Downfall

The AMD Ryzen 5 7500F and AMD Radeon RX 6750 XT combination delivers a playable experience in Downfall, though the data reveals a system that is heavily influenced by both resolution and graphics settings. The pairing shows a clear performance ceiling at 4K, while lower resolutions expose the GPU's limitations as the primary constraint. This analysis breaks down the measured FPS data, the roles of the CPU and GPU, and how this specific combo ranks among the thousands of tested configurations.

Resolution Scaling

The measured FPS data for this combo shows a predictable yet steep decline as resolution increases, which is classic behavior for a system where the GPU becomes the bottleneck at higher pixel counts. At 1080p with Low settings, the combo achieves 240 FPS. Scaling up to 1440p Low drops the average to 172 FPS, and at 4K Low it falls further to 107 FPS. This represents a 133 FPS difference between 1080p and 4K at the lowest settings, indicating that the GPU is being pushed significantly harder at higher resolutions.

The pattern is consistent across all settings tiers. With High settings, the average FPS goes from 161 at 1080p, to 115 at 1440p, down to 72 at 4K. Medium settings show a similar trajectory: 197 FPS at 1080p, 140 FPS at 1440p, and 87 FPS at 4K. The Ultra preset is the most demanding, producing 101 FPS at 1080p, 72 FPS at 1440p, and a barely playable 45 FPS at 4K.

The scaling factor between resolutions is telling. Moving from 1080p to 1440p at High settings results in a 46 FPS drop (161 to 115), while moving from 1440p to 4K at the same settings results in a 43 FPS drop (115 to 72). The consistency of these deltas suggests that the GPU is the limiting factor throughout, as the workload scales roughly with pixel count. The data indicates that the CPU is not a major constraint at any resolution, as the FPS drops are directly proportional to the increase in pixel density.

At 4K, the gap between Low and Ultra settings is enormous — 107 FPS versus 45 FPS. This 62 FPS spread shows that the RX 6750 XT has enough headroom at 4K Low to produce smooth gameplay, but the Ultra preset overwhelms it. The 4K Medium setting, at 87 FPS, is the sweet spot for maintaining high frame rates at that resolution. The data suggests that players targeting 4K should stick to Medium or lower settings, while 1080p users can comfortably run Ultra with 101 FPS.

CPU Role

The Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, manufactured on a 5 nm process by TSMC. Its base clock is 3.70 GHz with a boost clock of 5.00 GHz, and it carries 32 MB of shared L3 cache. The CPU's benchmark scores are respectable, with a Cinebench R23 multicore score of 22799 and a single-core score of 3218, placing it in the 77th percentile of all CPUs tested.

In the context of Downfall, a horror game released in 2016, the CPU's role is likely secondary to the GPU. The measured data shows no scenario where the CPU appears to bottleneck the system, as FPS scales smoothly with resolution changes. The 12 threads provide ample multi-threading capability, and the high boost clock of 5.00 GHz ensures strong single-threaded performance, which is often critical for game logic and physics calculations.

The CPU's memory bandwidth is rated at 83.2 GB/s with dual-channel DDR5 support, which is sufficient for feeding the GPU at high frame rates. The Ryzen 5 7500F's 6 cores are enough for a game from this era, and the benchmark results indicate it sits close to rivals like the Intel Core i7-11850H (0.1% difference in average score) and the AMD Ryzen 5 8400F (-0.2% difference). This suggests that the CPU is not a limiting factor in this combo, and any performance differences between configurations are more likely attributable to the GPU.

How This Combo Ranks

The combination of the Ryzen 5 7500F and RX 6750 XT ranks 1695 out of 3716 tested combos in Downfall, placing it in the 54th percentile of all configurations. This is a mid-pack ranking, which aligns with the GPU's 71st percentile standing among all GPUs and the CPU's 77th percentile ranking. The combo's overall position suggests that while both components are above average individually, the pairing does not boost to the top tier in this specific game.

The ranking indicates that there are 2021 combos that perform better in Downfall, which is a substantial number. However, the measured FPS data shows that this combo is far from inadequate — it delivers 240 FPS at 1080p Low, which is exceptionally smooth. The mid-pack ranking is likely due to the fact that many higher-end GPUs and CPUs can push even higher frame rates at 4K Ultra, where this combo drops to 45 FPS.

The delta between this combo and the top performers is not specified, but the rank of 1695 out of 3716 suggests there is a wide spread of performance above this pairing. The data shows that this combo is best suited for 1080p and 1440p gaming, where it can achieve high frame rates, rather than 4K Ultra where it struggles.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo's performance across three resolutions and four settings presets. At 1920x1080, the Low preset delivers an average of 240 FPS, which is the highest recorded value for this combo. The Medium preset at 1080p produces 197 FPS with a minimum of 167 and a maximum of 226 FPS. High settings at 1080p yield 161 FPS, while Ultra drops to 101 FPS.

Moving to 2560x1440, the Low preset still manages a strong 172 FPS. Medium settings at 1440p average 140 FPS, with a minimum of 119 and a maximum of 162 FPS. High settings produce 115 FPS, and Ultra falls to 72 FPS. The 1440p results show that this combo is well-suited for high-refresh-rate gaming at this resolution, as even High settings clear the 100 FPS mark.

At 3840x2160, the GPU begins to show its limits. Low settings achieve 107 FPS, which is still smooth, but Medium drops to 87 FPS with a minimum of 74 and a maximum of 100 FPS. High settings average 72 FPS, and Ultra sinks to 45 FPS. The 4K data indicates that players should avoid Ultra settings entirely with this combo, as 45 FPS is below the threshold for comfortable gameplay in a horror title that may rely on smooth motion for atmosphere.

The Medium preset is the only one with both minimum and maximum FPS data provided across all three resolutions. At 1080p, the range is 167 to 226 FPS; at 1440p, it is 119 to 162 FPS; and at 4K, it is 74 to 100 FPS. These ranges show consistent frame delivery with no major stuttering, which is important for a horror game where frame pacing can impact the experience.

GPU Role

The AMD Radeon RX 6750 XT is built on the RDNA 2.0 architecture with the Navi 22 chip, manufactured on a 7 nm process by TSMC. It features 12 GB of GDDR6 memory on a 192-bit bus, providing 432.0 GB/s of bandwidth. The GPU has 2560 shading units, 160 texture mapping units, and 64 ROPs, with a boost clock of 2600 MHz and a game clock of 2495 MHz. The 12 GB of VRAM is a notable asset for a game like Downfall, which may have high-resolution textures.

The GPU's performance percentile is 71, meaning it outperforms 71% of all GPUs in the benchmark database. Its average benchmark score of 26011 places it close to rivals like the AMD Radeon R9 M395X (0.5% difference) and the NVIDIA GeForce RTX 3080 Ti Mobile (1.1% difference). The RX 6750 XT's 13.31 TFLOPS of FP32 performance and 416.0 GTexel/s texture rate are strong figures for a mid-range card.

In Downfall, the GPU's role is clearly the dominant factor in determining frame rates. The scaling from 1080p to 4K shows a consistent reduction in FPS that aligns with the increased pixel workload. The GPU's 12 GB VRAM is likely sufficient for all settings at 1080p and 1440p, but at 4K Ultra, the combination of high resolution and maximum settings may push memory usage to its limits, contributing to the 45 FPS result.

The GPU's 40 ray tracing cores are present but likely not heavily utilized in this 2016 title, which predates the widespread adoption of ray tracing. The card's DirectX 12 Ultimate support and Vulkan 1.4 compatibility ensure it can handle modern APIs, but the game's age means it may rely on older rendering paths. The data shows that the RX 6750 XT is the primary driver of performance, with the CPU providing sufficient support to avoid bottlenecking.

FAQ

*Q: What is the best resolution and settings combo for this system in Downfall?*

A: The data shows that 1080p Low delivers 240 FPS, while 1440p High achieves 115 FPS and 4K Medium hits 87 FPS. For a balance of visual quality and smoothness, 1440p High is the sweet spot, offering high frame rates without sacrificing too much detail.

*Q: Can this combo handle 4K gaming in Downfall?*

A: Yes, but with limitations. At 4K Low, the combo achieves 107 FPS, and 4K Medium produces 87 FPS. However, 4K Ultra drops to 45 FPS, which is below the ideal threshold for smooth gameplay. The data suggests sticking to Medium or lower settings at 4K.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 7500F has an average benchmark score of 24964, which is 0.1% higher than the Intel Core i7-11850H and 0.2% higher than the Intel Core i7-13620H. It is slightly behind the AMD Ryzen 5 8400F by -0.2%.

Q: Is the GPU a bottleneck at 1080p?

A: The data indicates the GPU is the primary limiter even at 1080p. The jump from 1080p Low (240 FPS) to 1440p Low (172 FPS) shows a 68 FPS drop, which is proportional to the pixel increase. The CPU's performance is sufficient, as evidenced by the smooth scaling.

Q: What is the FPS range at Medium settings across resolutions?

A: At 1080p Medium, the range is 167 to 226 FPS with an average of 197. At 1440p Medium, the range is 119 to 162 FPS with an average of 140. At 4K Medium, the range is 74 to 100 FPS with an average of 87.

Q: How does this combo rank overall in the database?

A: This combo ranks 1695 out of 3716 tested combos in Downfall, placing it in the mid-range of all configurations. This ranking reflects the GPU's 71st percentile and CPU's 77th percentile standings, indicating a solid but not top-tier pairing.