Archeage
This combination offers playable performance with an average of 31 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 12 | 12 | 21 | 24 |
| 1440p QHD | 16 | 26 | 38 | 41 |
| 1080p Full HD | 27 | 38 | 54 | 60 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 9 9950X3D + NVIDIA GeForce GTX 1650, In-Depth Analysis
ArcheAge’s measured performance with the AMD Ryzen 9 9950X3D and NVIDIA GeForce GTX 1650 reveals a system that is heavily constrained by its graphics card. The data shows a steep performance cliff as resolution climbs, but the pattern is not uniform across all settings, indicating where the bottleneck lies and how the game’s engine reacts to different loads.
Resolution Scaling
The transition from 1080p to 4K produces a dramatic collapse in frame rates, but the severity depends entirely on the quality preset. At Low settings, the average frame rate falls from 59.8 FPS at 1920x1080 to 40.9 FPS at 2560x1440, a drop of roughly one-third. Pushing further to 3840x2160, the average plummets to 24 FPS, which represents a 60% loss from the 1080p baseline. This scaling curve is typical of a GPU that is running out of pixel throughput, as the GTX 1650’s 53.28 GPixel/s pixel rate becomes the limiting factor.
The Medium preset shows a similar trajectory: 53.9 FPS at 1080p, 37.8 FPS at 1440p, and 21 FPS at 4K. The High preset, however, reveals a more aggressive drop-off. At 1080p, High settings produce 37.5 FPS, which falls to 25.7 FPS at 1440p and then to a barely playable 11.7 FPS at 4K. This non-linear behavior suggests that beyond the raw resolution increase, the High preset adds shading complexity that the GPU’s 896 shading units cannot handle efficiently.
The Ultra preset is the most punishing. It delivers 26.6 FPS at 1080p, but that already low number collapses to 15.8 FPS at 1440p and 11.8 FPS at 4K. Interestingly, the gap between High and Ultra narrows at 4K—11.7 FPS versus 11.8 FPS—indicating that at this resolution, both presets are equally bottlenecked by the GPU’s fixed hardware limits rather than the specific settings. The data suggests that the CPU, with its 16 cores and 32 threads, is never the limiting factor in any of these scenarios; the frame rate curves are entirely consistent with a GPU-bound system.
GPU Role
The NVIDIA GeForce GTX 1650 is the clear performance ceiling in this configuration. Its 4 GB of GDDR5 memory on a 128-bit bus provides 128.1 GB/s of bandwidth, which is modest by modern standards. The benchmark results indicate that this memory capacity and bandwidth become critical at higher resolutions, where the frame rate drops below 12 FPS at 4K on both High and Ultra presets. The 4 GB frame buffer is likely being saturated by the larger textures and higher detail levels required at 3840x2160.
The GPU’s clock behavior shows a base clock of 1485 MHz and a boost clock of 1665 MHz. These clocks are relatively low compared to the GPU’s rivals, and the data shows that the GTX 1650 sits at the 43rd percentile among all GPUs. Its average benchmark score of 8713 places it nearly even with the NVIDIA Quadro P2200, which scores 8671 with a delta of 0.5%. The GTX 1650 also trails the AMD Radeon Pro WX 5100 by 0.5%, which scores 8761. This tight grouping around the 8700-8800 score range confirms that the GTX 1650 is a mid-to-low tier card that struggles with modern MMORPG graphics loads.
The GPU’s DirectX performance scores reinforce this picture. The PassMark DirectX 12 score is 35, while DirectX 11 scores 58 and DirectX 9 scores 124. ArcheAge, being a 2014 title, likely relies on older DirectX paths, but the low scores across all API versions indicate that the hardware itself is the constraint. The GPU’s FP32 performance of 2.984 TFLOPS is the raw compute ceiling, and the data shows that even at 1080p Low, the card only manages 59.8 FPS—just shy of a 60 FPS target, and only at the lowest settings.
Settings Recommendations
The measured FPS rows provide a clear hierarchy for playability. At 1920x1080, the Low preset delivers 59.8 FPS, which is the only configuration that approaches a smooth 60 FPS experience. Medium settings at 1080p yield 53.9 FPS, which is still acceptable for an MMORPG, but the drop to 26.6 FPS on Ultra makes that preset nearly unplayable. The data indicates that for 1080p, the Medium preset is the optimal balance, offering a 10% reduction in frame rate compared to Low while presumably providing much better visual quality.
At 2560x1440, the situation becomes more difficult. Low settings produce 40.9 FPS, which is playable but not smooth. Medium settings drop to 37.8 FPS, and High falls to 25.7 FPS. The Ultra preset at 15.8 FPS is not viable. For 1440p, the data recommends staying on Low or Medium, with Low being the safer choice for consistent frame pacing.
At 3840x2160, no preset is viable. The best result is 24 FPS on Low, which is below the threshold for comfortable gameplay. High and Ultra both hover around 11.7-11.8 FPS, which is a slideshow. The data strongly suggests that 4K is not a realistic target for this GPU in ArcheAge, regardless of settings. The recommendation is to play at 1080p with Medium or Low settings, or to accept 1440p Low as a compromise for higher resolution.
FAQ
Q: Can this system run ArcheAge at 60 FPS?
A: Only at 1080p with the Low preset, which averages 59.8 FPS. Medium settings at 1080p yield 53.9 FPS, so a 60 FPS lock is only possible on the lowest quality settings.
Q: What is the best resolution for this GPU in ArcheAge?
A: The data shows 1920x1080 as the only resolution where playable frame rates are achieved. At 2560x1440, the highest average is 40.9 FPS on Low, and at 3840x2160, even Low settings only reach 24 FPS.
Q: How does the GTX 1650 compare to its nearest rivals in this game?
A: The GTX 1650’s average benchmark score of 8713 is nearly identical to the NVIDIA GeForce RTX 3050 A Mobile (8746, -0.4%) and the AMD Radeon 550X (8749, -0.4%). It is 0.5% ahead of the Quadro P2200 but 0.5% behind the Radeon Pro WX 5100.
Q: Is the Ryzen 9 9950X3D holding back the GTX 1650?
A: No. The CPU’s benchmark scores, including a Cinebench R23 multicore score of 59712 and a single-core score of 8430, place it at the 96th percentile among all CPUs. The frame rate data shows a GPU-bound system, as the CPU’s performance is far above what the GTX 1650 can utilize.
Q: Is 4 GB of VRAM enough for ArcheAge?
A: The data indicates that 4 GB is insufficient for 4K resolutions, where frame rates drop below 12 FPS on High and Ultra. At 1080p, the memory is adequate, as frame rates are playable, but the 128.1 GB/s bandwidth becomes a constraint at higher resolutions.
Q: What is the expected performance at 1440p Medium?
A: The measured average is 37.8 FPS. This is below the 60 FPS target but may be acceptable for MMORPG gameplay, though the Low preset at 40.9 FPS offers slightly better performance.
CPU Role
The AMD Ryzen 9 9950X3D is an extreme overmatch for the GTX 1650 in this game. With 16 cores and 32 threads based on the Zen 5 architecture, the CPU’s benchmark results are staggering. The Cinebench R23 multicore score of 59712 and single-core score of 8430 place it in the 96th percentile of all CPUs, with an average benchmark score of 71660. This puts it 0.9% ahead of the Intel Xeon Platinum 8270 (71056) and 1.8% ahead of the AMD Ryzen 9 9950X (70420). It also leads the Intel Core i7-14700KF (70104) by 2.2%, while trailing the Intel Xeon 6517P (73050) by 1.9%.
In ArcheAge, the CPU’s 128 MB of shared L3 cache and 5.70 GHz boost clock are irrelevant because the frame rates are so low. The data shows that at 1080p Low, the system only achieves 59.8 FPS, which means the CPU is waiting on the GPU almost all the time. The CPU’s PassMark multithread score of 70255 and single-thread score of 4737 are far beyond what an MMORPG from 2014 can leverage, even in crowded player hubs.
The CPU’s memory bandwidth of 89.6 GB/s and DDR5 support are similarly wasted in this configuration. Even at 4K, where the GPU is most stressed, the frame rates do not improve with lower settings—they get worse—which proves that the CPU is not the bottleneck. The system’s combo rank of 1670 out of 1727 combinations suggests that this pairing is one of the least effective for this game, precisely because the CPU’s power is squandered by the GPU’s limitations. For this title, the Ryzen 9 9950X3D could easily drive a much more powerful graphics card, but with the GTX 1650, it simply idles while waiting for frames to be rendered.
Hardware Specifications
AMD Ryzen 9 9950X3D
NVIDIA GeForce GTX 1650
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9950X3D + NVIDIA GeForce GTX 1650 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 24.0 |
| 3840x2160 | Medium | 21.0 |
| 3840x2160 | Ultra | 11.8 |
| 3840x2160 | High | 11.7 |
| 2560x1440 | Low | 40.9 |
| 2560x1440 | Medium | 37.8 |
| 2560x1440 | High | 25.7 |
| 2560x1440 | Ultra | 15.8 |
| 1920x1080 | Low | 59.8 |
| 1920x1080 | Medium | 53.9 |
| 1920x1080 | High | 37.5 |
| 1920x1080 | Ultra | 26.6 |
Archeage with Ryzen 9 9950X3D + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with GTX 1650 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 9 9950X3D + GTX 1650
Explore FPS benchmarks for other games using this same hardware combination.