Archeage

Archeage is an older MMORPG, and the benchmark results for the Intel Core Ultra 5 245 paired with the NVIDIA GeForce RTX 5070 Ti show a classic pattern of performance scaling across resolutions. The data reveals that this combination is exceptionally strong at 1080p, but the demands of 4K Ultra settings prove to be a significant challenge, even for this high-end hardware. The frame rates indicate a system that is heavily influenced by both the CPU's single-thread performance and the GPU's raw throughput, depending on the resolution and settings chosen.

Resolution Scaling

The measured FPS data shows a clear and expected decline as resolution increases, but the rate of that decline is telling. At 1080p with Low settings, the combo achieves an average of 254 FPS. Moving to 1440p Low drops this to 171 FPS, a reduction of 83 FPS. The jump to 4K Low results in 98 FPS, a further 73 FPS drop. This pattern suggests that at lower resolutions, the system is not fully constrained by the GPU, and the CPU's performance is a significant factor in maintaining high frame rates.

The scaling from 1080p to 1440p on High settings shows a drop from 153 FPS to 103 FPS, a 50 FPS decrease. The transition from 1440p High to 4K High is less severe in absolute terms, dropping from 103 FPS to 59 FPS, a 44 FPS decrease. This indicates that as the resolution increases, the workload shifts more decisively onto the GPU. The 4K High result of 59 FPS is just below the 60 FPS threshold that many consider the minimum for a smooth experience, highlighting the significant cost of running this title at 4K.

The most demanding setting, Ultra, illustrates the limits of this configuration. At 1080p Ultra, the average FPS is 105. At 1440p Ultra, it falls to 70 FPS. At 4K Ultra, the system manages only 40 FPS. This steep decline from 1080p to 4K at Ultra settings, a 65 FPS drop, confirms that the RTX 5070 Ti, despite its capabilities, is overwhelmed by the combination of 4K resolution and maximum graphical fidelity in Archeage. The data shows that the limiting component at 4K Ultra is unequivocally the GPU, as the frame rate drops to a level that is not consistently playable.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is a powerful card, and its specifications support the performance seen in the benchmarks. It features 16 GB of GDDR7 memory on a 256-bit bus, providing a memory bandwidth of 896.0 GB/s. This substantial bandwidth is crucial for handling the high-resolution textures and data streams required at 4K. The GPU's boost clock is rated at 2452 MHz, with a base clock of 2295 MHz, and it is built on TSMC's 5 nm process with a transistor count of 45,600 million.

The GPU's benchmark scores are strong, with a Passmark G3D score of 32974 and a 3DMark Steel Nomad DX12 score of 6604. Its average benchmark score is 49957, placing it in the 86th percentile of all GPUs. When compared to its nearest rivals, the data shows a close competition: it is 0.1% slower than the AMD Radeon RX Vega 64, but 0.4% faster than the Intel Arc A550M. It also outperforms the AMD Radeon RX 6800 XT by 3.1%, but trails the AMD Radeon RX 6900 XT by 2%.

The GPU's role in these game results is most apparent in the 4K benchmarks. The drop from 98 FPS at 4K Low to 40 FPS at 4K Ultra is a 59% decrease in performance, a massive hit that is almost entirely attributable to the GPU's rendering load. The high VRAM capacity of 16 GB ensures that capacity is not a limiting factor at these settings, but the sheer computational demand of 4K Ultra is beyond what the card can deliver for a consistently smooth framerate in this title. The 4K Medium result of 87 FPS, with a minimum of 74 FPS, shows that dialing back settings can unlock playable performance, but the card's limits at maximum settings are clear.

How This Combo Ranks

The Intel Core Ultra 5 245 and NVIDIA GeForce RTX 5070 Ti combination ranks 351st out of 3708 tested combos for Archeage. This places it in the top 9.5% of all tested configurations, a strong result that underscores the overall capability of this pairing. The high rank is likely driven by the excellent performance at 1080p and 1440p, where the system can push very high frame rates.

This ranking suggests that while this is not the absolute top-tier setup for Archeage, it is a very high-performing one. The fact that it ranks in the 351st position out of thousands of combos means it outperforms the vast majority of systems that have been benchmarked with this game. The performance data supports this, as the system is capable of exceeding 150 FPS at 1080p High and maintaining over 100 FPS at 1440p High. The 4K Ultra result of 40 FPS, while low, is a specific stress point that is shared by many systems, preventing the combo from ranking even higher.

FAQ

Q: What is the best resolution to play Archeage with this hardware for a high refresh rate monitor?

A: The data shows that at 1080p High settings, the system produces 153 FPS, and at 1440p High, it produces 103 FPS. For a 144Hz monitor, 1080p High is the clear choice, while 1440p High is suitable for a 100Hz or 120Hz display.

Q: Can this system handle 4K gaming in Archeage?

A: Yes, but with compromises. At 4K Medium settings, the average FPS is 87, which is playable. However, at 4K Ultra, the average FPS drops to 40, which is not a smooth experience. For 4K, Medium settings are the practical ceiling for consistent performance.

Q: How does the CPU's benchmark performance compare to its rivals?

A: The Intel Core Ultra 5 245 has an average benchmark score of 48995, which is nearly identical to its closest rivals. It is 0.4% slower than the AMD Ryzen 7 PRO 5755G and 0.5% slower than the AMD Ryzen 9 7900. Conversely, it is 0.6% faster than the Intel Xeon Gold 5318H and 0.8% faster than the Intel Core i5-14600K.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 1440p, the average FPS at Low settings is 171, while at Ultra settings it is 70. This represents a 101 FPS drop, or roughly a 59% reduction in performance, when moving from the lowest to the highest preset.

Q: Is the GPU more of a bottleneck at 1080p or 4K?

A: The data indicates the GPU becomes the primary bottleneck at 4K. At 1080p Low, the system achieves 254 FPS, suggesting the CPU is helping to drive high frame rates. At 4K Ultra, the frame rate falls to 40 FPS, a massive drop that points to the GPU being unable to handle the rendering load at that resolution and settings combination.

Q: What is the minimum FPS recorded for this combo in the benchmark data?

A: The only settings with a recorded minimum FPS are Medium. At 1080p Medium, the minimum is 192 FPS, at 1440p Medium it is 129 FPS, and at 4K Medium it is 74 FPS.

CPU Role

The Intel Core Ultra 5 245 is a 14-core, 14-thread processor based on the Arrow Lake architecture, built on a 3 nm process. It has a base clock of 3.50 GHz and a boost clock of 5.10 GHz. This processor has 24 MB of shared L3 cache and supports dual-channel DDR5 memory. Its benchmark scores are strong, with a Cinebench R23 multi-core score of 32924 and a single-core score of 4648. The Passmark single-thread score is 4394, and the multithread score is 38706.

The CPU's role is most evident at lower resolutions. At 1080p Low, the system produces 254 FPS, a figure that is so high it is likely limited by the CPU's ability to feed the GPU with draw calls and game logic updates. The CPU's strong single-thread performance, as evidenced by its scores, is critical for an MMORPG like Archeage. The processor's average benchmark score of 48995 puts it in the 90th percentile of all CPUs. It is nearly identical in performance to its nearest rivals, being 0.4% slower than the AMD Ryzen 7 PRO 5755G and 0.8% faster than the Intel Core i5-14600K.

As resolution increases, the CPU's influence on the average FPS diminishes, but it still plays a role. The transition from 1080p Medium (226 FPS) to 1440p Medium (152 FPS) shows a drop that is more attributable to the GPU's workload. The data suggests that for this game, the Core Ultra 5 245 provides sufficient processing power to avoid being the primary bottleneck at 1440p, but it is a key contributor to the extremely high frame rates seen at 1080p.

Settings Recommendations

The measured FPS data provides a clear guide for the best settings to use with this hardware. The primary goal is to maintain an average FPS that is comfortably above 60, and ideally much higher for competitive or smooth gameplay.

For 1080p gaming, the Ultra preset is viable, with an average FPS of 105. However, the High preset provides a significant boost to 153 FPS, which is a more optimal choice for high refresh rate monitors. The Medium preset at 226 FPS and Low at 254 FPS are excellent for competitive play, but they sacrifice visual quality. For the best balance of visual fidelity and performance at 1080p, the High preset is the recommended choice.

At 1440p, the High preset delivers an average of 103 FPS, making it the best option for a high-refresh-rate 1440p monitor. The Medium preset at 152 FPS offers even higher frame rates if desired, but the visual difference may be noticeable. The Ultra preset at 70 FPS is playable but not ideal, as it is close to the 60 FPS threshold. For 1440p, High is the recommended preset to get the most out of the system without compromising the experience.

At 4K, the options are more constrained. The Ultra preset is not recommended, as the 40 FPS average is too low for a smooth experience. The High preset at 59 FPS is borderline, often dipping below the 60 FPS target. The Medium preset, with an average of 87 FPS and a minimum of 74 FPS, is the clear recommendation for 4K gaming. It provides a solid, playable frame rate while still offering a significant visual upgrade over Low settings. For 4K, Medium is the best choice to ensure a consistently smooth experience.