Archeage

Archeage, a 2014 MMORPG, exhibits a distinct performance profile when paired with the AMD Ryzen 5 8400F and AMD Radeon RX 7600. The measured data reveals a configuration that scales predictably with resolution and settings, providing a clear picture of where the system's strengths and limitations lie for this specific title.

Resolution Scaling

The transition from 1080p to 4K demonstrates a significant and expected drop in frame rates, which is characteristic of a GPU-bound scenario at higher resolutions. At 1920x1080, the combo delivers a robust 129 FPS on Low settings. Moving to 2560x1440, that figure falls to 87 FPS, a reduction of approximately 32.5%. At 3840x2160, the average further declines to 50 FPS on Low settings. This pattern indicates that the RX 7600 is the primary limiting factor as the pixel count increases, as the frame rate is directly tied to the GPU's rendering load.

The scaling from Medium to High settings at each resolution provides additional insight. At 1080p, the drop from Medium (115 FPS) to High (78 FPS) is a substantial 32% reduction, suggesting that the High preset introduces a significant increase in shader or texture complexity that heavily taxes the GPU. At 1440p, the same settings drop from 77 FPS to 53 FPS, a 31% reduction, showing a consistent relative cost for the High preset across these resolutions. The 4K results follow suit, with Medium at 44 FPS and High at 30 FPS, a 32% decrease. This consistency across resolutions for the same settings gap points to a uniform GPU workload increase from the High preset, rather than a CPU bottleneck at lower resolutions.

The Ultra preset shows a different scaling behavior. At 1080p, Ultra achieves 53 FPS, which is slightly more than half of the High preset's 78 FPS. This disproportionate drop suggests that the Ultra preset contains effects or settings that have a non-linear performance cost, potentially taxing the GPU's memory bandwidth or compute units heavily. The 1440p Ultra result of 36 FPS and the 4K Ultra result of 21 FPS further confirm this, as the scaling from High to Ultra is consistently around 40-45% of the High preset's performance. The data indicates that the system is firmly GPU-limited at all tested resolutions, with no evidence of the CPU creating a bottleneck that would flatten the frame rate curve at lower resolutions.

CPU Role

The AMD Ryzen 5 8400F features 6 cores and 12 threads, operating at a base clock of 4.20 GHz and a boost clock of 4.70 GHz. This processor, based on the Zen 4 architecture, provides a substantial amount of single-threaded and multi-threaded processing power. In the context of Archeage, an MMORPG where many game logic and networking tasks are often handled by fewer threads, the CPU's strong single-core performance is crucial. The benchmark data for the CPU shows a 3DMark single-thread score of 951, while its multi-threaded score reaches 6165, indicating a balanced profile that can handle both the main game thread and background tasks.

In this specific configuration, the CPU's role appears to be providing a solid foundation that does not restrict the GPU. The consistent frame rate scaling from 1080p to 4K, as described in the Resolution Scaling section, is a hallmark of a GPU-bound scenario. If the CPU were the limiting component, we would expect to see a plateau in frame rates at lower resolutions where the GPU has more headroom. However, the data shows a clear and continuous decline in FPS as resolution increases, which strongly suggests that the Ryzen 5 8400F is feeding the RX 7600 with enough data to keep it fully utilized. The CPU's high boost clock of 4.70 GHz is likely a key factor in avoiding a bottleneck, as it ensures that the main game thread can process draw calls and game logic quickly enough to maintain the high frame rates seen at 1080p.

The CPU's percentile rank of 77 among all CPUs indicates it is a capable performer. Its nearest rival, the AMD Ryzen 5 7500F, has an average benchmark score that is only 0.2% different, underscoring that the 8400F is positioned in a highly competitive performance tier. For Archeage, which is not typically known for extreme multi-core scaling, the Ryzen 5 8400F's combination of a high single-thread score (Cinebench R23 single-core score of 2943) and a respectable multi-thread score (Cinebench R23 multicore score of 20851) ensures that the processor is more than sufficient to support the GPU's output, allowing the graphics card to be the definitive performance limiter.

FAQ

Q: What is the highest average frame rate achievable with this combo?

A: The highest measured average frame rate is 129 FPS, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, the system is only able to produce an average of 30 FPS on High settings and 21 FPS on Ultra settings. The most playable 4K option is the Low preset, which yields 50 FPS.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data indicates the GPU is the limiting component. The frame rate drops consistently with every increase in resolution from 1080p to 4K, which is a clear indicator of a GPU bottleneck. The CPU's high boost clock and strong single-thread performance appear sufficient to keep the GPU fed.

Q: What is the performance difference between Medium and High settings at 1440p?

A: At 2560x1440, the Medium preset delivers an average of 77 FPS, while the High preset delivers 53 FPS. This represents a 31% performance cost for moving from Medium to High settings.

Q: How does the combo rank among all tested configurations for this game?

A: This specific combination of the AMD Ryzen 5 8400F and AMD Radeon RX 7600 ranks 2592 out of 3708 tested combos for Archeage.

Q: What is the average frame rate on the Medium preset at 1080p?

A: At 1920x1080 with the Medium preset, the system achieves an average frame rate of 115 FPS, with a minimum of 98 FPS and a maximum of 132 FPS.

Measured FPS Breakdown

At 1920x1080, the system shows a wide range of performance depending on the graphics preset. On Low settings, the average frame rate is 129 FPS, which is the highest score in the entire dataset. The Medium preset delivers a strong 115 FPS average, with a minimum of 98 FPS and a maximum of 132 FPS, indicating a smooth experience with no major dips. Moving to High settings, the average drops to 78 FPS, and the Ultra preset further reduces the average to 53 FPS. The scaling from Low to Ultra at this resolution shows a total performance range of 76 FPS, demonstrating that the GPU has significant headroom at 1080p to handle higher graphical loads.

At 2560x1440, the frame rates scale down proportionally. The Low preset yields an average of 87 FPS. The Medium preset averages 77 FPS, with a minimum of 66 FPS and a maximum of 89 FPS. The High preset averages 53 FPS, and the Ultra preset averages 36 FPS. The drop from 1080p to 1440p on the Low preset is from 129 FPS to 87 FPS, which is a 32.5% reduction, illustrating the increased pixel workload. The Medium preset's minimum of 66 FPS at 1440p is still respectable, suggesting that this setting is viable for gameplay.

At 3840x2160, the system is clearly pushed to its limits. The Low preset manages an average of 50 FPS, which is playable but not high-refresh. The Medium preset averages 44 FPS, with a minimum of 38 FPS and a maximum of 51 FPS. The High preset drops to an average of 30 FPS, and the Ultra preset falls to 21 FPS. The data shows that at 4K, only the Low and Medium presets provide average frame rates that are consistently above 40 FPS, while the High and Ultra presets are not suitable for smooth gameplay. The absence of a minimum FPS value for some settings suggests that the frame times are relatively stable, but the low averages at 4K High and Ultra clearly indicate a heavy rendering load.

How This Combo Ranks

The AMD Ryzen 5 8400F and AMD Radeon RX 7600 combination holds a rank of 2592 out of 3708 tested combos for Archeage. This places it in the lower third of all tested systems, specifically in the 30th percentile of performance for this game. This ranking is a direct consequence of the RX 7600's performance class. The GPU's percentile rank of 57 among all GPUs suggests it is an average to slightly above-average card, but in the context of Archeage, it is not enough to secure a top-tier position.

The CPU's rank is notably higher, at the 77th percentile among all CPUs. This disparity between the CPU and GPU ranks further confirms that the RX 7600 is the component holding this combo back from achieving a higher overall rank. The GPU's nearest rival, the NVIDIA GeForce RTX 3050 OEM, has an average score that is only 0.2% different, indicating that the RX 7600 is performing exactly in line with its expected tier. While the CPU is a strong performer, the combo's overall rank of 2592 is primarily dictated by the GPU's capabilities in this specific title, which is a common scenario for graphically intensive games.

Settings Recommendations

For players seeking the highest frame rates, the 1920x1080 resolution with the Low preset is the only option that breaks past the 120 FPS mark, hitting 129 FPS. However, the Medium preset at 1080p offers a better balance of visual quality and performance, delivering 115 FPS on average and never dropping below 98 FPS, which is ideal for high-refresh-rate monitors. The High preset at 1080p is also viable at 78 FPS, providing a solid visual upgrade for a modest frame rate cost.

At 2560x1440, the Medium preset is the recommended choice for a smooth experience, as it maintains an average of 77 FPS with a minimum of 66 FPS. The Low preset at this resolution yields 87 FPS, but the visual downgrade from Medium is often significant. The High preset at 53 FPS is playable but may not feel as fluid, and Ultra at 36 FPS should be avoided for serious gameplay.

For 3840x2160, the options are limited. The Low preset, which averages 50 FPS, is the most sensible choice for 4K gaming, as it is the only preset that consistently stays above the 30 FPS threshold. The Medium preset at 44 FPS is also an option for a better-looking image, but its lower minimum of 38 FPS could be noticeable in busy scenes. The High and Ultra presets at 4K are not recommended due to their low average frame rates of 30 FPS and 21 FPS, respectively. The data shows that for the best experience, users should prioritize either 1080p with Medium or High settings, or 1440p with Medium settings.

GPU Role

The AMD Radeon RX 7600, based on the RDNA 3.0 architecture, is the clear performance limiter for this combo in Archeage. Its 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 288.0 GB/s, which is sufficient for 1080p and 1440p gaming but becomes a bottleneck at 4K. The GPU's boost clock of 2655 MHz and its 2048 shading units are responsible for the frame rates seen across all resolutions. The data shows that the GPU is heavily taxed by the Ultra preset, which likely utilizes memory-intensive effects that expose the limitations of the 8 GB VRAM capacity and memory bus width.

The GPU's benchmark scores paint a picture of a mid-range part. Its Passmark G3D score is 16634, and it has a percentile rank of 57 among all GPUs. Its nearest rival, the NVIDIA GeForce RTX 3050 OEM, has a nearly identical average benchmark score, with a delta of only -0.2%. This indicates that the RX 7600 is performing as expected for its class. However, in Archeage, the demands of the 4K resolution and Ultra settings are simply too much for this GPU. The frame rate collapse from 129 FPS at 1080p Low to 21 FPS at 4K Ultra highlights the GPU's inability to maintain high throughput at higher pixel counts. The GPU's 8 GB of VRAM is likely a contributing factor to the poor performance at 4K Ultra, as the game may be exceeding the available memory, leading to texture swapping and frame drops. The data conclusively shows that while the CPU is more than capable, the RX 7600's specifications dictate the overall performance ceiling for this combination.