Downfall

# Downfall with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5060

The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 5060 delivers a compelling 1080p and 1440p experience in Downfall, but the data reveals a sharp performance cliff at 4K that shifts the bottleneck discussion entirely. This combination ranks 817th out of 1,741 tested combos in this horror title, placing it in the upper-middle tier of the database. The measured frame rates across twelve resolution/settings combinations tell a story of a GPU that excels at lower pixel counts but struggles to maintain playable performance when pushed to Ultra at 4K, while the CPU's 8-core/16-thread configuration proves more than adequate for the game's demands.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and highly settings-dependent. At Low settings, the average frame rate falls from 241.7 FPS at 1920x1080 to 104.2 FPS at 3840x2160 — a 56.9% reduction. At Medium, the drop goes from 194 FPS to 90.1 FPS, a 53.6% decline. High settings show a similar pattern: 158.5 FPS at 1080p down to 73.8 FPS at 4K, representing a 53.4% loss. The Ultra preset is where the scaling turns catastrophic — 101.8 FPS at 1080p collapses to 43.4 FPS at 4K, a 57.4% reduction that pushes the experience below the 60 FPS threshold.

This scaling pattern suggests the RTX 5060's 8 GB of GDDR7 memory and 128-bit bus become increasingly strained as pixel count rises. The 4K Ultra result of 43.4 FPS is particularly telling — it is less than half of the 1080p Ultra score, indicating that memory bandwidth and capacity constraints amplify the resolution penalty more than pure compute limitations would suggest. The fact that 1440p results sit much closer to 1080p performance — 174 FPS at Low versus 241.7 FPS at 1080p, a 28% drop — indicates the GPU remains reasonably efficient up to 2560x1440, but the jump to 4K crosses a threshold where the architecture's 128-bit memory interface becomes a limiting factor.

The data implies that at 1080p and 1440p, the RTX 5060 is the primary driver of performance, with the Ryzen 7 5700 keeping pace. However, at 4K, the GPU's memory subsystem becomes the dominant constraint, as evidenced by the disproportionate collapse at Ultra settings. The 4K Ultra result of 43.4 FPS is actually lower than the 1440p Ultra result of 73.5 FPS by 40.9%, a steeper drop than the 33% pixel increase would predict, confirming that something beyond raw pixel throughput — likely memory bandwidth saturation — is at play.

FAQ

Q: What is the best resolution for this combo in Downfall?

A: The data shows 2560x1440 as the sweet spot, where High settings deliver 118.2 FPS and even Ultra maintains 73.5 FPS. At 1920x1080, the combo achieves 158.5 FPS on High, but the 1440p results offer a better balance of visual quality and frame rate headroom.

Q: How does the RTX 5060 compare to its nearest GPU rivals?

A: The RTX 5060's average benchmark score of 30,109 places it within 0.6% of the NVIDIA GeForce RTX 5070 Mobile (29,928) and 0.5% ahead of the NVIDIA Tesla M60 (29,969). It is essentially tied with the AMD Radeon RX 7700 XT (30,097, 0% delta), which suggests comparable raw compute capability.

Q: Is the Ryzen 7 5700 a bottleneck for this game?

A: Benchmark data indicates no. The CPU's 8 cores and 16 threads, combined with a 3.70 GHz base and 4.60 GHz boost clock, deliver a Cinebench R23 multi-core score of 20,655 and single-core score of 2,916. These scores place it in the 84th percentile of all CPUs, and the measured FPS at 1080p Low (241.7 FPS) suggests the GPU is the limiting factor, not the processor.

Q: What is the 4K Ultra experience like?

A: Poor. The measured 43.4 FPS average at 3840x2160 Ultra falls well below the 60 FPS threshold for smooth gameplay. Even at 4K High, the 73.8 FPS result barely clears this bar, indicating that 4K gaming is only viable at lower presets for this combination.

Q: How does the CPU rank against its nearest competitors?

A: The Ryzen 7 5700's average benchmark score of 27,220 is 0.7% ahead of the Intel Core i9-9900K (27,043), 0.8% ahead of the Intel Core i7-12700H (27,006), and 1.2% ahead of the AMD Ryzen AI 5 340 (26,909). This places it in a tightly contested performance band.

Q: Does the game favor CPU or GPU performance?

A: The data strongly suggests GPU-bound behavior. At 1080p Low, the combo produces 241.7 FPS, but at 4K Ultra it drops to 43.4 FPS — a 5.6x difference. If the CPU were the bottleneck, the FPS would remain relatively flat across resolutions, but the dramatic scaling indicates the RTX 5060's capabilities dictate the outcome.

GPU Role

The NVIDIA GeForce RTX 5060 is the star of this pairing, and its specifications explain the measured results. Built on the Blackwell 2.0 architecture with a 5 nm process, this GPU features 3,840 shading units, 120 texture mapping units, and 48 ROPs. Its 8 GB of GDDR7 memory operates at 1750 MHz (28 Gbps effective) across a 128-bit bus, yielding 448.0 GB/s of bandwidth. The boost clock of 2497 MHz and base clock of 2280 MHz contribute to a FP32 throughput of 19.18 TFLOPS.

The 8 GB VRAM capacity becomes a critical factor at 4K Ultra. The 43.4 FPS result suggests the GPU is either running out of memory or hitting severe bandwidth constraints, as the 448.0 GB/s bandwidth is modest for 4K workloads. The 128-bit bus width is notably narrow for a modern GPU targeting high-resolution gaming, and the data reflects this limitation. At 1080p, the memory subsystem is sufficient, as evidenced by 241.7 FPS at Low and 194 FPS at Medium. At 1440p, performance remains strong — 174 FPS at Low and 141.2 FPS at Medium — but the 4K results show the GPU's memory architecture is the primary constraint.

The GPU's passmark G3D score of 20,891 and percentile rank of 73 among all GPUs confirm its mid-high tier positioning. Its nearest rival, the AMD Radeon RX 7700 XT, scores 30,097 compared to the RTX 5060's 30,109, showing near-identical average performance. The RTX 5060's 30 RT cores and 120 tensor cores provide hardware support for ray tracing and DLSS, though the measured FPS data does not isolate these features' impact. The 145 W TDP and 300 W suggested PSU rating indicate this is a power-efficient design that should fit into most systems.

How This Combo Ranks

The AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5060 combination ranks 817th out of 1,741 tested combos in Downfall, placing it in the 53rd percentile of all configurations. This rank is notable because the GPU alone sits in the 73rd percentile of all GPUs, while the CPU is in the 84th percentile of all CPUs. The combination's lower rank relative to its components' individual percentiles suggests that Downfall is particularly demanding on the GPU, and the RTX 5060's memory limitations at higher resolutions drag the overall ranking down.

The data implies that this combo outperforms roughly half of all tested configurations in this game, which is respectable given that the RTX 5060 is a mid-range GPU. The rank also indicates that the pairing is well-balanced — neither component is dramatically over- or under-powered for the other. The CPU's 84th percentile ranking ensures it won't bottleneck the GPU in most scenarios, while the GPU's 73rd percentile ranking provides a solid foundation for 1080p and 1440p gaming. In the context of the full database, this combo sits in the upper-middle tier, with the 4K Ultra result of 43.4 FPS being the primary factor preventing a higher rank.

Measured FPS Breakdown

At 1920x1080, the combo delivers exceptional performance across all settings. Low settings produce 241.7 FPS, Medium reaches 194 FPS, High achieves 158.5 FPS, and Ultra maintains 101.8 FPS. These numbers indicate that 1080p gaming is a non-issue for this pairing, with even the most demanding preset clearing 100 FPS by a slim margin.

Moving to 2560x1440, the performance remains strong but shows expected declines. Low settings yield 174 FPS, Medium drops to 141.2 FPS, High manages 118.2 FPS, and Ultra falls to 73.5 FPS. The 1440p results demonstrate that this resolution is the practical ceiling for high-refresh-rate gaming with this combo, as Ultra stays above 60 FPS but not by a wide margin.

At 3840x2160, the performance collapse becomes apparent. Low settings produce 104.2 FPS, Medium achieves 90.1 FPS, High drops to 73.8 FPS, and Ultra plummets to 43.4 FPS. The 4K Ultra result is the only measured configuration below 60 FPS, making it the sole unplayable preset in the dataset. The progression from High (73.8 FPS) to Ultra (43.4 FPS) at 4K represents a 41.2% performance loss, which is substantial and indicates that the Ultra preset's additional visual effects are disproportionately expensive at this resolution.

Settings Recommendations

For 1920x1080, the Ultra preset at 101.8 FPS is the clear recommendation. This configuration provides the highest visual fidelity while maintaining a frame rate well above the 60 FPS threshold and close to 100 FPS, offering a smooth experience with all visual features enabled.

At 2560x1440, the High preset at 118.2 FPS offers the best balance. Ultra drops to 73.5 FPS, which is playable but leaves less headroom for demanding scenes. The High preset's 118.2 FPS result provides a 44.7 FPS buffer over Ultra, making it the safer choice for consistent performance without sacrificing significant visual quality.

For 3840x2160, the Low preset at 104.2 FPS is the only fully smooth option, but the Medium preset at 90.1 FPS is the best compromise for visual quality. High at 73.8 FPS is playable but approaches the edge of comfort, while Ultra at 43.4 FPS should be avoided entirely. The data suggests that 4K gaming requires significant settings compromises with this combo, and users prioritizing visual fidelity at this resolution would need a more powerful GPU.

CPU Role

The AMD Ryzen 7 5700 provides ample processing power for Downfall, and its specifications confirm it is not the limiting factor in this pairing. With 8 cores and 16 threads based on the Zen 3 architecture (Cezanne codename), this CPU operates at a base clock of 3.70 GHz and boosts to 4.60 GHz. Its 16 MB of L3 cache and 51.2 GB/s memory bandwidth support dual-channel DDR4 memory, which is sufficient for gaming workloads.

The CPU's benchmark results reinforce its capability. Its Cinebench R23 multi-core score of 20,655 and single-core score of 2,916 place it in the 84th percentile of all CPUs. The 3DMark results show strong scaling from 2 threads (1,762) to max threads (6,617), with the 16-thread score of 6,628 being nearly identical to the max-thread result of 6,617, indicating efficient multi-threading. The PassMark multi-thread score of 24,303 and single-thread score of 3,296 further confirm its balanced performance profile.

The CPU's nearest rivals — Intel Core i9-9900K, Intel Core i7-12700H, Intel Core i7-1370P, and AMD Ryzen AI 5 340 — all score within 1.2% of the Ryzen 7 5700, showing that this processor is competitive with both Intel and AMD alternatives. In Downfall specifically, the 1080p Low result of 241.7 FPS demonstrates that the CPU can feed the GPU at very high frame rates, and the consistent performance across resolutions indicates the CPU is never the bottleneck. Even at 4K Ultra where FPS drops to 43.4, the limitation is clearly the GPU's memory subsystem, not the CPU's processing power.