Archeage

The Intel Core i7-14700K paired with the Intel Arc B580 presents a specific performance profile in Archeage, a 2014 MMORPG. The data shows a combination where the GPU’s capabilities are the primary bottleneck at higher resolutions and settings, while the CPU’s high core count and clock speeds ensure that frame rates remain playable at lower presets.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B580 operates at a consistent base and boost clock of 2670 MHz, paired with 12 GB of GDDR6 memory on a 192-bit bus, delivering a bandwidth of 456.0 GB/s. In Archeage, this configuration yields a PassMark G3D score of 15748, placing the GPU in the 66th percentile of all GPUs. This performance level is closely matched by the AMD Radeon 760M, which scores 22999 on average, a delta of just 0.1 percent from the Arc B580’s average benchmark score of 23021. The data indicates that the Arc B580 is effectively a mid-range performer; it is also a 0.7 percent delta behind the NVIDIA GeForce RTX 4060, which averages 23181.

The VRAM allocation of 12 GB is sufficient for Archeage’s asset streaming, as the game’s release date of 2014 predates the heavy texture loads of modern titles. The benchmark results show that at 4K (3840x2160) resolution, the GPU’s limits become apparent: the average frame rate at High settings is 26.3 FPS, which is below the threshold for smooth gameplay. The GPU’s compute capabilities, measured at a PassMark GPU Compute score of 7729, do not translate into high frame rates in this MMORPG when the resolution is pushed. The data suggests that the Arc B580’s raw rasterization throughput, calculated at 13.67 TFLOPS, is not the limiting factor; rather, the game’s optimization for this architecture plays a role. The frame rate at Ultra settings drops to 22.9 FPS at 4K, showing that the GPU’s 80 ROPs cannot keep up with the pixel fill rate demands of 213.6 GPixel/s at that resolution.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured frame rates across resolutions reveal a clear scaling pattern. At 1080p (1920x1080) with Low settings, the combo achieves 126.5 FPS, but this drops to 82 FPS at 1440p (2560x1440) and further to 49 FPS at 4K (3840x2160). This represents a 61 percent reduction in frame rate from 1080p Low to 4K Low. The scaling is more severe at High settings: 78.1 FPS at 1080p falls to 49.4 FPS at 1440p, and then to 26.3 FPS at 4K, a 66 percent drop from the 1080p figure.

This decline is characteristic of a GPU-bound scenario at higher resolutions. The Arc B580’s memory bandwidth of 456.0 GB/s becomes a limiting factor as the number of pixels increases, requiring more data to be fetched per frame. At 1080p, the CPU has enough headroom to feed the GPU, but as resolution increases, the GPU’s pixel throughput caps the performance. The data shows that the difference between Medium and High settings at 4K is only 18.1 FPS (44.4 vs 26.3), which is a smaller gap than at 1440p, where Medium yields 74.3 FPS and High yields 49.4 FPS. This suggests that at 4K, the GPU is so saturated that settings changes have a diminished impact on frame rate. The limiting component is definitively the Arc B580, as the CPU’s performance metrics, including a Cinebench R23 multi-core score of 44534, indicate it is not the bottleneck in this resolution range.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i7-14700K features 20 cores and 28 threads, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. This configuration places the CPU in the 96th percentile of all CPUs, with an average benchmark score of 70074. In the context of Archeage, an MMORPG with many simultaneous player characters and world events, the CPU’s multi-threading capabilities are directly relevant. The Cinebench R23 multi-core score of 44534 and Geekbench multi-core score of 18896 indicate strong parallel processing power, which helps maintain frame rates in crowded areas.

The CPU’s nearest rivals show its competitive position. It is essentially tied with the Intel Core i7-14700KF, which scores 70104, a delta of 0 percent. It trails the AMD EPYC 9115 by only 0.3 percent, which scores 69887, and the AMD Ryzen 9 9950X by 0.5 percent, which scores 70420. The data shows that the i7-14700K is a top-tier processor, and its performance does not constrain the measured frame rates in Archeage. At 1080p Low settings, the combo achieves 126.5 FPS, which is a high frame rate, but the CPU’s single-thread performance, evidenced by a PassMark single-thread score of 4472, ensures that the game’s main thread is not stalled. The 33 MB of shared L3 cache also aids in keeping frequently accessed game data close to the cores. The CPU’s 125 W TDP does not affect the benchmark results, but its high core count ensures that background tasks do not interfere with game performance. The data indicates that the CPU is not the limiting factor; even at 1080p, where CPU load is typically highest, the frame rates are only constrained by the GPU’s ability to render frames.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS rows, the optimal settings depend on the target resolution and desired frame rate. At 1080p, the Low preset delivers the highest average frame rate at 126.5 FPS, which is ideal for competitive play or high-refresh-rate displays. The Medium preset at 109.2 FPS is also excellent, offering a more visually detailed experience with only a 17.3 FPS penalty compared to Low. The High preset at 78.1 FPS is still smooth for an MMORPG, but the Ultra preset drops to 49 FPS, which is a significant reduction and may feel sluggish in fast-paced combat.

At 1440p, the Medium preset provides the best balance, achieving 74.3 FPS, which is playable and visually superior to Low (82 FPS). The High preset at 49.4 FPS is borderline, but the Ultra preset at 35.6 FPS is not recommended for smooth gameplay. At 4K, the data shows that the Low preset is the only playable option, yielding 49 FPS, while High (26.3 FPS), Medium (44.4 FPS), and Ultra (22.9 FPS) are all below acceptable thresholds. For the best experience, the data suggests that 1080p Medium or 1440p Medium are the sweet spots, as they provide high frame rates while maintaining visual fidelity. The Ultra preset is consistently the worst performer across all resolutions, showing a 61 percent drop from High at 1080p (49 vs 78.1 FPS), indicating that it is not optimized for this GPU.

FAQ

Q: What is the average frame rate for this combo at 1080p with High settings?

A: The measured average frame rate is 78.1 FPS at 1920x1080 resolution with the High preset.

Q: How does the Intel Arc B580 compare to the NVIDIA GeForce RTX 4060 in average benchmark score?

A: The Arc B580 has an average benchmark score of 23021, which is 0.7 percent lower than the RTX 4060’s average score of 23181.

Q: Is the Intel Core i7-14700K a bottleneck in Archeage at 4K resolution?

A: No, the data shows that the CPU is not the limiting component at 4K. The GPU’s performance, indicated by the drop to 26.3 FPS at High settings, is the primary constraint.

Q: What is the best preset for 1440p gaming with this combination?

A: The Medium preset offers the best experience at 2560x1440, achieving 74.3 FPS, which is significantly higher than the High preset’s 49.4 FPS.

Q: What is the lowest average frame rate recorded in the measured data?

A: The lowest average frame rate is 22.9 FPS, recorded at 3840x2160 resolution with the Ultra settings preset.

Q: What is the percentile ranking of the Intel Core i7-14700K compared to all CPUs?

A: The i7-14700K is in the 96th percentile of all CPUs, with an average benchmark score of 70074, placing it among the top performers.