Downfall

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3060 Ti pairing is a classic mid-range desktop combination, and in Downfall it lands in the 1259th position out of 1741 tested combos. That places it in the lower-middle tier of the database, meaning it will run the game but will not deliver top-tier frame rates at maximum settings. The CPU is a 6-core, 12-thread Zen 3 part with a base clock of 3.50 GHz and a boost clock of 4.40 GHz, built on TSMC's 7 nm process. It has 32 MB of shared L3 cache and supports DDR4 memory in a dual-channel configuration. The GPU is an Ampere-based GA104 chip with 4864 shading units, 152 texture mapping units, and 80 raster output units, paired with 8 GB of GDDR6 memory on a 256-bit bus. The GPU's boost clock is 1665 MHz, and its memory runs at 14 Gbps effective.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 5600's six cores and twelve threads are sufficient for Downfall, a horror title that does not appear to scale heavily with core counts beyond eight threads. The CPU's single-thread performance is strong, as indicated by its 3DMark single-thread score of 882, and its multi-threaded capability is solid for a desktop chip, with a 3DMark max-thread score of 5659. In Cinebench R23, the chip scores 2584 points in single-core and 18309 in multi-core, which are respectable figures for this class of processor. The base and boost clocks of 3.50 GHz and 4.40 GHz provide enough headroom to keep up with the RTX 3060 Ti in most scenarios, but the data suggests that at lower resolutions, the CPU can become a limiting factor.

The benchmark results across resolutions show that at 1080p, the frame rates are high enough that CPU overhead starts to matter. At 1080p Low, the combo hits 189.2 FPS, which is a strong number, but the drop to 129.7 FPS at 1080p High indicates that the GPU is still doing most of the work. The CPU's 3DMark 2-thread score of 1737 and 4-thread score of 3313 suggest that it can handle the game's thread scheduling without bottlenecking, but the game's engine appears to favor higher clock speeds over more cores. The Ryzen 5 5600's boost clock of 4.40 GHz is adequate, but the data shows that the GPU becomes the primary constraint as resolution increases.

The CPU's 79th percentile ranking among all CPUs means it outperforms 79% of the tested processors in general benchmarks. Its nearest rivals include the Intel Xeon D-1746TER (0.6% faster), the AMD EPYC 9554P (0.6% slower), and the Intel Core i7-11700F (0.9% slower). These deltas are small, indicating that the Ryzen 5 5600 is well-positioned for gaming workloads. In Downfall, the CPU's role is to feed the GPU with frames, and at 1080p, the 189.2 FPS Low result shows it can do that effectively. However, the CPU's 65 W TDP and 7 nm process node mean it runs cool and efficient, leaving headroom for the GPU to be the performance bottleneck.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

*Q: What is the best resolution for this combo in Downfall?*

A: The data shows that 1440p High is the sweet spot, delivering 93.5 FPS. This balances visual quality with frame rate, as 1080p High yields 129.7 FPS and 4K High drops to 54.5 FPS. The 1440p result is well above the 60 FPS threshold, while 4K Ultra is unplayable at 33.6 FPS.

Q: How does the RTX 3060 Ti compare to its nearest rivals in general GPU benchmarks?

A: The RTX 3060 Ti scores 25120 on average, which is 0.2% behind the AMD Radeon RX 6700M (25180), 0.5% behind the AMD Radeon RX 6600 (25235), and 0.7% behind the AMD Radeon RX 580 2048SP (25287). This shows it is within 1% of these competing GPUs in aggregate performance.

Q: What settings should I use for a 60 FPS target at 4K?

A: At 4K, the Medium preset achieves 73 FPS, while High dips to 54.5 FPS and Ultra falls to 33.6 FPS. For a stable 60 FPS experience at 4K, the Medium preset is the only viable option, as it stays above 60 FPS without dropping to the sub-60 territory of High.

Q: Is the Ryzen 5 5600 a bottleneck for the RTX 3060 Ti in this game?

A: The data suggests the CPU is not a significant bottleneck at higher resolutions. At 1440p, the frame rates scale from 137.6 FPS on Low to 54.8 FPS on Ultra, indicating the GPU is the limiting factor. At 1080p, the 189.2 FPS Low result shows the CPU can push high frame rates, but the gap between Low and Ultra (189.2 vs 77.9 FPS) is driven by GPU load.

*Q: What is the combo's rank among all tested combinations in Downfall?*

A: The combo ranks 1259th out of 1741 tested combinations, placing it in the 72nd percentile of all combos. This means it outperforms roughly 72% of the tested systems in this game, but it is far from the top-tier configurations.

Q: How does the CPU's multi-threaded performance compare to its peers?

A: In Cinebench R23 multi-core, the Ryzen 5 5600 scores 18309, which is 0.6% faster than the Intel Xeon D-1746TER and 0.9% faster than the Intel Core i7-11700F, but 0.6% slower than the AMD EPYC 9554P. These are all within a 1% margin, so the CPU is competitive with its price-adjacent rivals.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for Downfall shows a clear pattern of GPU-bound performance as resolution increases. At 1080p Low, the combo achieves 189.2 FPS, but at 4K Low, it drops to 86.5 FPS—a reduction of 54.3% from 1080p. This is a massive drop that is characteristic of a GPU-limited scenario, where the RTX 3060 Ti's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are being saturated. The GPU's 16.20 TFLOPS of FP32 performance and 253.1 GTexel/s texture rate are the primary factors driving these numbers.

At High settings, the scaling is even more pronounced: 129.7 FPS at 1080p drops to 93.5 FPS at 1440p (a 27.9% decrease) and then to 54.5 FPS at 4K (a 58.0% decrease from 1080p). The frame rate drops nearly linearly with pixel count, which is a hallmark of GPU-bound rendering. The CPU's role here is minimal, as the Ryzen 5 5600's 3DMark 8-thread score of 4798 and Cinebench R15 multi-core score of 1845 are more than enough to keep up with the GPU's output at these resolutions.

The Ultra preset tells a different story. At 1080p Ultra, the combo hits 77.9 FPS, but 1440p Ultra drops to 54.8 FPS and 4K Ultra falls to 33.6 FPS. The gap between 1080p and 4K at Ultra is 56.9%, which is similar to the Low preset's drop. This consistency across settings confirms that the GPU is the bottleneck, not the CPU. The RTX 3060 Ti's 80 ROPs and 133.2 GPixel/s pixel rate are the limiting factors at higher resolutions, as the game's horror visuals demand more fill rate and memory bandwidth as pixel count increases.

The data indicates that at 1080p, the CPU can push frame rates beyond 150 FPS, but the GPU's rendering capabilities cap the performance. At 4K, the GPU is entirely the limiting component, with the CPU sitting idle waiting for the GPU to finish rendering frames. This is a typical pattern for a mid-range GPU like the RTX 3060 Ti, which has 8 GB of VRAM and a 256-bit memory bus, both of which are stressed at 4K.

Settings Recommendations — which preset gives the best experience per the measured rows

For the best experience in Downfall with this combo, the High preset at 1440p is the recommended choice. The measured 93.5 FPS at 1440p High is well above the 60 FPS target for smooth gameplay, and it provides a significant visual upgrade over the Low preset without the performance hit of Ultra. At 1080p, the High preset delivers 129.7 FPS, which is excellent for high-refresh-rate monitors, but the 1440p High result offers a better balance of resolution and frame rate.

If you are targeting a 60 FPS experience at 4K, the Medium preset is the only option, as it delivers 73 FPS. The High preset at 4K dips to 54.5 FPS, which is below the 60 FPS threshold, and Ultra is unplayable at 33.6 FPS. The Medium preset at 4K is a viable choice for users with 4K displays who prioritize frame rate over maximum visual fidelity.

At 1080p, the Ultra preset is playable at 77.9 FPS, but the jump from High to Ultra only adds visual fidelity at the cost of 51.8 FPS (from 129.7 to 77.9). This is a steep drop for a marginal visual improvement, so the High preset is the better value. The Low preset at 1080p hits 189.2 FPS, but the visual quality is likely too compromised for a horror game where atmosphere matters. The Medium preset at 1080p delivers 156.9 FPS, which is a good middle ground, but High provides the best balance of visual quality and performance.

The data shows that the RTX 3060 Ti is not capable of handling Ultra settings at 1440p or 4K at acceptable frame rates. The 54.8 FPS at 1440p Ultra is just below the 60 FPS line, and the 33.6 FPS at 4K Ultra is unplayable. Therefore, the High preset is the best recommendation for most users, as it provides a smooth experience at both 1080p and 1440p, and the Medium preset is the fallback for 4K.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 5 5600 + NVIDIA GeForce RTX 3060 Ti combo ranks 1259th out of 1741 tested combinations in Downfall. This places it in the bottom 28% of all combos, which is a lower position than its individual component rankings might suggest. The CPU ranks in the 79th percentile among all CPUs, and the GPU ranks in the 69th percentile among all GPUs, but the combination's overall ranking is dragged down by the demanding nature of the game at higher settings.

The combo's rank of 1259 means that 482 other combinations perform better in this game, likely those with higher-end GPUs like the RTX 3070 or better, or CPUs with higher boost clocks. The data shows that the combo is competitive at 1080p, where it delivers 189.2 FPS on Low, but it falls behind at 4K Ultra, where the 33.6 FPS result is in the bottom tier of playable frame rates. The GPU's 8 GB of VRAM is a limiting factor at 4K, as the game's textures and effects are likely to exceed this capacity at Ultra settings.

Compared to its nearest GPU rivals, the RTX 3060 Ti is within 0.7% of the AMD Radeon RX 580 2048SP in average benchmark scores, but the RX 580 2048SP has 8 GB of GDDR5 memory, which is slower than the GDDR6 on the RTX 3060 Ti. The combo's rank suggests that it is well-suited for 1080p gaming but not for 4K or high-refresh-rate 1440p gaming at maximum settings. The 1259th rank is a reflection of the GPU's mid-range positioning, as the CPU is clearly not the bottleneck.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data for Downfall shows the following results for this combo:

1920x1080 (1080p):

• Low: 189.2 FPS
• Medium: 156.9 FPS
• High: 129.7 FPS
• Ultra: 77.9 FPS

At 1080p, the combo delivers high frame rates across all settings, with the Low preset exceeding 180 FPS and the Ultra preset still clearing 75 FPS. The gap between Low and Ultra is 111.3 FPS, indicating that the GPU is the primary constraint as settings increase.

2560x1440 (1440p):

• Low: 137.6 FPS
• Medium: 111.4 FPS
• High: 93.5 FPS
• Ultra: 54.8 FPS

At 1440p, the frame rates drop by approximately 27-30% compared to 1080p at each settings level. The Low preset remains above 120 FPS, but the Ultra preset falls below 60 FPS, making it borderline for smooth gameplay.

3840x2160 (4K):

• Low: 86.5 FPS
• Medium: 73 FPS
• High: 54.5 FPS
• Ultra: 33.6 FPS

At 4K, the combo struggles to maintain 60 FPS at High settings, and the Ultra preset is unplayable at 33.6 FPS. The Low preset is the only option that stays above 80 FPS, while the Medium preset is the only one that clears 60 FPS. The drop from 1080p Low to 4K Low is 102.7 FPS, which represents a 54.3% reduction in performance.