Archeage

# Archeage with AMD Ryzen 5 7400F + AMD Radeon RX 6600

The AMD Ryzen 5 7400F paired with the AMD Radeon RX 6600 produces a distinctive performance profile in Archeage, a 2014-released MMORPG. Measured data across three resolutions and four settings presets reveals a system that delivers smooth 1080p gameplay at lower presets but struggles significantly as resolution and quality demands escalate. This combination ranks 2165th out of 2761 tested combos in this specific game, placing it in the lower third of all tested configurations — a result that invites investigation into whether the CPU or GPU is the primary constraint.

Resolution Scaling

The measured FPS data shows a steep and consistent decline as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate drops from 118 FPS at 1080p to 79 FPS at 1440p, then further to 45 FPS at 4K. This represents a 38% reduction from 1080p to 1440p, followed by another 43% drop moving to 4K. The pattern is similar across all presets, though the absolute numbers differ.

At Medium settings, the progression is 105 FPS at 1080p, 71 FPS at 1440p, and 40 FPS at 4K. The High preset yields 71 FPS at 1080p, 48 FPS at 1440p, and 27 FPS at 4K. Ultra settings show the most dramatic scaling: 49 FPS at 1080p, 33 FPS at 1440p, and just 19 FPS at 4K.

The resolution scaling behavior reveals a system that is heavily GPU-limited at higher resolutions. The RX 6600, with its 8 GB GDDR6 memory and 128-bit bus width, simply cannot sustain playable frame rates at 4K in this title. The pixel rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s become bottlenecks when rendering at 3840x2160, where the GPU must process four times as many pixels as at 1080p.

Interestingly, the gap between 1440p and 4K is proportionally larger than the gap between 1080p and 1440p. At Low settings, the 1080p-to-1440p drop is 39 FPS, while the 1440p-to-4K drop is 34 FPS. This suggests that the GPU is approaching its memory bandwidth ceiling at 4K, as the 224.0 GB/s bandwidth becomes insufficient for the increased data demands.

The data implies that 1080p is the practical ceiling for this combination in Archeage, with 1440p being marginal at best. At 4K, even the lowest settings produce an average of only 45 FPS, which falls below the threshold for smooth gameplay in most scenarios. The scaling pattern strongly indicates that the RX 6600 is the limiting component at higher resolutions, while the CPU's role becomes more apparent at lower resolutions.

How This Combo Ranks

Within the benchmark database, this specific CPU-GPU combination ranks 2165th out of 2761 tested combos for Archeage, placing it in the 78th percentile from the bottom. This ranking positions it well below the median tested configuration, suggesting that many other hardware pairings deliver superior performance in this MMORPG.

The CPU itself, the Ryzen 5 7400F, performs respectably in general benchmarks. Its average benchmark score of 32750 places it in the 83rd percentile against all CPUs. The nearest rival, the AMD Ryzen 7 PRO 6850H, scores 32812, representing a 0.2% delta in favor of the rival. The Intel Core i5-14600T scores 32707, a 0.1% deficit against the 7400F. These margins are negligible, indicating the CPU is competitive with its direct peers.

The GPU, however, tells a different story. The RX 6600's average benchmark score of 19036 places it in the 63rd percentile against all GPUs. Its nearest rival, the NVIDIA Quadro K6000, scores 19030 with a 0% delta, while the NVIDIA GeForce RTX 4050 Mobile scores 19049 with a -0.1% delta. These tight margins suggest the GPU is solidly mid-range but not exceptional.

The combination's low in-game ranking relative to the individual component percentiles suggests that Archeage is particularly demanding on the GPU or that the specific pairing creates an imbalance. Given the game's 2014 release date, it likely relies more heavily on single-threaded CPU performance and raw GPU throughput. The Ryzen 5 7400F's strong single-core performance (3072 in Cinebench R23 single-core) should be sufficient, but the RX 6600's mid-range positioning appears to drag the overall experience down.

The ranking also implies that many other tested combos feature more powerful GPUs or better CPU-GPU balance for this specific title. The data suggests that users seeking better Archeage performance should prioritize GPU upgrades over CPU changes, as the 7400F is unlikely to be the limiting factor in most scenarios.

FAQ

Q: Can this combination run Archeage at 4K resolution?

A: The data shows that at 4K, the maximum average FPS achieved is 45 at Low settings, with Medium at 40 FPS, High at 27 FPS, and Ultra at 19 FPS. Only the Low preset approaches playable territory, and even that falls short of smooth 60 FPS gameplay.

Q: What is the best resolution for this hardware in Archeage?

A: At 1920x1080, the system achieves 118 FPS on Low, 105 FPS on Medium, 71 FPS on High, and 49 FPS on Ultra. This is the only resolution where any preset exceeds 60 FPS, making 1080p the recommended resolution for this combination.

Q: How does the CPU compare to its nearest rivals in benchmark scores?

A: The Ryzen 5 7400F scores 32750 on average, which is 0.1% higher than the Intel Core i5-14600T (32707) and 0.2% higher than the Intel Core Ultra 7 155H (32697). It trails the AMD Ryzen 7 PRO 6850H (32812) by 0.2%.

Q: Is the GPU the bottleneck at higher resolutions?

A: The data strongly suggests yes. At 4K, the RX 6600's frame rates drop dramatically across all presets, and the GPU's 63rd percentile ranking against all GPUs indicates it lacks the raw throughput for high-resolution gaming in this title.

Q: What frame rates can be expected at 1440p with Medium settings?

A: The measured data shows an average of 71 FPS at 1440p Medium, with minimum and maximum values of 60 and 81 FPS respectively. This is the only 1440p configuration that maintains an average above 60 FPS.

Q: How does this combo's in-game rank compare to its component percentiles?

A: The combination ranks 2165th out of 2761 combos (78th percentile from bottom), while the CPU sits in the 83rd percentile and the GPU in the 63rd percentile. The lower in-game rank indicates the GPU pulls down overall performance more than the CPU's strength compensates.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance. Low settings produce an average of 118 FPS, which is the highest measured value across all configurations. Medium settings average 105 FPS with a minimum of 89 FPS and maximum of 121 FPS, indicating consistent performance. High settings drop to 71 FPS average, while Ultra falls to 49 FPS.

Moving to 2560x1440, performance diminishes noticeably. Low settings average 79 FPS, which remains playable but represents a substantial drop from 1080p. Medium settings average 71 FPS with a range of 60 to 81 FPS. High settings average 48 FPS, and Ultra drops to 33 FPS. The 1440p Medium configuration is the only one at this resolution that maintains an average above 60 FPS.

At 3840x2160, the system struggles across all presets. Low settings average 45 FPS, Medium averages 40 FPS with a range of 34 to 46 FPS, High averages 27 FPS, and Ultra averages just 19 FPS. None of these configurations achieve the 60 FPS threshold commonly associated with smooth gameplay.

The data reveals a consistent pattern: each resolution step roughly halves the frame rate at equivalent settings. For instance, High settings produce 71 FPS at 1080p, 48 FPS at 1440p, and 27 FPS at 4K. This geometric progression indicates a GPU-bound scenario where the RX 6600's capabilities are exhausted as pixel count increases.

The Medium preset consistently provides the most stable frame times, as evidenced by the recorded minimum and maximum values at each resolution. At 1080p Medium, the range is 89-121 FPS; at 1440p Medium, it's 60-81 FPS; and at 4K Medium, it's 34-46 FPS. This stability suggests that Medium settings offer the best balance between visual quality and performance consistency.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, manufactured on TSMC's 5 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65W TDP. The CPU features 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache, with a dual-channel DDR5 memory interface providing 83.2 GB/s of bandwidth.

In Archeage, a game originally released in 2014, the CPU's role is critical for handling game logic, NPC AI, and network processing typical of MMORPGs. The 7400F's strong single-core performance, evidenced by a Cinebench R23 single-core score of 3072, is particularly relevant for this genre, where single-threaded performance often dictates overall responsiveness.

The CPU's multi-core capabilities are also robust, with a Cinebench R23 multi-core score of 21765 and a Passmark multithread score of 25645. These results indicate that the processor can handle the background tasks and multiple character interactions common in Archeage without becoming a bottleneck.

However, the measured FPS data suggests that the CPU is not the primary constraint in this pairing. At 1080p Low, the system achieves 118 FPS, which is likely near the CPU's limit in this game. The fact that increasing resolution causes frame rates to drop proportionally indicates that the GPU becomes the limiting factor before the CPU's capabilities are fully exhausted.

The CPU's 83rd percentile ranking against all CPUs, combined with its competitive standing against rivals like the Intel Core i5-14600T (0.1% delta) and AMD Ryzen 7 PRO 6850H (-0.2% delta), confirms that the 7400F is a capable processor. In Archeage specifically, its performance is likely more than adequate for the game's computational demands, leaving the GPU as the determining factor for frame rates.

Settings Recommendations

Based on the measured FPS data, the optimal settings configuration depends heavily on the target resolution and desired frame rate. For players prioritizing smooth gameplay at 60 FPS or higher, 1080p with Medium settings is the clear recommendation, delivering an average of 105 FPS with a minimum of 89 FPS.

At 1440p, the Medium preset is the only configuration that maintains an average above 60 FPS, achieving 71 FPS with a minimum of 60 FPS. This represents the best balance between visual quality and performance for users with 1440p displays, though the margin for error is slim.

The High preset offers a reasonable compromise at 1080p, with 71 FPS average, but drops below 60 FPS at 1440p (48 FPS) and becomes unplayable at 4K (27 FPS). For users who prioritize visual fidelity over raw frame rates, 1080p High is viable, but the jump to Medium provides a substantial 48% performance increase (from 71 to 105 FPS) at 1080p.

Ultra settings are only recommended for players who accept sub-60 FPS gameplay. At 1080p, Ultra averages 49 FPS, which may be acceptable for slower-paced MMORPG content but will feel less responsive in combat scenarios. At higher resolutions, Ultra becomes increasingly impractical, with 33 FPS at 1440p and 19 FPS at 4K.

The data indicates that Medium settings offer the most consistent frame times across all resolutions, as evidenced by the minimum FPS values being closest to the averages. This stability is particularly important in a MMORPG where frame time spikes can be disruptive during large-scale battles or crowded areas.

For players with 4K displays, the Low preset at 45 FPS average is the only marginally playable option, but the visual compromise may not be worth the resolution advantage. In this case, running at 1440p Medium or 1080p High provides a better overall experience.

GPU Role

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture using TSMC's 7 nm process, featuring the Navi 23 chip with 11,060 million transistors on a 237 mm² die. It operates with a base clock of 1626 MHz, a game clock of 2044 MHz, and a boost clock of 2491 MHz, with 8 GB of GDDR6 memory on a 128-bit bus providing 224.0 GB/s of bandwidth.

The GPU's specifications are modest by modern standards, with 1792 shading units, 112 texture mapping units, and 64 render output units. Its compute capabilities include 8.928 TFLOPS of FP32 performance and 17.86 TFLOPS of FP16 performance, along with 28 ray tracing cores. The 132W TDP and single 8-pin power connector indicate a power-efficient design.

In Archeage, the RX 6600's performance is the dominant factor in determining frame rates, particularly at higher resolutions. The GPU's 63rd percentile ranking against all GPUs places it in the mid-range tier, and the measured FPS data confirms that it struggles to maintain playable frame rates at 1440p and above.

The GPU's memory configuration is a potential limitation in this pairing. With only 8 GB of GDDR6 memory on a 128-bit bus, the RX 6600 may face bandwidth constraints in Archeage, especially at 4K where the demand for texture data increases substantially. The 224.0 GB/s bandwidth is sufficient for 1080p and 1440p gaming but becomes strained at higher resolutions.

The GPU's benchmark scores provide additional context. Its Passmark G3D score of 15096 and 3DMark Steel Nomad DX12 score of 1492 indicate solid mid-range performance, while its Geekbench Vulkan score of 67623 shows competent API support. However, these scores do not translate to strong Archeage performance, as the game's rendering requirements appear to exceed the GPU's capabilities at higher resolutions.

The comparison to nearest rivals is telling. The NVIDIA Quadro K6000 scores 19030 (0% delta), the RTX 4050 Mobile scores 19049 (-0.1% delta), and the RTX 2000 Ada Generation scores 18954 (0.4% delta). These near-identical scores suggest the RX 6600 is solidly positioned in its performance tier, but that tier is simply insufficient for demanding 4K gaming in Archeage.

The GPU's end-of-life production status and 2021 release date indicate it is a last-generation product. For Archeage players seeking better performance, the data suggests that upgrading the GPU would yield more significant improvements than upgrading the CPU, given that the CPU already performs well relative to its peers.