base clock of 3.80 GHz and a boost clock of 5.50 GHz, which directly influences its ability to handle Doom’s game logic, physics, and AI calculations. The processor’s 32 MB of shared L3 cache provides fast access to frequently used data, while its dual-channel DDR5 memory support with 89.6 GB/s bandwidth ensures the GPU is fed with data without bottlenecks.

In the context of Doom, which is a fast-paced FPS, the CPU’s single-thread performance is critical for maintaining consistent frame pacing. The PassMark single-thread score of 4,691 places this chip in the 94th percentile of all CPUs, indicating strong per-core capability. The multithreaded score of 36,470 further supports that the 8-core, 16-thread configuration is well-suited for handling the game’s background tasks while prioritizing the primary rendering thread.

The data shows that the CPU’s performance is not a limiting factor in the measured FPS, as the frame rates scale predictably with resolution and settings. At 1080p Low, the average of 202 FPS suggests that the CPU can deliver high input rates without becoming a bottleneck. The nearest rivals, including the AMD Ryzen 9 7940HX and Intel Core i7-14700KF, post average scores within 0.2% of the 9700F, confirming that this processor is competitive in its class for gaming workloads.

The 65W TDP and unlocked multiplier indicate that the CPU is power-efficient and can be overclocked for additional performance, though the measured results reflect stock behavior. With a launch MSRP of $289, this is a mainstream desktop part that pairs well with the RTX 5050 for Doom.

GPU Role

The NVIDIA GeForce RTX 5050 is the graphics engine in this combination, built on the Blackwell 2.0 architecture with a 5 nm process. It features 2,560 shading units, 80 texture mapping units, and 32 ROPs, which handle the rasterization workload of Doom. The GPU’s base and boost clocks are 2,317 MHz and 2,572 MHz respectively, with a memory clock of 2,500 MHz effective at 20 Gbps, providing a memory bandwidth of 320.0 GB/s across a 128-bit bus.

The 8 GB of GDDR6 memory is a key specification for 4K gaming, where the data shows an average of 43 FPS at Ultra settings. This indicates that the memory capacity is sufficient for the game’s textures at high resolutions, though the 130W TDP and PCIe 5.0 x8 interface ensure the card is not power-constrained in this scenario. The GPU’s FP32 performance of 13.17 TFLOPS and texture rate of 205.8 GTexel/s are the raw computational metrics that drive the rendering pipeline.

Compared to its nearest rivals, the RTX 5050’s average benchmark score of 21,035 is 1.6% higher than the AMD Radeon RX 5600 XT, while being 0.6% lower than the AMD Radeon RX Vega M GL. The GPU’s percentile rank of 66 places it in the upper third of all GPUs, which aligns with the measured FPS results in Doom. The 3DMark Steel Nomad DX12 score of 2,502 further validates its DirectX 12 performance, which is the primary API for this title.

The GPU’s pixel rate of 82.30 GPixel/s and ROP count of 32 are directly relevant to fill-rate-dependent scenarios like 4K. The measured 4K performance shows a 28 FPS difference between Low (71 FPS) and Ultra (43 FPS), highlighting that the GPU’s compute and memory subsystems are more stressed at higher quality settings.

How This Combo Ranks

The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5050 combination ranks 1766 out of 2930 tested combos in Doom, placing it in the 60th percentile of all possible pairings. This mid-tier ranking indicates that while the combo delivers solid performance, there are numerous other configurations that achieve higher frame rates in this game. The rank reflects the balance between the CPU’s high single-thread score and the GPU’s mid-range positioning relative to the entire benchmark database.

The CPU’s 94th percentile ranking among all processors suggests that the Ryzen 7 9700F is a strong component, but the GPU’s 66th percentile rank pulls the overall combo down. This is expected, as Doom is a GPU-intensive title at higher resolutions, and the RTX 5050 is not a top-tier graphics card. The data shows that the combo’s performance is more competitive at 1080p, where the GPU is less of a bottleneck, allowing the CPU’s strengths to shine.

In the context of the nearest rivals, the CPU is effectively tied with the Intel Core i7-14700KF, which has a 0.2% higher average score. This indicates that the 9700F is not the limiting factor in the combo’s ranking. For the GPU, the RTX 5050 is slightly ahead of the RX 5600 XT, but behind the RX Vega M GL, suggesting that the graphics card is the primary determinant of the overall rank.

The rank of 1766 out of 2930 combos means that approximately 60% of tested systems outperform this pairing in Doom. This is not a negative indication, as the measured FPS are all playable, but it does position the combo as a mainstream solution rather than a high-end one. The 1440p results, with averages between 79 and 131 FPS, are particularly strong for this rank, suggesting that the combo punches above its weight at lower resolutions.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the combo achieves its highest frame rates, with an average of 202 FPS at Low settings and 149 FPS at High settings. The Medium preset yields 176 FPS with a minimum of 150 FPS and a maximum of 203 FPS, while Ultra drops to 122 FPS. These results show that 1080p is well within the GPU’s comfort zone, with all presets exceeding 120 FPS for smooth high-refresh-rate gaming.

At 2560x1440, the performance scales down proportionally. The Low preset averages 131 FPS, which is 35.1% lower than the 1080p Low result. High settings produce 96 FPS, Medium averages 114 FPS with a minimum of 97 FPS and a maximum of 131 FPS, and Ultra settles at 79 FPS. The 1440p results indicate that the combo is capable of driving a 144Hz monitor at Medium settings or lower, while High settings remain playable for 60Hz displays.

The 4K results at 3840x2160 show the most significant drop in performance. The Low preset averages 71 FPS, which is a 64.9% decrease from the 1080p Low result. Medium settings average 62 FPS with a minimum of 52 FPS and a maximum of 71 FPS, High settings drop to 52 FPS, and Ultra falls to 43 FPS. These numbers suggest that 4K gaming is only viable at Low or Medium settings for a consistently smooth experience, as the Ultra preset dips below the 60 FPS threshold.

The data shows a consistent pattern: for every resolution, the difference between Low and Ultra settings is approximately 40-45 FPS. At 1080p, the spread is 80 FPS (202 to 122), at 1440p it is 52 FPS (131 to 79), and at 4K it is 28 FPS (71 to 43). This indicates that the GPU’s headroom diminishes as resolution increases, with the 4K Ultra preset being the most demanding scenario in the dataset.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and refresh rate. For 1080p displays, the High preset at 149 FPS offers an excellent balance between visual quality and performance, easily supporting 144Hz monitors. The Ultra preset at 122 FPS is still highly playable and provides the best image quality, making it a viable choice for users who prioritize visuals over a small FPS margin.

At 1440p, the Medium preset at 114 FPS is the recommended choice for high-refresh-rate gaming, as it maintains a minimum of 97 FPS and a maximum of 131 FPS. The High preset at 96 FPS is suitable for 60Hz displays or for users who prefer more visual fidelity, while the Ultra preset at 79 FPS may cause noticeable frame dips on 144Hz panels. For the best experience, Medium settings provide the smoothest gameplay without sacrificing too much quality.

For 4K gaming, the data suggests that the Low preset at 71 FPS is the only setting that consistently exceeds 60 FPS. The Medium preset at 62 FPS is borderline, with a minimum of 52 FPS, which may result in occasional stutters. The High and Ultra presets at 52 FPS and 43 FPS respectively are not recommended for fast-paced gameplay, as they fall below the 60 FPS threshold. Users with 4K displays should prioritize the Low or Medium presets to maintain a fluid experience.

The measured minimum and maximum FPS values for the Medium presets provide insight into frame time consistency. At 1080p Medium, the range is 150-203 FPS, which is a 53 FPS spread, indicating stable performance. At 1440p Medium, the range is 97-131 FPS, and at 4K Medium, it is 52-71 FPS. These ranges suggest that the combo maintains consistent frame pacing across all resolutions, with no significant stuttering or frame drops, making the Medium preset a safe recommendation for most users.