Downfall

# How This Combo Ranks

The AMD Ryzen 7 5700 + AMD Radeon RX 6750 XT combination ranks 1695 out of 3716 tested combos in Downfall, placing it in the upper-middle tier of all tested systems. This percentile position reflects a pairing where the GPU carries most of the performance weight, while the CPU's eight-core Zen 3 architecture provides sufficient headroom for the game's horror-themed rendering demands. The combo's rank suggests it sits comfortably ahead of the median tested system, though it is not positioned among the elite configurations that dominate the top quartile.

Benchmark results indicate that this pairing is well-balanced for Downfall's engine, which appears to scale predictably with GPU capability across the tested resolution and settings matrix. The CPU's 16 MB of L3 cache and 16 threads contribute to consistent frame pacing, while the GPU's 12 GB of VRAM ensures that texture-heavy horror environments do not cause stutter-related dips. The data shows a system that can handle the game's atmospheric lighting and shadow effects without the CPU becoming a bottleneck at any tested resolution, a conclusion supported by the FPS progression from 1080p through 4K.

# GPU Role

The AMD Radeon RX 6750 XT serves as the primary performance driver in this combo, with its 12 GB of GDDR6 memory on a 192-bit bus delivering 432.0 GB/s of bandwidth. This memory configuration proves critical for Downfall, a 2016 horror title whose detailed environments and dynamic lighting benefit from ample VRAM allocation. The GPU's 2560 shading units, 160 texture mapping units, and 64 ROPs provide the raw throughput needed to maintain high frame rates, while its 40 ray accelerators offer hardware support for advanced lighting effects where the game implements them.

Clock speeds position this GPU for consistent performance: a 2150 MHz base clock, 2495 MHz game clock, and 2600 MHz boost clock. The game clock, in particular, represents the sustained frequency during typical gaming workloads, and Downfall's measured results reflect this stability. The 13.31 TFLOPS of FP32 compute power translates to strong rasterization performance, which dominates in a horror title that predates widespread ray tracing adoption. The GPU's 71st percentile ranking among all GPUs reinforces its role as a mid-to-upper-range solution that can handle demanding titles at high settings.

The GPU's 250 W TDP and dual-slot design indicate a power-hungry component that requires adequate cooling, though the measured FPS data suggests this thermal budget is well-spent in Downfall. The 600 W suggested PSU provides sufficient headroom for the entire system, and the PCIe 4.0 x16 interface ensures no bandwidth limitations. With a boost clock 450 MHz above the base, the GPU demonstrates significant dynamic range, allowing it to scale performance based on thermal and power availability during extended gaming sessions.

# FAQ

Q: What is the best resolution for this combo in Downfall?

A: The data shows 1440p High provides an excellent balance, delivering 115 avg FPS while maintaining visual quality. At 4K High, the combo still achieves 72 avg FPS, which is playable, but the 1440p result offers significantly more headroom for demanding scenes.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 5700 has an average benchmark score of 25517, placing it within 0.1% of the Intel Xeon D-2752TER (25530) and 0.1% ahead of the AMD Ryzen 5 7640U (25485). It trails the AMD Ryzen 5 6600H (25550) by 0.1% and leads the AMD Ryzen 7 5825U (25446) by 0.3%.

Q: Does the GPU bottleneck the CPU at any resolution?

A: At 1080p Low, the combo hits 240 avg FPS, suggesting the CPU may be approaching its limit. However, at higher resolutions like 1440p and 4K, the GPU becomes the primary constraint, as evidenced by the FPS scaling patterns across settings.

Q: What is the GPU's performance position relative to its rivals?

A: The RX 6750 XT scores 26011 on average, which is 0.5% ahead of the AMD Radeon R9 M395X (25891), 0.6% ahead of the AMD FirePro W7100 (25856), and 0.7% ahead of the AMD FirePro D700 (25842). It leads the NVIDIA GeForce RTX 3080 Ti Mobile (25740) by 1.1%.

Q: Is the 12 GB VRAM sufficient for Downfall at 4K?

A: The measured data shows 4K Ultra runs at 45 avg FPS, indicating the GPU's compute capability, not VRAM capacity, is the limiting factor. The 12 GB allocation is never exceeded in any tested configuration, as even the most demanding settings remain within memory limits.

Q: How does the CPU's single-thread performance affect the game?

A: The Ryzen 7 5700 scores 901 in 3DMark single-thread and 293 in Cinebench R15 single-core tests. These scores indicate adequate single-thread performance for Downfall's engine, which relies on a mix of multi-threaded rendering tasks and single-threaded game logic.

# Measured FPS Breakdown

At 1080p, the combo demonstrates its highest performance ceiling. Low settings produce 240 avg FPS, representing the maximum frame rate achievable with this hardware. Medium settings deliver 197 avg FPS with a minimum of 167 and maximum of 226, showing consistent frame delivery. High settings drop to 161 avg FPS, while Ultra settings reduce performance to 101 avg FPS. This progression from 240 to 101 FPS across the settings spectrum indicates a GPU that remains capable even at the highest quality preset, with no configuration falling below the 100 FPS threshold.

Moving to 1440p, the performance scaling follows a predictable pattern. Low settings yield 172 avg FPS, a 28% reduction from the 1080p Low result. Medium settings produce 140 avg FPS with a minimum of 119 and maximum of 162, maintaining smooth gameplay throughout. High settings achieve 115 avg FPS, while Ultra settings drop to 72 avg FPS. The 1440p results show a narrower performance band between settings, with the gap from Low to Ultra representing a 58% performance reduction, compared to the 58% reduction seen at 1080p.

At 4K, the GPU's workload increases substantially. Low settings produce 107 avg FPS, maintaining playable performance even at this demanding resolution. Medium settings deliver 87 avg FPS with a minimum of 74 and maximum of 100, showing that the frame rate remains stable during intense scenes. High settings reduce performance to 72 avg FPS, which is still smooth for a horror title. Ultra settings, however, drop significantly to 45 avg FPS, indicating that this preset pushes the GPU to its limits at 4K resolution.

# Resolution Scaling

The FPS drop from 1080p to 4K reveals important information about the limiting component in this combo. At Low settings, performance decreases from 240 FPS at 1080p to 107 FPS at 4K, a 55% reduction. This scaling suggests that the GPU becomes increasingly constrained as pixel count rises, since the CPU workload remains relatively constant across resolutions. The 1080p Low result of 240 FPS likely approaches the CPU's maximum output capability, while the 4K Low result of 107 FPS indicates the GPU is now the primary bottleneck.

Medium settings show a similar pattern, with 197 FPS at 1080p dropping to 87 FPS at 4K, a 56% reduction. High settings demonstrate a 55% reduction from 161 FPS to 72 FPS. Ultra settings experience the most severe scaling, falling from 101 FPS at 1080p to 45 FPS at 4K, a 55% reduction. The consistency of this ~55% reduction across all settings strongly indicates that the GPU is the limiting factor at higher resolutions, while the CPU maintains sufficient headroom throughout.

The intermediate resolution of 1440p shows the transition point. Performance at 1440p falls roughly midway between the 1080p and 4K results for each setting, confirming that the GPU's scaling is resolution-bound rather than settings-bound. This behavior is typical of a system where the GPU's pixel throughput becomes the primary constraint as resolution increases, while the CPU's 8 cores and 16 threads provide consistent frame generation regardless of resolution.

# Settings Recommendations

For players targeting the highest frame rates, Low settings at 1080p deliver 240 avg FPS, which exceeds the refresh rate of most monitors and provides maximum responsiveness. This configuration is ideal for competitive play or for users with high-refresh-rate displays seeking to maximize performance. However, given Downfall's horror genre, visual atmosphere plays a significant role in the experience, so this setting may sacrifice too much graphical fidelity.

The Medium preset at 1440p offers the best overall experience based on the measured data. The 140 avg FPS with a minimum of 119 and maximum of 162 ensures smooth gameplay even during intense horror sequences, while the 1440p resolution provides substantially more detail than 1080p. This configuration represents a strong balance between visual quality and performance, making it suitable for most gaming scenarios.

At 4K, the High preset delivers 72 avg FPS, which is playable for a horror title where precise timing is less critical than in fast-paced action games. The Medium preset at 4K provides 87 avg FPS with a minimum of 74, offering a safer margin for maintaining smooth frame delivery. Players with 4K displays who prioritize visual fidelity should consider High settings, while those who value consistent frame rates should opt for Medium. The Ultra preset at any resolution above 1080p should be avoided, as the 4K Ultra result of 45 avg FPS falls below the threshold for smooth gameplay in a genre that relies on atmospheric tension and timing.