Archeage

The Intel Core Ultra 9 275HX paired with the NVIDIA GeForce RTX 5050 delivers a playable Archeage experience primarily at 1080p, with the data showing a clear performance ceiling at higher resolutions. The measured frames per second (FPS) across the board indicate that this combination is best suited for 1080p gaming, where it can achieve high frame rates, while 4K remains largely out of reach for smooth gameplay.

Settings Recommendations

The benchmark data for this combo reveals a clear hierarchy of performance across the four tested presets. At 1920x1080, the Low preset produces an average of 112 FPS, which is the highest frame rate recorded for this configuration. The Medium preset follows closely with an average of 100 FPS and a minimum of 85 FPS, offering a significant improvement in visual fidelity for a modest 12 FPS drop. The High preset yields 68 FPS, which is still smooth, but the Ultra preset drops to 46 FPS, indicating a substantial performance cost for the highest settings.

Given these results, the Medium preset at 1080p provides the best balance of visual quality and performance. The 100 FPS average ensures a fluid experience, while the minimum of 85 FPS indicates that frame pacing remains consistent even in demanding scenes. While Low offers a higher average, the jump to Medium is relatively small in frame rate cost but typically represents a large gain in visual detail, making it the optimal choice for this hardware combination.

At 2560x1440, the situation changes. The Low preset achieves 76 FPS, which is acceptable, but the Medium preset drops to 67 FPS with a minimum of 57 FPS. The High preset falls to 46 FPS, and Ultra drops to 31 FPS. For 1440p, the Medium preset is still the recommended choice, as the 67 FPS average is above the threshold for smooth play, and the minimum of 57 FPS suggests it can handle most situations. However, users who prioritize frame rate over detail might opt for Low to maintain a higher margin.

The data shows that the Ultra preset is not viable at any resolution for this combo, as it only reaches a maximum average of 46 FPS at 1080p and falls to an unplayable 18 FPS at 4K. Therefore, the analysis points to Medium as the "best experience" preset, providing a high frame rate at 1080p and a playable one at 1440p, without the severe performance penalties of Ultra.

GPU Role

The NVIDIA GeForce RTX 5050 is the primary component limiting performance at higher resolutions in Archeage. The GPU's specifications are directly reflected in the measured frame rates. With 8 GB of GDDR6 memory on a 128-bit bus, the bandwidth is 320.0 GB/s, which is a modest figure for handling the texture and geometry loads of a modern MMORPG at high resolutions. The benchmark results show a clear pattern: as resolution increases, frame rates drop significantly, which is a classic sign of GPU-bound performance.

The RTX 5050's core clocks are a base of 2317 MHz and a boost of 2572 MHz. These clocks, combined with its 2560 shading units, produce a pixel rate of 82.30 GPixel/s and a texture rate of 205.8 GTexel/s. These figures are adequate for 1080p, but the data shows they are insufficient for maintaining high frame rates at 4K. For instance, at 3840x2160, the High preset only averages 26 FPS, while the Low preset manages 43 FPS. The performance gap between Low and High at 4K (43 vs 26 FPS) suggests that the raw shading and texture throughput of the GPU becomes the bottleneck when the pixel count increases dramatically.

The GPU's position in the benchmark database, at the 66th percentile among all GPUs, confirms its mid-range standing. Its performance is very close to the AMD Radeon RX Vega M GL, with a deltaPct of -0.6, and the AMD Radeon HD 8970M, with a deltaPct of -1. This indicates that the RTX 5050 is a competent but not high-end part. The data shows that while it can handle 1080p and 1440p gaming, the 4K results are consistently below 45 FPS, making it unsuitable for that resolution in this title. The measured FPS at 1080p High (68 FPS) versus 4K High (26 FPS) represents a 62% drop, highlighting the GPU's limitations as the primary constraint.

CPU Role

The Intel Core Ultra 9 275HX is a high-end mobile processor, and its specifications suggest it is more than capable of feeding the RTX 5050 in Archeage. The CPU features 24 cores and 24 threads, with a base clock of 2.70 GHz and a boost clock of 5.40 GHz. This high core count and boost capability are relevant for an MMORPG, which often has many players and non-player characters on screen, creating a substantial CPU workload for game logic and network processing.

The CPU's benchmark scores are strong, placing it in the 94th percentile among all CPUs. Its average benchmark score of 67469 is nearly identical to its nearest rivals, including the Intel Xeon w5-3525 and the AMD EPYC 4484PX, with deltaPct values of -0.3 and -0.5, respectively. This suggests that the Ultra 9 275HX has ample computational headroom. In the context of this combo, the CPU's role is to ensure that frame rates are not limited by single-thread or multi-thread processing bottlenecks.

The data supports the conclusion that the CPU is not the limiting factor in this pairing. For example, at 1920x1080 with the Low preset, the combo achieves 112 FPS. If the CPU were the bottleneck, we would expect to see inconsistent performance across different settings at the same resolution. Instead, the frame rates scale predictably with the GPU load: 112 FPS at Low, 100 FPS at Medium, and 68 FPS at High. This scaling pattern indicates that the GPU is the component determining the final frame rate, while the CPU has the headroom to process the game's logic without becoming a constraint. The CPU's high PassMark multithread score of 55759 further confirms its ability to handle the parallel workloads of a modern MMORPG, ensuring that the RTX 5050 is the component that dictates the performance ceiling.

How This Combo Ranks

In the database of tested hardware combinations, this specific pairing of the Intel Core Ultra 9 275HX and NVIDIA GeForce RTX 5050 holds a rank of 2213 out of 2761 total combos for Archeage. This places it in the lower half of tested configurations, which is a direct consequence of the GPU's mid-range performance characteristics.

The combo's rank is lower than what the CPU alone might suggest. The Ultra 9 275HX is a top-tier processor, but the RTX 5050's performance, which sits near the 66th percentile for GPUs, drags the overall gaming performance down. This is a classic scenario where a powerful CPU is paired with a mid-range GPU, resulting in a system that is well-balanced for 1080p gaming but not for higher resolutions. The rank of 2213 indicates that while it is not a bottom-tier configuration, many other combos with more powerful GPUs will deliver significantly better frame rates in this game.

The data shows that the performance of this combo is heavily influenced by the GPU's limitations. While the CPU provides a strong foundation, the measured FPS results are consistently in line with what one would expect from a GPU of the RTX 5050's caliber. The fact that the combo ranks in the 80th percentile of all combos (100 - (2213/2761)*100) underscores that there is substantial headroom for improvement by pairing the same CPU with a faster GPU. This ranking provides context for the measured FPS, showing that users of this specific combo are likely experiencing performance that is typical for a mid-range gaming laptop.

Resolution Scaling

The measured data demonstrates a stark and predictable impact of resolution on performance. The frame rates drop precipitously as the resolution increases from 1920x1080 to 3840x2160. For a given preset, the performance degradation is substantial. Taking the Medium preset as an example, the average FPS goes from 100 at 1080p, to 67 at 1440p, and finally to 38 at 4K. This represents a 33% drop from 1080p to 1440p, and a further 43% drop from 1440p to 4K.

This scaling pattern is a clear indicator that the system is GPU-limited. The number of pixels being rendered increases by a factor of 2.25 from 1080p to 1440p, and by a factor of 4 from 1080p to 4K. The fact that the frame rate does not decrease proportionally to the pixel count increase is interesting. For instance, the pixel count quadruples from 1080p to 4K, but the FPS on Medium only drops from 100 to 38, which is a 62% reduction. This discrepancy suggests that while the GPU is the main bottleneck, it is not a purely pixel-bound scenario; other factors like memory bandwidth and fill rate play a role in the scaling.

The data shows that the drop from 1080p to 1440p is the most impactful step, with reductions of 30-40% depending on the preset. The drop from 1440p to 4K is slightly less severe in percentage terms but leads to unplayable frame rates. For example, the High preset drops from 46 FPS at 1440p to 26 FPS at 4K. The Ultra preset, which was already at 46 FPS at 1080p, falls to 31 FPS at 1440p and a meager 18 FPS at 4K. The analysis of this scaling confirms that this combo is designed for 1080p gaming, with 1440p being a stretch, and 4K being largely impractical for anything but the lowest settings.

FAQ

Q: What is the best resolution to play Archeage with this hardware?

A: Based on the measured FPS, 1920x1080 is the optimal resolution. At this resolution, the combo achieves an average of 100 FPS on Medium settings and 112 FPS on Low, which provides a smooth and responsive experience. Performance at 2560x1440 is playable but with a significant frame rate reduction, while 3840x2160 results in average frame rates below 45 FPS across all settings.

Q: How does the RTX 5050 compare to its closest rivals?

A: The RTX 5050's average benchmark score is 21035, placing it very close to the AMD Radeon RX Vega M GL, which has a deltaPct of -0.6, and the AMD Radeon HD 8970M, which has a deltaPct of -1. It is slightly ahead of the AMD Radeon RX 5600 XT, with a deltaPct of 1.6. This indicates it is a mid-range GPU with performance comparable to older high-end mobile parts.

Q: Is the Intel Core Ultra 9 275HX a bottleneck for this game?

A: The data suggests the CPU is not the bottleneck. The frame rates scale consistently with the GPU load when changing settings at 1080p, from 112 FPS on Low to 46 FPS on Ultra. If the CPU were limiting, the frame rates would be more consistent across different settings. The CPU's high benchmark scores, including a 94th percentile ranking, support its capability to keep up with the GPU.

Q: What is the average FPS on Medium settings at 1440p?

A: The measured average FPS for the Medium preset at 2560x1440 is 67 FPS. The data also includes a minimum FPS of 57 and a maximum FPS of 77, indicating a playable range with occasional dips.

Q: Can this combo handle Ultra settings in Archeage?

A: The data shows that Ultra settings are not recommended for this combo. The highest average FPS on Ultra is 46 at 1920x1080, which is borderline for smooth play. At higher resolutions, the performance degrades to 31 FPS at 1440p and 18 FPS at 4K, which are not playable.

Q: How much of a performance drop is there from 1080p to 4K?

A: The performance drop is substantial. For example, on the High preset, the average FPS drops from 68 at 1080p to 26 at 4K, a reduction of 62%. On the Medium preset, the drop is from 100 to 38 FPS, which is also a 62% reduction. This large drop confirms that the GPU is the primary limiting factor at higher resolutions.

Measured FPS Breakdown

The following table details the exact measured average FPS for each resolution and settings combination. Where available, minimum and maximum FPS values are also provided.

| Resolution | Settings | Average FPS | Minimum FPS | Maximum FPS |

| :--------- | :------- | :---------- | :---------- | :---------- |

| 3840x2160 | High | 26 | N/A | N/A |

| 3840x2160 | Low | 43 | N/A | N/A |

| 3840x2160 | Medium | 38 | 33 | 44 |

| 3840x2160 | Ultra | 18 | N/A | N/A |

| 2560x1440 | High | 46 | N/A | N/A |

| 2560x1440 | Low | 76 | N/A | N/A |

| 2560x1440 | Medium | 67 | 57 | 77 |

| 2560x1440 | Ultra | 31 | N/A | N/A |

| 1920x1080 | High | 68 | N/A | N/A |

| 1920x1080 | Low | 112 | N/A | N/A |

| 1920x1080 | Medium | 100 | 85 | 115 |

| 1920x1080 | Ultra | 46 | N/A | N/A |

The data shows a consistent pattern: the Low preset provides the highest frame rates at every resolution, while the Ultra preset provides the lowest. The Medium preset offers a balanced middle ground, and the High preset is a moderate step down from Medium. The minimum FPS data for the Medium preset suggests that frame pacing is stable, with lows that are not dramatically lower than the average. This breakdown provides a complete picture of the combo's capabilities, confirming that 1080p is the only resolution where all presets are at least marginally playable.